DOI QR코드

DOI QR Code

Characteristics of ZrO2 Felt Supported Cu/Zn Catalyst for Methanol Steam Reforming

메탄올 수증기개질을 위한 ZrO2 펠트 기반 Cu/Zn 촉매 특성 연구

  • CHOI, EUNYEONG (The 4th R&D Institute, Agency for Defense Development)
  • 최은영 (국방과학연구소 제4기술연구본부 4부)
  • Received : 2017.03.31
  • Accepted : 2017.04.30
  • Published : 2017.04.30

Abstract

Characteristics of $ZrO_2$ felt supported Cu/Zn catalysts have been investigated for the production of hydrogen via methanol steam reforming. Cu and Zn in different weight percent were loaded using wet impregnation over $ZrO_2$ felt support. The catalysts were characterized with BET and FE-SEM. The performance of these synthesized catalysts were investigated at SCR=1.5, $GHSV=2000h^{-1}$, temperature=$300{\sim}400^{\circ}C$, and pressure=2.5~19.5 barA. The results showed that the $Cu^{32.5}Zn^{7.5}ZrO_2$ catalyst was most active in terms of methanol conversion and hydrogen production. The methanol conversion in steam reforming of methanol was 84.6% at 19.5 barA and furnace $400^{\circ}C$ over $Cu^{32.5}Zn^{7.5}ZrO_2$ catalyst. The catalysts prepared using $ZrO_2$ felt show higher reactor temperature than the pellet type catalyst at same furnace temperature.

Keywords

References

  1. R. O'Hayre, S.W. Cha, W. Colella, and F. Prinz, "Fuel cell fundamentals", John Wiley & Sons, Inc., USA, 2008.
  2. A. Psoma and G. Sattler, "Fuel cell systems for submarines: from the first idea to serial production", Journal of Power Sources, Vol. 106, No. 1-2, 2002, pp. 381-383. https://doi.org/10.1016/S0378-7753(01)01044-8
  3. S. Krummrich and J. Llabres, "Methanol reformer - The next milestone for fuel cell powered submarines", International Journal of Hydrogen Energy, Vol. 40, No. 15, 2015, pp. 5482-5486. https://doi.org/10.1016/j.ijhydene.2015.01.179
  4. "SENER develop methanol reformer for fuel cell submarines", Fuel cells bulletin, Vol. 2012, No. 12, 2012, p. 2.
  5. "UTC Power to develop fuel cell for Spanish sub", Fuel Cells Bulletin, Vol. 2008, No. 1, 2008, p. 4.
  6. S. Sa, H. Silva, L. Brandao, J. M. Sousa, and A. Mendes, "Catalysts for methanol steam reforming-A review", Applied Catalysis B: Environmental, Vol. 99, 2010, pp. 43-57. https://doi.org/10.1016/j.apcatb.2010.06.015
  7. E. L. Reddy, J. Karuppiah, H. C. Lee, and D. H. Kim, "Steam reforming of methanol over copper loaded anodized aluminum oxide (AAO) prepared through electrodeposition", Journal of Power Sources, Vol. 268, 2014, pp. 88-95. https://doi.org/10.1016/j.jpowsour.2014.05.082
  8. Y. H. Huang, S. F. Wang, A. P. Tsai, and S. Kameoka, "Catalysts prepared from copper-nickel ferrites for the steam reforming of methanol", Journal of Power Sources, Vol. 281, 2015, pp. 138-145. https://doi.org/10.1016/j.jpowsour.2015.01.168
  9. P. H. Liao and H. M. Yang, "Preparation of Catalyst Ni-Cu/CNTs by Chemical Reduction with Formaldehyde for Steam Reforming of Methanol", Catal. Lett, Vol. 121, 2008, pp. 274-282. https://doi.org/10.1007/s10562-007-9329-9
  10. S. Patel and K.K. Pant, "Influence of preparation method on performance of Cu(Zn)(Zr)-alumana catalysts for the hydrogen production via steam reforming of methanol", Journal of Porous Materials, Vol. 13, 2006, pp. 373-378. https://doi.org/10.1007/s10934-006-8033-2
  11. H. Ji, E. Choi, and J. Lee, "Optimal operation condition of pressurized methanol fuel processor for underwater environment", Trans. of the Korean Hydrogen and New Energy Society, Vol. 27, No. 5, 2016, pp. 485-493. https://doi.org/10.7316/KHNES.2016.27.5.485
  12. G. Kolb, "Fuel Processing for Fuel Cells", John Wiley & Sons, Inc., USA, 2008.