DOI QR코드

DOI QR Code

Characteristics of Asphalt Concrete Utilizing Coal Ash Based Filler

석탄회 기반 채움재를 활용한 아스팔트 콘크리트의 공학적 특성

  • Received : 2017.08.29
  • Accepted : 2017.09.06
  • Published : 2017.09.30

Abstract

This paper presents a laboratory investigation into the effects of fillers using industrial by-product such as coal ash, IGCC slag on properties of hot-mixed asphalt concrete variation with filler content. For comparison, existing mixture with lime and dust have also been considered. Marshall and flow test has been considered for the purpose of mix design as well as evaluation of mixture. Other performance tests such as indirect tensile strength test, tensile strength ratio(moisture susceptibility), dynamic stability have also been carried out variation with filler content. It is observed that the mixes with industrial by-product exhibit conform with quality standard. Therefore, it has been recommended to utilize industrial by-product based on fly ash wherever available, not only reducing the produce cost but also partly solve the industrial by-product utilization and disposal problem.

본 연구에서는 국내 화력발전소에서 발생되고 있는 산업부산물을 활용하여 아스팔트 콘크리트용 채움재를 개발 및 혼합물에 적용하여 함량에 따른 특성 및 소성변형 저항성에 미치는 영향을 관찰하였다. 실험결과 석탄회 기반 채움재를 사용할 경우 최적아스팔트함량(OAC)는 기존 채움재 대비 0.1% 낮은 값을 나타내었다. 도출된 최적아스팔트함량에서 채움재 함량에 따른 간접인장강도 및 인장강도비 측정 결과 함량 증가에 따라 높은 성능을 발현하였고, 2.0% 이상의 함량에서 국내 단체표준 품질관리 기준 각 0.8 이상과 0.75 이상을 만족하는 결과를 얻을 수 있었다. 동적안정도는 채움재 2.5%의 함량에서 가장 높은 저항성을 나타내었으며, 함량이 2.5%를 넘어설 때 오히려 성능발현이 저하되는 결과를 나타내었다. 과도한 채움재의 혼입은 상대적으로 아스팔트 함량이 감소되기 때문에 취성파괴를 유발할 수 있으므로 최적의 채움재/아스팔트 의 비율을 찾아 적용하는 방안이 필요할 것으로 판단된다.

Keywords

References

  1. Bang, J.W., Kim, Y.Y. (2016). Mechanical properties of an open graded asphalt for semi-rigid pavement, Journal of the Korean Recycled Construction Resources Institute, 4(1), 68-75 [in Korean]. https://doi.org/10.14190/JRCR.2016.4.1.068
  2. Hafeez, I., Kamal, M. (2010). Effects of mineral filler to polymer modified bitumen ratio on the design properties of hot mix asphalt and its performance, Mehran University Research Journal of Engineering & Technology, 29(4), 581-588.
  3. Harris, B.M., Stuart, K.D. (1995). Analysis of mineral fillers and mastics used in stone matrix asphalt, Journal of Association of Asphalt Paving Technologists, 64, 54-95.
  4. Huang, B., Shu, X., Chen, Z. (2007). Effects of mineral fillers on hot-mix asphalt laboratory-measured properties, International Journal of Pavement Engineering, 8(1), 1-9. https://doi.org/10.1080/10298430600819170
  5. Kar, D., Panda, M., Giri, J.P. (2014). Influence of fly-ash as a filler in bituminous mixes, ARPN Journal of Engineering and Applied Sciences, 9(6), 895-900.
  6. Ministry of Land, Infrastructure and Transport. (2015). Guidelines of Asphalt Mixture of Production and Construction [In Korean].
  7. Ministry of Trade, Industry and Energy. (2015). Basic Plan for Electricity Supply and Demand 7th [In Korean].
  8. Mistry, R., Roy, T.K. (2016). Effect of using fly ash as alternative filler in hot mix asphalt, Perspectives in Science, 8, 307-309. https://doi.org/10.1016/j.pisc.2016.04.061
  9. Nathen, A.H. (2013). The effect of filler type and content on hot asphalt concrete mixtures properties, AL-Rafidain Engineering, 21(6), 88-100.
  10. Rahman, M.N., Sobhan, M.A. (2013). Use of non-conventional fillers on asphalt-concrete mixture, International Journal of Innovation and Applied Studies, 3(4), 1101-1109.
  11. SPS-KAI0002-F2349-5687 (2015). Hot Mix Asphalt Mixture [In Korean].
  12. Zulkati, A., Diew, W.Y., Delai, D.S. (2011). Effects of fillers on properties of asphalt-concrete mixture, Journal of Transportation Engineering, ASCE. 138(7), 902-910.