DOI QR코드

DOI QR Code

Seismic applicability of a long-span railway concrete upper-deck arch bridge with CFST rigid skeleton rib

  • Shao, Changjiang (School of Civil Engineering, Key Laboratory of Ministry of Education of Traffic Tunnel Engineering, Southwest Jiaotong University) ;
  • Ju, Jiann-wen Woody (Department of Civil and Environmental Engineering, University of California) ;
  • Han, Guoqing (China Railway Eryuan Engineering Group Co. Ltd.) ;
  • Qian, Yongjiu (School of Civil Engineering, Key Laboratory of Ministry of Education of Traffic Tunnel Engineering, Southwest Jiaotong University)
  • Received : 2015.12.12
  • Accepted : 2016.12.06
  • Published : 2017.03.10

Abstract

To determine the seismic applicability of a long-span railway concrete upper-deck arch bridge with concrete-filled steel-tube (CFST) rigid skeleton ribs, some fundamental principles and seismic approaches for long-span bridges are investigated to update the design methods in the current Code for Seismic Design of Railway Engineering of China. Ductile and mixed isolation design are investigated respectively to compare the structural seismic performances. The flexural moment and plastic rotation demands and capacities are quantified to assess the seismic status of the ductile components. A kind of triple friction pendulum (TFP) system and lead-plug rubber bearing are applied simultaneously to regularize the structural seismic demands. The numerical analysis shows that the current ductile layout with continuous rigid frame approaching spans should be strengthened to satisfy the demands of rare earthquakes. However, the mixed isolation design embodies excellent seismic performances for the continuous girder approaching span of this railway arch bridge.

Keywords

Acknowledgement

Supported by : National Natural Science Fund Committee of China

References

  1. Alvarez, J.J., Aparicio, A.C., Jara, J.M. and Jara, M. (2012), "Seismic assessment of a long-span arch bridge considering the variation", Eng. Struct., 34, 69-80. https://doi.org/10.1016/j.engstruct.2011.09.013
  2. Applied Technology Council (1996), ATC-40, Seismic evaluation and retrofit of concrete buildings, Red Wood City, California.
  3. Becker, T.C. and Mahin, S.A. (2013), "Effect of support rotation on triple friction pendulum bearing behavior", Earthq. Eng. Struct. Dyn., 42, 1731-1748. https://doi.org/10.1002/eqe.2295
  4. California Department of Transportation (2008), CALTRANS. CALTRANS Seismic Design Criteria Version 1.4. California.
  5. Chen, L. (2012), Seismic Damage Investigation of Wenchuan Earthquake-Bridges, Renmin Jiaotong Press Co. Ltd, Beijing.
  6. Chen, W.F. and Duan, L. (2006), Bridge Engineering-Seismic Design, CRC Press, Boca Raton.
  7. Federal Emergency Management Agency (2000), FEMA 356, Prestandard and commentary for the seismic rehabilitation of buildings, Washington.
  8. Fenz, D.M. and Constantinou, M.C. (2008), "Spherical sliding isolation bearings with adaptive behavior: Theory", Earthq. Eng. Struct. Dyn., 37, 163-183. https://doi.org/10.1002/eqe.751
  9. Hu, N., Dai, G.L., Yan, B. and Liu, K. (2014), "Recent development of design and construction of medium and long span high-speed railway bridges in China", Eng. Struct., 74, 233-241. https://doi.org/10.1016/j.engstruct.2014.05.052
  10. Kawashima, K. and Mizoguti, A. (2000), "Seismic response of a reinforced concrete arch bridge", 12th World Conference on Earthquake Engineering, Auckland, New Zealand.
  11. Kitagawa, Y. and Hiraishi, H. (2004), "Overview of the 1995 Hyogo-ken Nanbu earthquake and proposals for earthquake mitigation measures", J. JPN Associat. Earthq. Eng., 4(3), 1-29.
  12. Mander, J.B. (1983), "Seismic design of bridge piers", PhD Dissertation, University of Canterbury, Christchurch, New Zealand.
  13. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "The theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1825. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  14. Ministry of Housing and Urban-Rural Construction of People's Republic of China (MHURC) (2011), CJJ166-2011, Seismic Design Specification for Urban Bridge, Building Industrial Press Comp. Ltd. of China, Beijing.
  15. Ministry of Railways of People's Republic of China (MR) (2009), GB 50111-2006, Seismic Design Specification for Railway Engineering, Plan Press Comp. Ltd. Of China, Beijing.
  16. Ministry of Transportation of People's Republic of China (MT) (2008), JTG/TB02-01-2008, Seismic Design Guide of Highway Bridges, People's Transportation Press Comp. Ltd., Beijing.
  17. Ministry of Transportation of People's Republic of China (MT) (2007), JTG D63-2007, Code for Design of Ground Base and Foundation of Highway Bridges and Culverts, People's Tranportation Press Comp. Ltd., Beijing.
  18. Morgan, T.A (2007), "The use of innovative basis isolation systems to achieve complex seismic performance objectives", PhD Thesis, University of California, Berkeley, California, USA.
  19. Morgan, T.A. and Mahin, S.A. (2008), "The optimization of multistage friction pendulum isolators for loss mitigation considering a range of seismic hazard", The 14th World Conference on Earthquake Engineering, Beijing, China.
  20. Morgan, T.A. and Mahin, S.A. (2011), "The use of base isolation systems to achieve complex seismic performance objectives", University of California, Berkeley, PEER Report, 2011/06.
  21. Murat, E. and Reginald, D.R. (2008)), "Bridge seismic response as a function of the Friction Pendulum System (FPS) modeling assumptions", Eng. Struct., 30, 3204-3212. https://doi.org/10.1016/j.engstruct.2008.04.032
  22. Naeim, F. and Kelly, J.M (1999), Design of Seismic Isolated Structures: from Theory to Practice, John Wiley & Sons Ltd., New York, NY.
  23. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-based Seismic Design of Structures, IUSS Press, Pavia, Italy.
  24. Usami, T., Lu, Z., Ge, H. and Kono, T. (2004), "Seismic performance evaluation of steel arch bridges against major earthquakes. Part 1: Dynamic analysis approach", Earthq. Eng. Struct. Dyn., 33, 1337-1354. https://doi.org/10.1002/eqe.407
  25. Xie, H. (2012), "Study on structural type selection and mechanical behaviors of long-span railway concrete arch bridge with rigid skeleton", PhD Dissertation, Southwest Jiaotong University.

Cited by

  1. The effect of base isolation and tuned mass dampers on the seismic response of RC high-rise buildings considering soil-structure interaction vol.17, pp.4, 2017, https://doi.org/10.12989/eas.2019.17.4.425
  2. Reaction Spectrum Comparative Analysis of Seismic Performance of 62 m CFST Bridge with Curved-String Truss before and after Reinforcement vol.2020, pp.None, 2017, https://doi.org/10.1155/2020/4536365
  3. Seismic performance and design of bridge piers with rocking isolation vol.73, pp.4, 2020, https://doi.org/10.12989/sem.2020.73.4.447
  4. Experimental study and application of manufactured sand self-compacting concrete in concrete-filled-steel-tube arch bridge: A case study vol.15, pp.None, 2017, https://doi.org/10.1016/j.cscm.2021.e00718