Fig. 1. Modeling of 24 person emergency brake
Fig. 2. Geometry of 24 person emergency brake
Fig. 3. Mesh generation
Fig. 4. Total deformation
Fig. 5. Strain
Fig. 6. Stress
Fig. 7. Total deformation
Fig. 8. Strain
Fig. 9. Stress
Fig. 10. Total deformation
Fig. 11. Strain
Fig. 12. Stress
Fig. 13. Total deformation
Fig. 14. Strain
Fig. 15. Stress
Fig. 16. Total deformation
Fig. 17. Strain
Fig. 18. Stress
Fig. 19. Total deformation
Fig. 20. Strain
Fig. 21. Stress
Table 1. Material properties
Table 2. Mesh
Table 3. Safety check of waiting condition
Table 4. Safety check of operating condition
References
- Korea Machinery Meter and Petrochemical Testing and Research Institute. (1999). A Study on the Technical safety Rules of Rope Brake use for Elevator.
- J. A. Nederbragt. (1989). Rope Brake, Elevator World
- William Weaver, Jr. & R. Johnston. (1993). Finite Elements for Structural Analysis. PRENTICE HALL, INC.
- S. C. Han & B. G. Lee. (2018). A Study on the Convergence Contract Behavior of Friction Heat and Pad on Disk Brake, Journal of the Korea Convergence Society, 9(1), 291-301. https://doi.org/10.15207/JKCS.2018.9.1.291
- G. W. Hwang & J. U. Cho. (2017). Convergence Study on Durability Improvement due to Radius on Arch Type at CFRP Structure with Stacking Angle, Journal of the Korea Convergence Society, 8(7), 219-224. https://doi.org/10.15207/JKCS.2017.8.4.219
- ANSYS User's Manual Revision 14.0. (2012). Swanson Analysis System, Inc.
- James shakelford & William Alexander. (1994). Material Science and Engineering Hand Book, CRC Press.
- J. S. Lee. (2013). Structural Analysis of High Pressure Cleaning Machine, Journal of the Korea Academia-Industrial cooperation Society, 14(10), 4694-4699. https://doi.org/10.5762/KAIS.2013.14.10.4694
- S. C. Park. (2014). Quality Evaluations of Induction Motors Bracket Castings during Fabrication Processes, Journal of the Korea Academia-Industrial cooperation Society, 15(9), 5474-5479. https://doi.org/10.5762/KAIS.2014.15.9.5474
- J. S. Lee. (2014). FEM Analysis of High Pressure Cleaning Machine, Journal of the Korea Academia-Industrial cooperation Society, 15(10), 5950-5954. https://doi.org/10.5762/KAIS.2014.15.10.5950
- J. H. Lee & J. U. Cho. (2015). Convergence Technique Study through Simulation Thermal Analysis due to the shape of Electric Heater, Journal of the Korea convergence Society, 6(6), 241-246. https://doi.org/10.15207/JKCS.2015.6.6.241
- J. R. Kim. (2016). Development of High Efficiency Dehumidifiers in low temperature, Journal of the Korea Academia-Industrial cooperation Society, 17(9), 206-211. https://doi.org/10.5762/KAIS.2016.17.9.206
- W. Y. Kim & S. G. Kim. (2017). The Design and Implementation of an Emergency Video call Integrated Management System based on VoIP, Journal of the Korea convergence Society, 8(12), 93-99. https://doi.org/10.15207/JKCS.2017.8.12.093
- N. H. Kim & J. H. Byeon & K.H.Lee. (2017). Shape Optimization of ball Valve for High Temperature, Journal of the Korea Academia-Industrial cooperation Society, 18(1), 15-20. https://doi.org/10.5762/KAIS.2017.18.1.15
- B. J. Kim & S. B. Lee(2017). Study on the shaping process of turbocharger nozzle slide joint, Journal of the Korea Academia-Industrial cooperation Society, 18(1), 107-114. https://doi.org/10.5762/KAIS.2017.18.1.107