초록
무한 도체 평판에 위치한 파장에 비하여 작은 개구의 투과 효율을 향상시키는 방법으로써, 기존에 제안된 H-형태의 공진 개구를 변형하여 공진 주파수를 낮추어 파장 대비 개구의 크기를 소형화하고, 공진 개구의 투과 효율을 향상시켰다. 공진 개구를 등가 회로로 표현하여 계산된 최대 투과 단면적은 시뮬레이션을 통해 계산된 변형된 소형 공진 개구에서의 최대 투과 단면적과 일치함을 보이고, 최대 투과 단면적이 $2D{\lambda}/4{\pi}$의 정량적 수식으로 표현되어 투과 효율을 비교할 수 있다. 본 논문에서 제안한 변형된 공진 개구는 H-형태의 개구와 비교하여 최대 투과 단면적은 $846mm^2$에서 $2,431mm^2$으로 약 2.87배 증가되었으며, 공진 주파수는 5.06 GHz에서 2.92 GHz로 낮아져 개구의 길이 대 파장 비는 0.178에서 0.103으로 소형화되었다.
As a method of the transmission efficiency improvement of an aperture smaller than the wavelength, we modified the conventional H-shaped resonant aperture to lower the resonance frequency of resonant aperture, and the transmission efficiency of resonant aperture was improved more than the conventional aperture. The maximum transmission cross section(TCS) calculated using the equivalent circuit tends to be almost equal to the maximum TCS from the small resonant aperture modified to improve the transmission efficiency. The transmission characteristics of resonant apertures can be quantified as the TCS, and the transmission efficiency of that can be compared. The modified resonant aperture has a maximum TCS increased by about 2.87 times from $846mm^2$ to $2,431mm^2$ compared to the H-shaped aperture, and the resonant frequency decreased from 5.06 GHz to 2.92 GHz, and the length-to-wavelength ratio of the aperture was reduced from 0.178 to 0.103.