Acknowledgement
Supported by : 국방과학연구소
References
- Wells, W. W., 1996, "Solid Rocket Booster Reliability Guidebook-Volume II-Probabilistic Design and Analysis Methods for Solid Rocket Boosters," Aerospace Information Report, SAE AIR, 5006(2).
- Moon, S., 2011, "Research Trend of Solid Rocket Motor Reliability," The Korea Society of Propulsion Engineers, pp. 349-351.
- Dalal, S. R., Fowlkes, E. B. and Hoadley, B., 1989, "Risk Analysis of the Space Shuttle: pre-Challenger Prediction of Failure," Journal of the American Statistical Association, Vol. 84, No. 408, pp. 945-957.
- Kelly, D. L. and Smith, C. L., 2008, "Risk Analysis of the Space Shuttle: pre-Challenger Bayesian Prediction of Failure," NASA Space Systems Engineering and Risk Management.
- Ekstrom, J. L., Allred, A., Call, R. and Sauvageau, D., 1991, "Applying Design to Reliability Techniques to a Composite Solid Rocket Motor Case," AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Vol. 8, No. 10.
- Zheng, W., 1993, "Structural Reliability Design on Solid Rocket Motor Case," AIAA/SAE/ASME/ASEE 29th Joint Propulsion Conference and Exhibit.
- Bozkaya, K., 2006, A Study on the Reliability Analysis During Preliminary Design - A Rocket Motor Example, Doctoral dissertation, Middle East Technical University.
- Cho, S. Y., Kim, Y. W., Lee, J. H., Han, Y. M. and Oh, S. H., 2004, "A Study for Reliability Demonstration of Launch Vehicle Propulsion System," Aerospace Engineering and Technology, Vol. 3, No. 2, pp. 65-71.
- Kim, J. H., Bae, B. Y., Lee, J. W, Byun, Y. H. and Kim, K. M, 2008, " Design for Reliability of Air- Launching Rocket, Mirinae II Using FMEA (Failure Modes and Effects Analysis)," Journal of the Korea Society for Aeronautical and Space Science, Vol. 36, No. 12, pp. 1193-1200. https://doi.org/10.5139/JKSAS.2008.36.12.1193
- Moon, K. H., Gang, J. H., Kim, D. S., Kim, J. K. and Choi, J. H., 2016, "A Probabilistic based Systems Approach to Reliability Prediction of Solid Rocket Motors," International Journal of Aeronautical & Space Sciences, Vol. 17, pp. 112-121.
- Haldar, A. and Mahadevan, S., 2000, Probability, Reliability and Statistical Methods in Engineering Design, John Wiley & Sons, Inc. New York.
- Noor, A. K., 2005, Perspectives on Non-deterministic Approaches, CRC Press LLC, Boca Raton, FL.
- Hisler, A., 1964, "Sounding Rocket Reliability Reassessment," NASA Technical Note D-2222, Goddard Space Flight Center.
- Gelman, A., Carlim, J. B., Stern, H. S. and Rubin, D. B., 2004, Bayesian Data Analysis, CHAMPMAN & HALL/CRC, Inc., New York.
- Lee, H. M., 1992, "Shear Joint Capability Versus Bolt Clearance," Technical Memorandum, NASA TM- 108378.
- Ro, Y. H., Koo, S. H. and Lee, B. E., 2010, "3D Structural Analysis for Bolted Joint Part of Rocket Motor Case under Pre-torque," The Korea Institute of Military Science and Technology.
- Izumi, S., Yokoyama, T., Iwasaki, A., and Sakai, S., 2005, "Three-dimensional Finite Element Analysis of Tightening and Loosening Mechanism of Threaded Fastener," Engineering Failure Analysis, Vol. 12, No. 4, pp. 604-615. https://doi.org/10.1016/j.engfailanal.2004.09.009
- Dinger, G. and Friedrich, C., 2011, "Avoiding Self- Loosening Failure of Bolted Joints with Numerical Assessment of Local Contact State," Engineering failure analysis, Vol. 18, No. 8, pp. 2188-2200. https://doi.org/10.1016/j.engfailanal.2011.07.012
- Fukuoka, T. and Nomura, M., 2008, "Proposition of Helical Thread Modeling with Accurate Geometry and Finite Element Analysis," Journal of Pressure Vessel Technology, Vol. 130, No. 1, 011204. https://doi.org/10.1115/1.2826433
- Shigley, J. E., Mischke, C. R. and Budynas, R. G., 2003, Mechanical Engineering Design, Mc Graw Hill, New York, pp. 395-461.
- Blake, J. C. and Kurtz, H. J., 1965, "The Uncertainties of Measuring Fastener Preload," Machine Design, Vol. 37, No. 23, pp. 128-133.
- Lim, J. H., Kim, S. W., Kim, K. W., Lee, J. H., Hwang, D. S., Jin, S. M. and Lim, S. Y., 2009, "A Study on the Failure of the Bolted-Joints of Satellite Structures using Three-dimensional Finite Element Analysis," 2009 Korea Society for Aeronautical and Space Science Conference, pp. 827-830.
- Giants, T. W., 2001, Viton B O-ring resilience study (No. TR-99 (1413)-6). Aerospace Corp El Segundo CA Technology Operations.
- Park, S. H., Kim J. H. and Kim, W. H., 2009, "An Evaluation on Sealing Performance of Elastomeric Oring Compressed and Highly Pressurized," Journal of the Korean Society for Precision Engineering, Vol. 26, No. 2, pp. 86-93.
- An, D. and Choi, J. H., 2012, "Efficient Reliability Analysis Based on Bayesian Framework under Input Variable and Metamodel Uncertainties," Structural and Multidisciplinary Optimization, Vol. 46, No. 4, pp. 533-547. https://doi.org/10.1007/s00158-012-0776-6