참고문헌
- E. Degarmo, J. Black, R. Kohser, Materials and Processes in Manufacturing, Macmillan Publishing Co., 1990.
- S. Pugh, Total Design: Integrated Methods for Successful Product Engineering, Addison-Wesley Publishing Co., 1991.
- R. A. Malloy, Plastic Part Design for Injection Molding, Hanser Publisher, 1994.
- M. Cog, T. Altan, "An overall Review of the Tube Hydroforming Technology," J. Mater. Proc. Technol., Vol. 108, pp. 384-393, 2001. https://doi.org/10.1016/S0924-0136(00)00830-X
- M. Merklein, M. Johannes, M. Lechner, A. Kuppert, "A Review on Tailored Blanks-Production, Applications and Evaluation," J. Mater. Proc. Technol., Vol. 214, pp. 151-164, 2014. https://doi.org/10.1016/j.jmatprotec.2013.08.015
- I. S. Um, S. M. Na, Y. G. Kim, H. S. Kim, D. S. Park, "Optimal Application of Automotive Cowl Cross Bar Using Hydroforming Technology," Proc. Kor. Soc. Mech. Eng. Conf., pp. 13-18, 2007.
- K. Swiatkowsk, R. Hatalak, "Study of the New Floating-Plug Drawing Process of Thin-Walled Tubes", J. Mater. Proc. Technol., Vol. 151, pp. 105-114, 2004. https://doi.org/10.1016/j.jmatprotec.2004.04.024
- T. Kuboki, N. Nishida, T. Sakaki, M. Murata, "Effect of Plug on Leveling of Residual Stress in Tube Drawing," J. Mater. Proc. Technol., Vol. 204, pp. 162-168, 2008. https://doi.org/10.1016/j.jmatprotec.2007.11.029
- S. W. Kim, Y. N. Kwon, Y. S. Lee, J. H. Lee, "Design of Mandrel in Tube Drawing Process for Automotive Steering Input Shaft," J. Mater. Proc. Technol., Vol. 187-188, pp. 182-186, 2007. https://doi.org/10.1016/j.jmatprotec.2006.11.134
- D. H. Kim, D. J. Kim, B. M. Kim, "Process Design of Multi-Step Wire Drawing Using Artificial Neural Network," Trans. Mater. Process, Vol. 7, No. 2, pp. 127-138, 1998.
- H. Kim, J. Youn, H. Rhee, "Development of Combined Tube Drawing Process for Straight-Type Cowl Cross Bar of Automobile", Int. J. Prec. Eng., Vol. 15, No. 10, pp. 2093-2099, 2014. https://doi.org/10.1007/s12541-014-0568-6
- Q. Zhang, K. Jin, D. Mu, P. Ma, "Rotary Swaging Forming Process of Tube Workpiece", Procedia Eng., Vol. 81, pp. 2336-2341, 2014. https://doi.org/10.1016/j.proeng.2014.10.330
- M. Herrmann, C. Schenck, B. Kuhfuss, "Dry Rotary Swaging with Structured Tools," Procedia CIRP, Vol. 40, pp. 653-658, 2016. https://doi.org/10.1016/j.procir.2016.01.150
- A. Piela, F. Grosman, "Spatial Modeling of Swaging Process Using Finite Element Method Applied to Axially-Symmetrical Problems," J. Mater. Proc. Technol., Vol. 60, pp. 517-522, 1996. https://doi.org/10.1016/0924-0136(96)02380-1
- H. Kim, J. Youn, "Development of One-Piece Manufacturing Process for Automotive Cowl Cross Bar Using Rotary Swaging", Trans. Mater. Proc., Vol. 25, No. 5, pp. 332-336, 2016. https://doi.org/10.5228/KSTP.2016.25.5.332