• 한국항해항만학회지
• /
• 제32권5호
• /
• pp.363-368
• /
• 2008

본 논문은 910 MHz 대역에서 동작하는 RFID (radio Frequency identification) 태그 안테나의 소형화 설계 기법을 제안한다. folded-dipole 구조와 미앤더 선로 구조를 적용하여 태그 안테나의 소형화 설계를 행하였다. 최대 전력 전달을 위해서 테그 안테나와 칩의 임피던스의 허수부는 공액 정합되었다. 최적화된 안테나의 크기는 $50\;nm\;{\times}\;40\;nm\;{\times}\;1.6\;nm$로, 참고문헌 [4]와 비교하여 크기가 62 % 줄었다. 제작된 태그 안테나의 측정결과들은 예상과 잘 일치하는 것으로 확인되었다. 칩이 내장된 태그 안테나의 인식거리는 약 5 m로 관측되었다.

• 한국전자파학회논문지
• /
• 제15권9호
• /
• pp.888-895
• /
• 2004

본 논문은 집중 소자 캐패시터와 접지를 사용하여 평행 결합 선로 필터의 새로운 소형화 기법을 제안하였다. 본 논문에서 제안한 기법은 설계와 제작이 간단하여 RF(Radio Frequency) 필터로 많이 사용되고 있는 평형 결합선로 필터를 소수의 캐패시터와 접지만을 이용하여 필터의 크기를 임의의 길이로 줄일 수 있는 기법이다. 본 논문은 기존의 단일 전송 선로와 평행 결합 선로의 소형화 기법을 평행 결합 선로 필터에 적용하였으며, 접지를 이용해 소형화에 사용될 캐패시터의 개수를 줄이는 기법을 제안한다. 본 논문에서 제안한 기법은 필터의 소형화와 더불어 집중소자 캐패시터를 사용함으로 인해 필터의 고조파 특성이 개선되며 이로 인해 고주파 영역의 차단 특성이 개선되는 장점이 있다. 제안된 소형화 기법에 대한 검증을 위해 Duroid($\varepsilon$$_{r}$=10)기판을 사용하여 셀룰러폰 대역인 900 MHz 대역의 FBW(Fractional Band Width) 10 %의 필터를, 제안한 기법을 적용하여 공진기의 길이를 λ/4로 줄인 헤어핀 형태로 제작 및 측정하여 제안된 기법의 타당성을 확인하였다..

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1999년도 추계공동학술대회 논문집:21세기지식경영과 정보기술
• /
• pp.693-700
• /
• 1999

The Servo motor is consistent with the magnet rotor, winding, magnetic back iron and the sensor. Especially the soft magnetic back iron in the servo motor, which consists of the magnet rotor and winding, and between these two components lies the magnetic circle. Its important to monitor the output power of to make conclusive decision for designs. In these days main household electrical appliances, business machinery and tools are made by process of miniaturization. Because of this miniaturization in hardware, miniaturization of the servo motor is essential But the decrease inside affects the power output. For improve of these has been several attempt at improving the power output of these smaller servo motors. There has been experiment in the servo motor composition, composing of the improvement of the soft magnetic back iron through comparison of the out put power plans are being made.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.201-206
• /
• 2011

This paper presents a miniaturized epsilon negative (ENG) zeroth-order resonance (ZOR) patch antenna with an improved bandwidth. The miniaturization and the broad bandwidth of the ENG ZOR patch antenna are achieved by using a meandered via and a high permeability substrate instead of a straight via and a dielectric substrate. The use of a meandered via allows miniaturization of the ENG ZOR patch antenna without narrowing the bandwidth. The use of a high permeability substrate allows further miniaturization of the ENG ZOR patch antenna and improvement of the bandwidth. A high permeability substrate consisting of a multi-layered substrate is designed to have a small material loss. The antenna (kr=0.32) has a 10 dB fractional bandwidth of ~1 %, which is 1.74 times as broad as that of an antenna with a dielectric substrate.

