DOI QR코드

DOI QR Code

버블의 크기별 입도분포와 부상시간과의 상관특성에 관한 연구

A Study on the Relation Characteristics between Bubble Size Distribution and Floating Time

  • 전건 (서울시립대학교 환경공학과) ;
  • 박철휘 (서울시립대학교 환경공학과)
  • Jeon, Gun (Department of Environmental Engineering, University of Seoul) ;
  • Park, Chul-Hwi (Department of Environmental Engineering, University of Seoul)
  • 투고 : 2017.02.13
  • 심사 : 2017.04.11
  • 발행 : 2017.05.31

초록

최근 강우는 짧은 시간에 많은 비가 오는 특성을 자주 나타낸다. 이런 기상현상 때문에, 초기유출수와 합류식하수관거 월류수의 유입유량과 농도도 변화되고 있다. 이와 같이 유입조건이 변동되는 경우에는, 높은 수면적부하율을 가지는 부상방법이 공공수역의 수질관리에 적합하다. 왜냐하면 부상법은 공공수계의 요구조건을 충족 할 수 있기 때문이다. 현재까지 이러한 부상법의 검증과 진단을 위하여, 공급공기량과 유입SS량의 비율을 반영하여 왔다. 그러나 불행하게도 이러한 방식은 기술진단과 검증을 위한 판단기준으로는 그 한계를 가진다. 왜냐하면 부상속도와 시간요소가 상이한 버블분포에 의해 달라지기 때문이다. 부상속도와 시간은 처리시설의 용량에 영향을 준다. 왜냐하면 시간인자가 시설의 규모를 결정하기 때문이다. 그러므로, 동일한 공급공기량과 유입SS농도간 비율조건에서의 버블분포특성과 부상시간특성을 운영 및 기술진단 및 평가를 위한 판단기준으로 적용하여야만 한다. 따라서 이러한 필요에 따라, 이 논문 내용은 버블분포와 부상시간간 관계의 분석에 대한 실증적 일반화에 관한 연구이다.

Lately rainfall characteristics that it rains a lot in a short space of time often occurs. Because of this meteorological phenomena, the flow rate and concentration of initial rainfall for runoff and combined sewer overflows are changed. In the case of this inlet fluctuation, the flotation method at high surface loading rate is suitable for water quality management. the flotation method is able to meet the removal rate requirements of water public zone in 5 to 10 min which is irelatively short period. For assessment and diagonision of flotation method, A/S ratio is applied until now. But unfortunately, this has some limits for evaluation standard for certification and assessment of technical diagnosis and operation. This is why there is different efficiency in the bubble distribution at the same A/S ratio. The velocity and time of floating is changed by the different bubble distributions. The floating time affects the plant volume because the time factor make size dicision. Therefore the charateristics of bubble distribution and floating time at the same A/S ratio is necessary to apply to evaluation standard for certification and assessment of technical diagnosis and operation. For generalization of the method in certification and assessment, the characteristics of bubble distribution was studied. Until recently, using the optical device and shooting live video, there are some analysis technology of the floating factors. But this kind of technology is influenced by the equipment. with this level of confidence about the results, it is difficult to apply to generalize. According this reasons, this study should be applied on experiment generalization of method about measurement of relation between bubble distribution and floating time.

키워드

참고문헌

  1. Rubio, J., "Overview of flotation as a wastewater treatment technique," Miner. Eng., 15, 139-155(2002). https://doi.org/10.1016/S0892-6875(01)00216-3
  2. Lee, H. Y., "Hydrodynamic collition efficiency and flotation characteristics of inorganic particles in daf process," J. Korean Soc. Water and Wastewater, 16(6), 655-662(2002).
  3. Lee, K. Y., "Study on the determination of optimum size of storage tank and intercepting capacity for csos reduction in urban area," J. Korean Soc. Water and Wastewater, 26(6), 735-745(2012). https://doi.org/10.11001/jksww.2012.26.6.735
  4. Feris, L. A., Gallina, C. W., Rodrigues, R. T. and Rubio, J., "Optimizing dissolved air flotation design and saturation," Water Sci. and Technol., 43(8), 145-157(2002).
  5. Ponasse, M., "Bubble formation by water release in nozzle$\eth$ii. Influence of various parameters on bubble size," Water Res., 32(8), 2498-2506(1998). https://doi.org/10.1016/S0043-1354(97)00436-3
  6. Lau, Y. M., Sujatha, K., Thiruvalluvan, G. M., Deen, N. G. and Kuipers, J. A. M., "Experimental study of the bubble size distribution in a pseudo-2d bubble column," Chem. Eng. Sci., 98, 203-211(2013). https://doi.org/10.1016/j.ces.2013.05.024
  7. Mehrshad, N. and Massinaei, M., "New image-processing algorithm for measurement of bubble size distribution from flotation froth images," Minerals & metallurgical processing aug, p.146(2011).
  8. Okumura K., Harris R. and Sano M., "Bubble formation from nonwetted slot nozzles," Canadian Metal. Quart, 37(1), 49-56(1998). https://doi.org/10.1179/S0008443398000056