DOI QR코드

DOI QR Code

A Study on the Optimal Design of the Transformer in the PSFB Converter

PSFB 컨버터에서 변압기 최적 설계에 관한 연구

  • Lee, Il-Oun (Dept. of Electrical Energy Engineering, Keimyung University)
  • 이일운 (계명대학교 전자전기공학부)
  • Received : 2016.08.10
  • Accepted : 2016.09.24
  • Published : 2016.09.30

Abstract

In the Phase Shifted Full Bridge(: PSFB) converter, there are several design factors including power switches, power switches' driving circuits, transformer and inductor, and rectifier stage, etc. Among them, a key factor influencing an optimal performance of the PSFB converter is the design of transformer. Especially, its effect becomes more important in low voltage and high power applications. In this paper, a study on an optimal design of transformer in the PSFB converter is presented. The design equations for the transformer are derived and analyzed in details, and an example design of the transformer for a 12V, 1200W server power supply application is showed as the result of analysis.

위상변조 풀브리지 컨버터를 설계, 개발하는데 있어, 전력반도체와 그 전력반도체 구동회로, 변압기 및 인덕터, 정류기 등을 포함한 많은 설계 요인들이 존재한다. 그 중에서 위상변조 풀브리지 컨버터의 최적 성능에 매우 큰 영향을 끼치는 것은 변압기 설계이다. 특히 변압기 설계는 대형 컴퓨터 데이터센터에 사용되는 전원장치에서처럼 저전압, 고전류 응용에서 매우 중요하다. 이 논문에서는 위상변조 풀브리지 컨버터의 최적 성능을위한 변압기 설계에 관한 연구 결과를 발표한다. 변압기 설계에 관련된 설계 수식들을 유도하고 세밀한 분석을 한다. 이를 토대로, 12V, 1200W 서버전원장치 응용을 위한 위상변조 풀브리지 컨버터 최적 성능을 위한 변압기 설계를 결과물로 제시한다.

Keywords

References

  1. I. Lee and G. Moon, "Soft-Switching DC/DC Converter with a Full ZVS Range and Reduced Output Filter for High-Voltage Applications," IEEE Trans. Power Electron, vol. 28, no. 1, Jan. 2013, pp. 112-122.
  2. I. Lee, S. Cho, and G. Moon, "Improved Phase-Shift PWM Converters for larger-sized PDP slim sustain power module," IEEE Trans. Power Electron, vol. 28, no. 2, Feb. 2013, pp. 945-958. https://doi.org/10.1109/TPEL.2012.2202251
  3. I. Lee and G. Woon, "Half-bridge Integrated ZVS Full-Bridge Converter With Reduced Conduction Loss for Electric Vehicle Battery Chargers," IEEE Trans. Ind. Electron, vol. 61, no. 8, Aug. 2014, pp. 3978-3988. https://doi.org/10.1109/TIE.2013.2282608
  4. Y. Chai and W. Do, "Development of 2kW Power Bidirectional LDC for Electric Vehicle," J. of the Korea Institute of Electronic Communication Sciences, vol. 11, no. 1, 2016, pp. 65-72. https://doi.org/10.13067/JKIECS.2016.11.1.65
  5. Y. Cho and J. Lai, "Digital Plug-In Repetitive Controller for Single-Phase Bridgeless PFC Converters," IEEE Trans. Power Electron, vol. 28, no. 1, Jan. 2013, pp. 165-175. https://doi.org/10.1109/TPEL.2012.2196288
  6. L. Mweene, C. Aright, and M. Schlecht, "A 1 kW 500 kHz Front-End Converter for a Distributed Power Supply System," IEEE Trans. Power Electron, vol. 6, no. 3, July 1991, pp. 398-407. https://doi.org/10.1109/63.85908
  7. C. Jung, "Design Procedures of LLC Resonant Converter for Electric Vehicle On-Board Charger," J. of the Korea Institute of Electronic Communication Sciences, vol. 9, no. 1, 2014, pp. 91-96. https://doi.org/10.13067/JKIECS.2014.9.1.91
  8. C. Jung, "Input Ripple Current Formula Analysis of Multi-Stage Interleaved Boost Converter," J. of the Korea Institute of Electronic Communication Sciences, vol. 6, no. 6, 2011, pp. 865-871.
  9. R. Ayyanar and N. Mohan, "Novel Soft-Switching DC-DC Converter with Full ZVS-Range and Reduced Filter Requirement," IEEE Trans. Power Electron, vol. 16, no. 2, March 2001, pp. 184-192. https://doi.org/10.1109/63.911142
  10. J. Cho, K. Park, J. Park, G. Moon, and M. Youn, "Design of a Digital Offset Compensator Eliminating Transformer Magnetizing Current Offset of a Phase-Shift Full-Bridge Converter," IEEE Trans. Power Electron, vol. 27, no. 1, Jan. 2012, pp. 331-341. https://doi.org/10.1109/TPEL.2011.2158115