• International Journal of Aerospace System Engineering
• /
• 제3권2호
• /
• pp.14-21
• /
• 2016

This paper presents research on predicting the possible intercept time for a Nodong missile based on its flight trajectory. North Korea possesses ballistic missiles of various ranges, and nuclear warhead miniaturization tests and ballistic missile launch tests conducted last year and in previous years have made these missiles into a serious security threat for the international community. With North Korea's current miniaturization skills, the range of the nuclear capable Nodong missiles can be adjusted according to their use goals and operating environment by using a variety of adjustment methods such as payload, fuel mass, Isp, loft angle, cut-off, etc., and therefore precise flight trajectory prediction is difficult. In this regards, this research performs model simulations of the flight trajectory of North Korea's domestically developed Nodong missiles and uses these as a basis for predicting the possible intercept times for major ballistic missile defense systems such as PAC-3, THAAD, and SM-3.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권4호
• /
• pp.213-220
• /
• 2003

Polymerase chain reaction (PCR) is one of the most widely used analytical tool and is an important module that would benefit from being miniaturized and integrated onto diagnostic or analytical chips. There are potentially two different approaches for the miniaturization of the PCR module: chamber-type and flow-type micro-PCR. These miniaturized PCRs have distinct characteristics and advantages. In this article, we review the necessity of micro-PCR, the materials for the chip fabrication, the surface modification, and characteristics of the two types of micro-PCR. The motivation underlying the development of micro-PCR, the advantages and disadvantages of the various materials used in fabrication and the surface modification methods will be discussed. And finally, the precise features of the two different types of micro-PCR will be compared.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.372-373
• /
• 2006

Modern business trends call for miniaturization of electronic systems. One of the major impedances in this miniaturization is the conductive and inductive components in chips and circuit boards. Direct Write Technology can write these soft magnetic materials, thus allowing for further miniaturization of inductor devices. Another obstacle in electronics fabrication is the size limitations of thick screen-printing and the material limitations in ink jet printing. Direct Write Technologies address both of these limitations by providing feature sizes less than 20 microns with a wide range of materials possibilities. A discussion of the application of these nano-particulate materials by Direct Write Technologies will be presented.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.919-926
• /
• 2021

In this paper, a study was conducted on the miniaturization of an e-Mobility battery charger module using GaN-FET. GaN-FET is one of the types of WBG devices, and it is a device that exceeds the performance of existing Si power semiconductors. In particular, GaN-FET has the advantage of small packaging size and high switching frequency operation, which is advantageous for miniaturization of power converters. Therefore, a bidirectional DC/DC converter module for e-mobility charging using GaN-FET was developed. To apply to the converter to be developed, analysis is performed on the characteristics of GaN-FET, and after manufacturing a prototype of a bidirectional DC/DC converter module, the efficiency and temperature data of the power converter are analyzed to verify its feasibility.

• International journal of advanced smart convergence
• /
• 제13권2호
• /
• pp.1-6
• /
• 2024

Reconfiguration and miniaturization of antennas have become key attributes in modern wireless communication systems. Reconfiguration of radiation pattern can alleviate the problems encountered in modern wireless communication systems such as multi-path problems. Physical limitation of miniaturization also can be overcome by using a zeroth-order resonance (ZOR) antenna based on metamaterial. In order to achieve reconfiguration and miniaturization of antennas at the same time, we propose a new pattern reconfigurable zeroth-order resonance (ZOR) antenna that reconfigures the radiation patterns by varying the position and the number of unit cells comprising the antenna. The antenna is fabricated in an equilateral triangular shaped symmetrical structure to increase pattern variety. This structure can easily provide eight different radiation patterns (two omnidirectional and six monopole like patterns).

• 한국전자파학회논문지
• /
• 제25권7호
• /
• pp.709-720
• /
• 2014

본 논문에서는 VHF 및 UHF 대역에서 사용되는 LPDA(Log-Periodic Dipole Array) 안테나를 소형화 하는 연구를 하였다. LPDA 안테나를 소형화하기 위해, 본 연구에서는 LPDA 안테나의 저주파 대역 방사 소자를 급전 부분의 전류 상쇄 효과가 적은 삼각형 미앤더 구조로 변형시켰다. 삼각형 미앤더 구조는 이등변 삼각형 미앤더 구조와 직각 삼각형 미앤더 구조를 제안하였으며, 두 가지 미앤더 구조를 적용하여 LPDA 안테나를 소형화 하였다. 또한, 소형화된 LPDA 안테나에 대해서 시뮬레이션과 측정 결과를 비교하였다. 그 결과, 이등변 삼각형 미앤더 구조 적용 LPDA 안테나와 직각삼각형 미앤더 구조 적용 LPDA 안테나는 기본형 LPDA 안테나에 비해서 각각 60.5 %, 72.4 %로 소형화되었다. 따라서 제안된 삼각형 미앤더 구조가 LPDA 안테나의 소형화에 적합함을 확인할 수 있었다.