DOI QR코드

DOI QR Code

High Speed Segmental Stator Type 4/3 SRM: Design, Analysis, and Experimental Verification

  • Hieu, Pham Trung (Dept. of Mechatronics Engineering, Kyungsung University) ;
  • Lee, Dong-Hee (Dept. of Mechatronics Engineering, Kyungsung University) ;
  • Ahn, Jin-Woo (Dept. of Mechatronics Engineering, Kyungsung University)
  • 투고 : 2016.06.29
  • 심사 : 2017.05.19
  • 발행 : 2017.09.01

초록

This paper presents a design of a 2-phase segmental stator type 4/3 switched reluctance motor (SRM) for air-blower application. The air-blower requires only one direction rotation, high rotor speed without torque dead-zone. In order to satisfy the requirements of the load, the rotor of the 4/3 proposed SRM is designed with wider rotor pole arc and non-uniform air-gap is applied on the rotor shape. With a special rotor structure, the motor generates a wider positive torque region and has no torque dead-zone. The stator of the proposed SRM is constructed with two segmental C-cores, and there are no magnetic connections between 2 C-cores. The flux follows in a short closed loop in each C-core and has no reversal flux in the stator. The static and dynamic characteristics of the proposed motor are analyzed by the finite element method (FEA) and Matlab-Simulink, respectively. In order to verify the design, a prototype of the proposed motor has manufactured for laboratory test. The performance of the proposed motor is verified by the simulation and experimental results.

키워드

참고문헌

  1. J. Dang, J. Rhett Mayor, S. A. Semidey, R. G. Harley, T. G. Habetler, and J. A. Restrepo, "Practical Considerations for the Design and Construction of a High-Speed SRM With a Flux-Bridge Rotor," Industry Applications, IEEE Transactions on, vol. 51, pp. 4515-4520, 2015. https://doi.org/10.1109/TIA.2015.2445813
  2. Z. Haijun, X. Weijie, W. Shuhong, H. Youpeng, W. Guolin, and Z. Jianguo, "Optimum Design of Rotor for High-Speed Switched Reluctance Motor Using Level Set Method," Magnetics, IEEE Transactions on, vol. 50, pp. 765-768, 2014. https://doi.org/10.1109/TMAG.2013.2285393
  3. D. Wen, L. Ling, and L. Jianyong, "Design and control of a high-speed switched reluctance machine with conical magnetic bearings for aircraft application," Electric Power Applications, IET, vol. 7, pp. 179-190, 2013. https://doi.org/10.1049/iet-epa.2012.0319
  4. L. Dong-Hee, P. Trung Hieu, and A. Jin-Woo, "Design and Operation Characteristics of Four-Two Pole High-Speed SRM for Torque Ripple Reduction," Industrial Electronics, IEEE Transactions on, vol. 60, pp. 3637-3643, 2013. https://doi.org/10.1109/TIE.2012.2208432
  5. K. Lu, P. O. Rasmussen, S. J. Watkins, and F. Blaabjerg, "A New Low-Cost Hybrid Switched Reluctance Motor for Adjustable-Speed Pump Applications," IEEE Transactions on Industry Applications, vol. 47, pp. 314-321, 2011. https://doi.org/10.1109/TIA.2010.2091189
  6. L. Kaiyuan, U. Jakobsen, and P. O. Rasmussen, "Single-Phase Hybrid Switched Reluctance Motor for Low-Power Low-Cost Applications," IEEE Transactions on Magnetics, vol. 47, pp. 3288-3291, 2011. https://doi.org/10.1109/TMAG.2011.2157466