DOI QR코드

DOI QR Code

전차선로 속도향상에 따른 오버랩 구간(Overlap section) 경간 구성 기법

Research on Configuration Optimization of Overlap Section in Overhead Catenary System for High-speed Railway

  • Choi, Tae-su (Dept. of Railway Electrical and Signaling Engineering, Seoul National University of Science & Technology) ;
  • Choi, Kyu-Hyoung (Dept. of Railway Electrical and Signaling Engineering, Seoul National University of Science & Technology)
  • 투고 : 2017.03.20
  • 심사 : 2017.04.17
  • 발행 : 2017.06.01

초록

Overhead catenary system of electric railway has overlap sections which devide and tighten trolley wire supplying electric power to train, where current collection performances may become worse according to railway speed-up. Current collection tests conducted at 400 km/h test-bed section of Honam high-speed railway show that balanced line arrangement at overlap section is needed to secure current collection without arc generation between trolley wire and train current collection device. This paper proposes a design procedure of the overlap section to allow for tension increase and uplift of the trolley wires according to railway speed-up. By applying the proposed procedure to the overhead catenary system of Honam high-speed railway, it is suggested that the minimum span length should be 33.2 m for railway speed-up to 350 km/h and 43.7 m for speed-up to 400 km/h.

키워드

참고문헌

  1. E.K. Youn, K.H. Choi, "A Study on Reliability Analysis of Electric Railway Catenary System using FMECA", Transactions of KIEE, vol. 64, no. 11, pp. 1618 1625, Nov. 2015.
  2. S. H. Chang, K. Lee, S. Y. Kwon, J. W. Park, "Technique of Tension Length Calculation for 350km/h High Speed Catenary System", 2011 Annual Conference of Korean Society for Railway, pp. 932-939, May 2011.
  3. G. Mei, W. Zhang, H. Zhao & L. Zhang, "A Hybrid Method to simulate the Interaction of Pantograph and Catenary on Overlap Span", International Journal of Vehicle Mechanics and Mobility, Volume 44, 2006.
  4. J. P. Massat, J. P. Laine & A. Bobillot, "Pantograph-catenary Dynamics Simulation", Vehicle System Dynamics, Vol. 44, Supplement, 551-559, 2006. https://doi.org/10.1080/00423110600875443
  5. P.C. Antunes, "Development of Multibody Pantograph and Finite Element Catenary Models for Application to High-speed Railway Operations", Thesis of Master Degree, Technico Lisboa, Oct. 2012.
  6. M. Shimizu, Y. Fujii, "Improvement of Structure of Contact Wire on Overlap Sections of Shinkansen", Quarterly Report of RTRI, Vol. 41, No. 4, 2000.
  7. S.Y. Kwon, Y. Cho, Y. Park, K. Lee, "A Prediction of the Geometry Change Especially in Takeoff Point of Overlaps When Increasing Contact Wire Tension in a Existing Catenary", 2011 Annual Conference of Korean Society for Railway, pp.1863-1867, Oct. 2010.
  8. SIEMENS, "Contact Lines for Electric Railways", 2009.
  9. "Facilities and Component Diagrams of New 400km/h High Speed Catenary System (General Drawing of Single Pole-Air Joint-(A00A07))", KRRI, 2014. 07.
  10. Y. Park, K. Lee, "Analysis on Installation Condition According to Dynamic Characteristics for Overhead Catenary System", Transactions of KIEE, vol. 65, no. 9, pp. 1605 1609, 2016.