References
- S. D. Bulent Vural, Mehmet Uzunoglu, Enes Ugur, Bilal Akin, "Fuel Consumption Comparison of Different Battery/Ultracapacitor Hybridization Topologies for Fuel-Cell Vehicles on a Test Bench," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 2, pp. 552-561, 2014. https://doi.org/10.1109/JESTPE.2013.2297702
- C. Siang FuiTie, "A review of energy sources and energy management system in electric vehicles," Renewable and Sustainable Energy Reviews, vol. 20, pp. 82-92, 2013. https://doi.org/10.1016/j.rser.2012.11.077
- W. C. Qi Li, Yankun Li, Shukui Liu, Jin Huang, "Energy management strategy for fuel cell/battery/ ultracapacitor hybrid vehicle based on fuzzy logic," Electrical Power and Energy Systems, vol. 43, 2012.
- I. Lachhab and L. Krichen, "An improved energy management strategy for FC/UC hybrid electric vehicles propelled by motor-wheels," International Journal of Hydrogen Energy, vol. 39, pp. 571-581, 2014. https://doi.org/10.1016/j.ijhydene.2013.10.064
- C. Zhao, H. Yin, Z. Yang, and C. Ma, "Equivalent Series Resistance-Based Energy Loss Analysis of a Battery Semiactive Hybrid Energy Storage System," IEEE Transactions on Energy Conversion, vol. 30, pp. 1-11, 2015. https://doi.org/10.1109/TEC.2014.2326301
- C. Wang and M. H. Nehrir, "Power Management of a Stand-Alone Wind/Photovoltaic/Fuel Cell Energy System," IEEE Transactions on Energy Conversion, vol. 23, pp. 957-967, 2008. https://doi.org/10.1109/TEC.2007.914200
- G. R. Zhu, K. H. Loo, Y. M. Lai, and C. K. Tse, "Quasi-Maximum Efficiency Point Tracking for Direct Methanol Fuel Cell in DMFC/Supercapacitor Hybrid Energy System," IEEE Transactions on Energy Conversion, vol. 27, pp. 561-571, 2012. https://doi.org/10.1109/TEC.2012.2195183
- J. Biela, U. Badstuebner, and J. W. Kolar, "Design of a 5-kW, 1-U, 10-kW/dm3 resonant DC-DC converter for telecom applications," IEEE Transactions on Power Electronics, vol. 24, pp. 1701-1710, 2009. https://doi.org/10.1109/TPEL.2009.2014377
- M. Mirjafari and R. S. Balog, "Multi-objective design optimization of renewable energy system inverters using a Descriptive language for the components," in 26th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2011, March 6, 2011-March 10, 2011, Fort Worth, TX, United states, 2011, pp. 1838-1845.
- J. W. Kolar, J. Biela, and J. Minibock, "Exploring the Pareto front of multi-objective single-phase PFC rectifier design optimization-99.2% Efficiency vs. 7kW/dm3 power density," in 2009 IEEE 6th International Power Electronics and Motion Control Conference, IPEMC '09, May 17, 2009-May 20, 2009, Wuhan, China, 2009, pp. 1-21.
- S. Zeljkovic, T. Reiter, and D. Gerling, "Efficiency Optimized Single-Stage Reconfigurable DC/DC Converter for Hybrid and Electric Vehicles," Ieee Journal of Emerging and Selected Topics in Power Electronics, vol. 2, pp. 496-506, Sep 2014. https://doi.org/10.1109/JESTPE.2014.2305739
- M. Mirjafari, R. S. Balog, and R. Turan, "Multiobjective optimization of the DC-DC stage of a module-integrated inverter based on an efficiency usage model," IEEE Journal of Photovoltaics, vol. 4, pp. 906-914, 2014. https://doi.org/10.1109/JPHOTOV.2014.2304363
- S. Waffler, M. Preindl, and J. W. Kolar, "Multiobjective optimization and comparative evaluation of Si soft-switched and SiC hard-switched automotive DC-DC converters," in 35th Annual Conference of the IEEE Industrial Electronics Society, IECON 2009, November 3, 2009-November 5, 2009, Porto, Portugal, 2009, pp. 3814-3821.
- D. Han, J. Noppakunkajorn, and B. Sarlioglu, "Comprehensive Efficiency, Weight, and Volume Comparison of SiC-and Si-Based Bidirectional DCDC Converters for Hybrid Electric Vehicles," IEEE Transactions on Vehicular Technology, vol. 63, pp. 3001-3010, 2014. https://doi.org/10.1109/TVT.2014.2323193
- G. Adinolfi, G. Graditi, P. Siano, and A. Piccolo, "Multiobjective Optimal Design of Photovoltaic Synchronous Boost Converters Assessing Efficiency, Reliability, and Cost Savings," IEEE Transactions on Industrial Informatics, vol. 11, pp. 1-1, 2015. https://doi.org/10.1109/TII.2015.2475695
- M. Taherbaneh, A. H. Rezaie, H. Ghafoorifard, M. Mirsamadi, and M. B. Menhaj, "A Trade-Off between the Efficiency, Ripple and Volume of a DC-DC Converter," Journal of Power Electronics, vol. 11, pp. 621-631, 2011. https://doi.org/10.6113/JPE.2011.11.5.621
- Y. Louvrier, P. Barrade, and A. Rufer, "Weight and efficiency optimization strategy of an interleaved DC-DC converter for a solar aircraft," in European Conference on Power Electronics and Applications, 2009, pp. 1-10.
- C. Gammeter, F. Krismer, and J. W. Kolar, "Weight Optimization of a Cooling System Composed of Fan and Extruded-Fin Heat Sink," IEEE Transactions on Industry Applications, vol. 51, pp. 2193-2200, 2013.
- J. Fu, Z. Zhang, Y.-F. Liu, and P. C. Sen, "MOSFET switching loss model and optimal design of a current source driver considering the current diversion problem," 2012, pp. 998-1012.
- M. C. Mira, A. Knott, and M. A. E. Andersen, "MOSFET loss evaluation for a low-power Stand-Alone photovoltaic-LED system," in 11th IEEE International Conference on Power Electronics and Drive Systems, PEDS 2015, June 9, 2015-June 12, 2015, Sydney, NSW, Australia, 2015, pp. 779-785.
- S. Maniktala, Switching Power Supplies A-Z (Second Edition), 2 ed. Oxford: Newnes, 2012.
- J. Hu, J. Li, J. Zou, and J. Tan, "Losses calculation of IGBT module and heat dissipation system design of inverters," Diangong Jishu Xuebao/Transactions of China Electrotechnical Society, vol. 24, pp. 159-163, 2009.
- Z.-Y. Zhang, G.-Q. Xu, and X.-L. Shen, "Analyzing and designing of dissipation system of inverter," Tongji Daxue Xuebao/Journal of Tongji University, vol. 32, pp. 775-778, 2004.