Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Hydraulic Compressor for Hydrogen Station

수소스테이션용 유압 압축기 개발

  • Cho, Sung-Min (Institute of Gas Safety R&D, Korea Gas Safety Corporation) ;
  • Roh, Gyeong-gil (Institute of Gas Safety R&D, Korea Gas Safety Corporation) ;
  • Yeom, Ji-woong (Institute of Gas Safety R&D, Korea Gas Safety Corporation) ;
  • lee, Seung-kuk (Institute of Gas Safety R&D, Korea Gas Safety Corporation) ;
  • Lyu, Sung-ki (School of Mechanical & Aerospace Eng., ReCAPT, Gyeongsang National University)
  • Received : 2018.10.05
  • Accepted : 2018.11.12
  • Published : 2018.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Major producers have already built compressors since World War I and have been monopolizing all domestic and overseas markets based on the accumulated technology, and the dependency of the manufacturers over the entire industry is deepening. Therefore, it is expected that the technological gap with developed countries will be larger without development of the related technology. Therefore, it is necessary to develop a unique technology for a new type of high efficiency compression system. In this study, we present localization of Hydraulic Compressor which can meet the technical trends such as cost reduction, efficiency improvement, environmental friendliness, wide operating range, low capacity / high capacity compatibility, size reduction, easy operation and easy maintenance.

Keywords

References

  1. Lee, H. R., Ahn, J. H., Shin, J. O., Kim, H. Y., "Design of a Cylinder Valve Solenoid for a CNG Vehicle using Electromagnetic Field Analysis," The Korea Society of Manufacturing Process Engineers, Vol. 15, No. 2, 2018, pp. 89-96, 2018.
  2. G. Bidini, C. N. Gfimaldi, L. Postrioti, "Performance analysis of a hydraulic air compressor", SAGE., Vol. 213, Issue. 3, 1999, pp. 191-203, May 1999.
  3. Gasche, J.L., Ferreira, R.T.S., Prata, A.T., "Pressure distributions along eccentric circular valve reeds of hermetic compressors, Proceedings of the International Compressor", Engineering Conference an Purdue West Lafayette, USA, IV, pp. 1189-1198, 1992.
  4. Cho, I. S., "Dynamic Behavior Characteristics of Piston in Reciprocating Compressor", Journal of the KSTLE Vol. 29, No. 2, pp. 105-110, 2013.
  5. Lee, S. S., Chung, W. J., Lim, D. J., Cha, T. H., Kim, T. S, Lee, J. S., Choi, K. S. "SimulationX$^{(R)}$ based Modeling for Valve-Plate Notch Design of Variable Swash-Plate Axial Piston Pump", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 4, pp. 104-112, 2018. https://doi.org/10.14775/ksmpe.2018.17.4.104
  6. Kim, M. W., Hur, K. D., Ye, S. D, "Finite Element Analysis for the Piston Pump Tube Design", Journal of the Korean Society of Manufacturing Process Engineers, pp. 108-109, 2015.
  7. Hibbit, ABAQUS/STANDARD User's manual Ver. 5.8, Karlsson & Sorensen, INC., 1998.
  8. Han, K. T., "A Study on Pressure Vessel using Cold Stretch Method," The Korea Society of Manufacturing Process Engineers, Vol. 17, No. 1, 2018, pp. 153-160, 2018.

Cited by

  1. Hydraulic Compressor Safety Test for Hydrogen Stations vol.19, pp.11, 2018, https://doi.org/10.14775/ksmpe.2020.19.11.008