DOI QR코드

DOI QR Code

Time Series Analysis of Crystalline Silicon Photovoltaic Module Certification Results

결정질 실리콘 태양광발전모듈 인증 실적의 시계열 분석

  • Han, Yun-Cheol (Department of New & Renewable Energy Engineering, Graduate School, Dongguk University-Seoul) ;
  • Kim, Ik-Pyo (Department of New & Renewable Energy Engineering, Graduate School, Dongguk University-Seoul) ;
  • Kang, Kyu-Young (Department of New & Renewable Energy Engineering, Graduate School, Dongguk University-Seoul)
  • 한윤철 (동국대학교 대학원 신재생에너지공학과) ;
  • 김익표 (동국대학교 대학원 신재생에너지공학과) ;
  • 강규영 (동국대학교 대학원 신재생에너지공학과)
  • Received : 2017.04.19
  • Accepted : 2017.06.21
  • Published : 2017.06.30

Abstract

Crystalline silicon photovoltaic module certification began in 2007. "Renewable Energy Equipment Certification Scheme" was implemented until July 28, 2015. Then, the scheme was changed to "KS Certification Scheme" since July 29, 2015. A total of 2,331 models have been certified by 2016. The proportion of multi crystalline modules in certified products is higher than that of mono crystalline modules, and Korean modules account for 78% of the total certification modules. Chinese solar cells account for the highest percentage of 40% of the total modules and 62.4% of modules certified in 2016 use Chinese solar cells. With the development of technology, module power is continuously increasing, and efficiency is also rising. The average efficiency of mono crystalline module is 0.74% higher than the average of multi crystalline module. As a result of comparing domestic module with Chinese module, the highest efficiency of mono crystalline module and multi crystalline module and the average efficiency of mono crystalline module are higher than those of Chinese module, but the average efficiency of multi crystalline module is similar to that of Chinese module.

Keywords

References

  1. REN21, Renewables 2016 Global Status Report, pp. 32-33, 2016.
  2. Korea Energy Agency, New & Renewable Energy Supply Statistics 2015, 2016.
  3. Korea Energy Agency, Industry Statistics of New & Renewable Energy 2015, 2016.
  4. MOCIE, New & Renewable Energy White Paper 2005, 2006.
  5. KATS, Introduction of KS certification system to foster global national certification mark, 2014.
  6. Lee, J. I., Chung, J. E., Moon, H. C., and Lim, S. B., The influence of KS certification system on export performance of small and medium-sized enterprises, International Commerce and Information Review, Vol. 18, No. 4, pp. 311-332, 2016.
  7. Korea Energy Agency, New & Renewable Energy KS Certification Regulations, 2015.
  8. KATS, KS C 8561:2015 Crystalline silicone photovoltaic (PV) module (performance), 2015.
  9. IEC, IEC61215:2005 Crystalline silicon terrestrial photovoltaic (PV) modules -Design qualification and type approval, 2005.
  10. Kim, K. S., Kang, K. H., and Yu, G. J., Certificate test on crystalline silicon photovoltaic module, The Korean Solar Energy Society, Vol. 29, No. 1, pp. 27-30, 2009.
  11. Baik, S. S., Baek, S. Y., Jung, T. W., and Cho, J. H., A study on validity of anti-PID technology of solar cell for the high reliability of photovoltaics system, Society of Korea Industrial and Syatems Engineering, Vol. 36, No. 2, pp. 32-38, 2013. https://doi.org/10.11627/jkise.2013.36.2.32
  12. Lee, E. S., Jung, T. H., Go, S. H., Ju, Y. C., Chang, H. S., and Kang, G. H., PID recovery characteristics of photovoltaic modules in various environmental conditions, The Korean Solar Energy Society, Vol. 35, No. 5, pp. 57-65, 2015.
  13. Yi, J. S. and Kim, K. H., Introduction to solar cell production, Dooyangsa, 2008.