초록
본 연구에서는 분기수로에서 발생되는 에너지손실을 계산하기 위한 손실계수의 경험식을 산정하기 위해 수리모형실험을 수행했다. 수리모형은 유입수로와 90도의 각도를 갖는 두 유출수로로 구성되어 있으며, 유입수로과 유출수로에서 압력수두와 속도수두를 측정하여 분기수로에서 발생되는 에너지손실을 분석했다. 각 측선에서 동수경사선의 변화를 비교한 결과, 수로의 분기점에서 동수경사선이 급격히 하강하여 에너지손실이 분기점에서 발생되었으며, 유량비의 증가에 따라 속도수두의 감소폭이 증가했다. 유량비와 Froude수가 증가함에 따라 유출량이 더 큰 수로에서 수두손실량이 지수적으로 증가하는 결과를 보였으며, 손실계수 또한 증가했다. 반면에, 유출량이 작은 수로에서는 유량비와 Froude수의 증가에 따라 손실계수가 감소하는 결과가 나타났다. 손실계수 계산결과를 이용하여 두 유출수로에서 손실계수 경험식을 제안하였으며, 경험식의 계산오차가 각각 3.91%, 5.19%로 나타났다. 그리고 두 경험식을 이용하여 계산한 총 손실계수를 실험결과와 비교하여 3.62%의 오차가 발생했다.
In this study, hydraulic experimental studies were conducted to estimate the empirical formulas of loss coefficient, which is necessary to calculate the energy loss occurred in the dividing channel junction of sewer system. The experimental apparatus was consisted of two outflow conduit with a $90^{\circ}$ angle to the inlet conduit, and the pressure and velocity heads are measured to analyze the energy losses in the branch. The measurements of the hydraulic grade line show that the hydraulic grade line was steeply descended at the dividing point due to the head loss, and the decreasing amount of velocity head increased with the increase of flowrate ratio. The head loss exponentially increased in the outlet with larger runoff as the increase of flowrate ratio and Froude number, and the head loss coefficient also increased. On the other hands, the head loss coefficients decreased in the outlet with smaller runoff as the increase of the flowrate ratio and Froude number. Using the experimental results, the empirical formulas of loss coefficient was suggested for each outlet, and the error of empirical formula was 3.91 and 5.19%, respectively. Furthermore, the total head loss coefficient calculated by the two empirical formulas was compared with the experimental results, and the error was 3.62%.