• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.115-121
• /
• 2014

The intrinsic simplicity, ruggedness, and simple power electronic drive requirement of a Switched Reluctance Motor(SRM) make it possible to use in many commercial adjustable speed application. The simple magnetic circuit results in a high efficiency drive and low temperature rise, and the drive system provides a good drive characteristics. This paper is provides two phase 4/3 SRM that is similar to two phase 6/3 SRM as aspect to magnetic structure. Although 6/3 SRM does not experience any flux reversal as the flux is in the same direction whether phase A or B is excited, but two phase 4/3 SRM experiences a flux reversal in small part of stator yoke. The flux reversal in two phase 4/3 SRM could be relieved by an adjustment of stator yoke structure. The magnetic analysis and design considerations of the two phase 4/3 SRM have been obtained by the finite element method analysis (FEM).

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.303-309
• /
• 2009

Switched Reluctance Motor(SRM) has become popular for industrial application, particularly for low medium drives due to the advantages of SRM over the other ac motors: SRM can be manufactured with low cost because it has a simple structure. But, asymmetric bridge converter that generally is used for driving requires two discrete switching devices and freewheeling diodes per phase, and cause the SRM drives to be complicated and to increase the cost of overall system. Therefore, this paper suggests a new type of 4-switch converter for SRM. 4-switch converter topology is studied to provide a possibility for the realization of low cost 3-phase SRM drive system. For effective utilization of the developed system, a new current control algorithm is designed and implemented to produce the desired dynamic performance. With the developed power conversion circuit and control scheme, it is expected that the proposed system can be widely used in commercial applications with reduced system cost.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.201-202
• /
• 2017

스위치드 릴럭턴스 전동기(Switched Reluctance Motor, 이하 SRM)은 간단한 구조와 기계적 강인성, 넓은 속도 범위를 사용할 수 있다는 장점이 있다. 하지만, SRM을 산업분야에 적용하기 위해서는 각각의 설계 변수에 따른 성능 변화에 대한 연구가 부족한 실정이며, 기기의 소형화에 대한 연구가 진행되어지고 있다. 본 논문에서는 2상 4/2극 SRM과 3상 6/4 SRM을 설계 하며, 2상 4/2극 SRM의 경우 스테퍼 회전자의 극호각과 스테퍼의 높이를 변수로 지정하여 성능을 확인하며, 3상 6/4극 SRM의 경우 2상 4/2 SRM 전동기 대비 기기의 소형화를 중점으로 설계 및 특성 해석을 수행하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.92-97
• /
• 2014

The SRM is a doubly salient, singly excited machine. The torque is developed by the tendency for the magnetic circuit to adopt a configuration of minimum reluctance, i.e. for the rotor to move into in line with the stator poles and to maximize the inductance of the coils excited. It is common practice to combine them into groups of poles which are excited simultaneously; for example, 8/6 SRM (8 stator poles and 6 rotor poles) for 4 phases, 6/4, 12/8 SRM for 3 phases, 4/2, 6/3 SRM for 2 phases. Small number of phases in two-phase SRMs allows more cost savings with regards to the switching devices in the converter. The stator back irons of two phase 6/3 SRM and C-core 4/3 SRM does not experience any flux reversal as the flux is in the same direction whether phase A or B is excited. In this study, the similarities, the differences, and structural characteristics between the two SRMs was studied, The magnetic analysis also has been carried out by the finite element method analysis (FEM).

• Journal of the KSME
• /
• v.17 no.1
• /
• pp.8-17
• /
• 1977

이 글에서는 1.표준기준물의 정의와 용도 2. SRM의 제조와 검정 3. SRM의 미래요구 4. SRM에 관한 국제협력 등에 관하여 알아보았다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.4
• /
• pp.224-228
• /
• 2004

The switched reluctance motor(SRM) drive system provides a good adjustable speed and torque characteristics. SRM has the possibility of maintaining full power over a wide speed range. So, many attempts are being done from home appliances to industrial machinery and tools. Especially, the traction drive of SRM is one of a good application due to it's torque characteristics. However, because of the switching mechanism, it has some disadvantage of noise and vibration. It is difficult to adopt to an appliance demanding silence. A noise simulations and test of 3-phase 6/4, 6/8 and 12/8 SRM were done in other to compare each other. The test results show that 12/8 SRM has good noise characteristics.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.533-534
• /
• 2011

본 논문은 고속블로워 시스템용 2상 4/2 SRM(Switched Reluctance Motor)과 3상 6/2 SRM의 토크 리플 최소화를 위한 가변 공극형 회전자 타입을 제안하고 그에 대한 특성 해석을 수행하였다. 연속적인 토크를 얻기 위하여 정 토크 구간을 확장할 수 있는 형상을 적용하고 고속에서의 리플을 최적화 할 수 있는 가벼 공극형 구조를 제안하였다. 기존에 제안되어진 2상 고속 4/2 SRM의 특성과 제안된 3상 고속 6/2 SRM의 특성을 FEM(Finite Elements Method) 해석을 통하여 비교해봄으로 고속에서의 개선된 토크 리플을 검증하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.307-312
• /
• 2006

This paper proposes the SRM drive system, which accurately estimates the phase currents from the DC-link current to drive SRM instead of detecting the three-phase currents. In addition, the detecting circuit of DC-link current is also proposed to increase the resolution and decrease the off-set influence. Comparing with the general drive system based on the phase current, it is verified through the experiments that the proposed SRM drive system based on the DC-link current has the good performance in steady-state response of the speed control. Using the DC-link current, all of the 3-phase currents can be easily estimated for driving the SRM.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1864-1871
• /
• 2017

This paper presents a design of a 2-phase segmental stator type 4/3 switched reluctance motor (SRM) for air-blower application. The air-blower requires only one direction rotation, high rotor speed without torque dead-zone. In order to satisfy the requirements of the load, the rotor of the 4/3 proposed SRM is designed with wider rotor pole arc and non-uniform air-gap is applied on the rotor shape. With a special rotor structure, the motor generates a wider positive torque region and has no torque dead-zone. The stator of the proposed SRM is constructed with two segmental C-cores, and there are no magnetic connections between 2 C-cores. The flux follows in a short closed loop in each C-core and has no reversal flux in the stator. The static and dynamic characteristics of the proposed motor are analyzed by the finite element method (FEA) and Matlab-Simulink, respectively. In order to verify the design, a prototype of the proposed motor has manufactured for laboratory test. The performance of the proposed motor is verified by the simulation and experimental results.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.4
• /
• pp.813-823
• /
• 2019

Supplier Relationship Management (SRM) is a strategic partnership activity for an enterprise and is expected to be a significant performance element in the current enterprise environment where uncertainty is growing. Despite the effective SRM allows companies to manage quality and inventory throughout their logistics procurement process with their suppliers and increase the profitability of the company, there is a scarce of theory about supplier relationship management (SRM) and many companies are not aware of the importance of SRM and depend only on simple electronic purchasing methods. Therefore, I analyze the H Company as a case company, which is a large domestic company and has reached 2,500 domestic and overseas suppliers. SRM process and its effects are evaluated as (1) Purchasing strategy division 2) Process division (3) IT infrastructure division. By analyzing SRM as one of the management strategies that bring the overall value of enterprise performance up, and by looking at how domestic large corporations manage their suppliers, I hope that manufacturers with many suppliers will recognize the importance of SRM and build an SRM tailored to their business.