DOI QR코드

DOI QR Code

A Study on Surface Characteristics of High Tensile Brass with Molybdenum Flame Spray Treatment

고력황동의 몰리브덴 화염용사에 따른 표면 특성에 관한 연구

  • Jung, Dong-Hyun (School of Automotive Engineering, Gyeongnam National University of Science and Technology) ;
  • Kim, Hae-Ji (Department of Automotive Engineering, Gyeongnam National University of Science and Technology)
  • 정동현 (경남과학기술대학교 대학원 자동차공학과) ;
  • 김해지 (경남과학기술대학교 자동차공학과)
  • Received : 2018.08.17
  • Accepted : 2018.09.06
  • Published : 2018.12.31

Abstract

Molybdenum flame spray coatings are widely used in industrial fields to enhance the performance of mechanical component parts such as pistons, shafts and clutches. This study investigates the surface characteristics of high tensile brass with molybdenum flame spray treatment using the clutch material for small ship. The surface characteristics after molybdenum flame spray treatment in high tensile brass were quantitatively analyzed for surface composition, coating layer thickness, friction coefficient, abrasion width and phenomenon, micro-hardness, and surface roughness.

Keywords

References

  1. Li, Y. J., Liang, T. Q., Ao, R., Zhao, H. and Zeng, J. M., "Oxidation resistance of iron-based coatings by supersonic arc spraying at high temperature," Surface and Coatings Technology, Vol. 347, pp. 99-112, 2018. https://doi.org/10.1016/j.surfcoat.2018.04.024
  2. Tillmann, W., Hagen, L. and Kokalj, D., "Embedment of eutectic tungsten carbides in arc sprayed steel coatings," Surface and Coatings Technology, Vol. 331, pp. 153-162, 2017. https://doi.org/10.1016/j.surfcoat.2017.10.044
  3. Kabcum, S., Tammanoon, N., Wisitsoraat, A., Tuantranont, A. and Liewhiran, C., "Role of molybdenum substitutional dopants on H2S-sensing enhancement of flame-spray-made SnO2 nanoparticulate thick films," Sensors and Actuators B: Chemical, Vol. 235, pp. 678-690, 2016. https://doi.org/10.1016/j.snb.2016.05.129
  4. Martin, H., Thomas K., Pablo, B., Anker, D. J. and Grunwaldt, J. D., "Structure, activity and kinetics of supported molybdenum oxide and mixed molybdenum-vanadium oxide catalysts prepared by flame spray pyrolysis for propane OHD," Applied Catalysis A: General, Vol. 472, pp. 29-38, 2014. https://doi.org/10.1016/j.apcata.2013.11.027
  5. Zhang, Z., Lim, S. H., Chai, J. W., Lai, D. M. Y. and Pan, J. E., "Kerosene-fuelled high velocity oxy-fuel (HVOF) spray of Ti2AlC MAX phase powders," Journal of Alloys and Compounds, Vol. 735, pp. 377-385, 2018. https://doi.org/10.1016/j.jallcom.2017.11.157
  6. Zheng, C., Liu, Y. H., Qin, J., Ji, W. X. and Cai, B. P., "Experimental study on the erosion behavior of WC-based high-velocity oxygen-fuel spray coating," Powder Technology, Vol. 318, pp. 383-389, 2017. https://doi.org/10.1016/j.powtec.2017.06.022
  7. Purnendu, D., Soumitra, Paul. and Bandyopadhyay, P. P., "Plasma sprayed diamond reinforced molybdenum coatings," Journal of Alloys and Compounds, Vol. 767, pp. 448-455, 2018. https://doi.org/10.1016/j.jallcom.2018.07.088
  8. Sun, J., Fu, Q. G., Zhang, G. P., Wang, C. and Li, T., "Melting index of plasma sprayed molybdenum silicide characterized by constitutions and its effect on oxidation kinetics," Journal of Alloys and Compounds, Vol. 766, pp. 95-103, 2018. https://doi.org/10.1016/j.jallcom.2018.06.296
  9. Wang, Y., Wang, D., Yan, J. and Sun. A., "Preparation and characterization of molybdenum disilicide coating on molybdenum substrate by air plasma spraying," Applied Surface Science, Vol. 284, pp. 881-888, 2013. https://doi.org/10.1016/j.apsusc.2013.08.029
  10. Kim, W. B., Cho, Y. T., Jung, Y. G. and Choi, J. D. "Manufacturing Process Improvement for Precision Inner Surface Polishing of Anodizing Treated Airplane Reservoir," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 2, pp. 72-77, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.072
  11. Yoon, S. W., Kang, D. C. and Kim, J. H., "Laser Surface Treatment of Magnesium Alloy using ZrO2 for Corrosion Resistance," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 4, pp. 93-100, 2016. https://doi.org/10.14775/ksmpe.2016.15.4.093

Cited by

  1. Laser-Induced Plasma Spectroscopy Measurement on Surface Roughness in Surface Treatment of Titanium Alloys vol.19, pp.2, 2018, https://doi.org/10.14775/ksmpe.2020.19.02.009
  2. 마그네슘 합금 표면의 지르코니아 분말 레이저 소결과정에서 조사 패턴이 접합 계면 품질에 미치는 영향 vol.20, pp.2, 2021, https://doi.org/10.14775/ksmpe.2021.20.02.051