실시간 플라즈마공정 모니터링을 위한 Self Plasma-Optical Emission Spectroscopy 성능 향상

Improved Self Plasma-Optical Emission Spectroscopy for In-situ Plasma Process Monitoring

  • Jo, Kyung Jae (Department of Electronic Engineering, Myongji University) ;
  • Hong, Sang Jeen (Department of Electronic Engineering, Myongji University)
  • 투고 : 2017.06.16
  • 심사 : 2017.06.26
  • 발행 : 2017.06.30

초록

We reports improved monitoring performance of Self plasma-optical emission spectroscopy (SP-OES) by augmenting a by-pass tube to a conventional straight (or single) tube type self plasma reactor. SP-OES has been used as a tool for the monitoring of plasma chemistry indirectly in plasma process system. The benefits of SP-OES are low cost and easy installation, but some semiconductor industries who adopted commercialized SP-OES product experiencing less sensitivity and slow sensor response. OH out-gas chemistry monitoring was performed to have a direct comparison of a conventional single type tube and a by-pass type tube, and fluid dynamic simulation on the improved hardware design was also followed. It is observed faster pumping out of OH from the chamber in the by-pass type SP-OES.

키워드

참고문헌

  1. Y. Kasashima, H. Kurita, N. Kimura, A. Ando, and F. Uesugi, "Monitoring of Inner Wall Condition in Mass-Production Plasma Etching Process Using a Load Impedance Monitoring System," Jap. J. Applied Physics, Vol. 54, No. 6, 060301, 2015. https://doi.org/10.7567/JJAP.54.060301
  2. J. Gu, P. A. Thadesar, A. Dembla, M. S. Bakir, G. S. May, S. Hong, "Endpoint Detection in Low Open Area TSV Fabrication Using Optical Emission Spectroscopy," IEEE Trans. Comp., Pack., Manufac. Tech, Vol. 4, No. 4, 1251-1260, 2014. https://doi.org/10.1109/TCPMT.2014.2323070
  3. M.-S. Choi, T. Jang, S.-H. Lee, and G.-H. Kim, "Investigation of Spatial Distribution of Plasma Density between the Electrode and Lateral Wall of Narrow-gap CCP Source," J. Semi. & Disp. Technol., Vol. 13, No. 4, pp. 1-5, 2014.
  4. S. Kim and H. Yi, "Process Monitoring Device and Semiconductor Processing Apparatus Including the Same," Patent US20110222058 A1, 2011.