한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제15권4호
  • /
  • Pages.109-117
  • /
  • 2016
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

새로운 디버링 공구를 이용한 드릴링 버의 효율적 제거를 위한 가공조건 선정

Determination of Cutting Conditions for an Efficient Deburring Process Using a New Deburring Tool

  • 배준경 (경남과학기술대학교 메카트로닉스공학과) ;
  • 박하영 (건국대학교 기계공설계학과) ;
  • 권병찬 (건국대학교 기계공설계학과) ;
  • 고성림 (건국대학교 기계공설계학과)
  • Bae, Jun-Kyung (Department of Mechatronics Engineering, GNTECH UNIV.) ;
  • Park, Ha-Young (Mechnical Design and Production Engneering, Konkuk UNIV.) ;
  • Kwon, Byeong-Chan (Mechnical Design and Production Engneering, Konkuk UNIV.) ;
  • Ko, Sung-Lim (Mechnical Design and Production Engneering, Konkuk UNIV.)
  • 투고 : 2016.06.20
  • 심사 : 2016.07.29
  • 발행 : 2016.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

For efficient deburring of burrs that form inside mechanical parts after drilling, new special deburring tool was developed specifically for the burr found at intersecting holes. In this paper, the process for finding ideal cutting conditions has been carried out to identify the efficient performance of deburring using a new tool. The burrs at the entrance and exit surface were analyzed for efficient removal. The surface roughness after deburring was also reviewed for better performance. In addition, the influence of the feed rate on deburring quality was analyzed for improved productivity. Through this process, a new deburring tool can be applied effectively to remove burrs formed at intersecting holes.

키워드

참고문헌

  1. Shin, K. S., "Effect of Surface Roughness on Cutting Conditions in CNC lathe C-Axis Milling Arc Cutting," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 4, pp. 99-105, 2014.
  2. Noh, Y. H., "A Study on Surface Roughness of Aluminum 7075 to Nose Radius and Cooling Method in CNC Lathe Machining," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 85-91, 2015.
  3. Chun, S. H., "Effects of cutting condition on surface roughness in the spiral up milling of aluminum alloy," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 4, pp. 83-90, 2014. https://doi.org/10.14775/ksmpe.2014.13.4.083
  4. Lee, Y. C., Shin, G. H., and Kwak, T. S., "Deburring Technology of Vacuum Plate for MLCC Lamination Using Magnetic Abrasive Polishing and ELID Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 149-154, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.149
  5. Li, H., Ko, T. J., and Baek, D. K., "A Study on Preventing Cracks at the Small Hole Exit in Ultrasonic Machining Using a Wax Coating," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 105-111, 2015.
  6. Kim, J., Min, S., and Dornfeld, D. A., "Optimization and control of drilling burr formation of AISI 304L and AISI4118 based on drilling burr control charts," International Journal of Machine Tools and Manufacture, Vol. 41, No. 7, pp. 923-936, 2001. https://doi.org/10.1016/S0890-6955(00)00131-0
  7. Min, S., and Dornfeld, D. A., Kim, J., and Shyu, B., "Finite element modeling of burr formation in metal cutting," Machining science and technology, Vol. 5, No. 3, pp. 307-322, 2001. https://doi.org/10.1081/MST-100108617
  8. Jeong, Y. H., HanYoo, B., Lee, H. U., Min, B. K., Cho, D. W., and Lee, S. J., "Deburring microfeatures using micro-EDM," Journal of Materials Processing Technology, Vol. 209, No. 14, pp. 5399-5406, 2009. https://doi.org/10.1016/j.jmatprotec.2009.04.021
  9. Lee, S. H., and Dornfeld, D. A., "Precision laser Deburring," Jounal of Manufacturing Science and Engineering, Vol. 123, No. 4, pp. 601-608, 2001. https://doi.org/10.1115/1.1381007
  10. Lee, K. U., and Ko, S. L., ."Development of Deburring Tool for Burrs at Intersecting Holes," Journal of Materials Processing Technology, Vol. 20, No. 1, pp. 454-459, 2008.
  11. Park, H. Y., "Development of Deburring tool for the improvement of the cleanability of mechanical part," A Thesis of Master's degree, Konkuk Univeristy, Republic of Korea, 2010.
  12. Ton, T. P., Park, H. Y., and Ko, S. L., "Experiment alanalysis of deburring process on inclined exit surface by new deburring tool," CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 129-132, 2011. https://doi.org/10.1016/j.cirp.2011.03.124
  13. Ko, S. L., "Measurement and Effective Deburring for the Micro Burrs in Piercing Operation," International Journal of Korean Society of Precision Engineering and manufacturing, Vol. 1, No. 1, pp. 152-159, 2000.
  14. Min, S., and Dornfeld, D. A., and Nakao, Y. "Influence of exit surface angle on drilling burr formation," Journal of Manufacturing Science and Engineering, Vol. 125, No. 4, pp. 637-644, 2003. https://doi.org/10.1115/1.1596573

피인용 문헌

  1. A Study on the Drilling Performance of the Assembly Machine for the an Aircraft’s Main Wings vol.17, pp.1, 2018, https://doi.org/10.14775/ksmpe.2018.17.1.008
  2. Evaluation of a hybrid cryogenic deburring method to remove uncut fibers on carbon fiber-reinforced plastic composites vol.101, pp.5, 2016, https://doi.org/10.1007/s00170-018-3045-z
  3. Automatic Design of Hot Air Process for Deburring of Blow Injection Molded Products vol.28, pp.4, 2019, https://doi.org/10.7735/ksmte.2019.28.4.232
  4. 면취 공정의 능동 제어를 위한 공압식 자동 강재 면취기와 센서 시스템의 제작 및 실험 vol.19, pp.12, 2016, https://doi.org/10.14775/ksmpe.2020.19.12.080
  5. 구멍가공 시 경사진 출구면에 발생한 버의 효율적 제거를 위한 디버링 공구의 공구경사각과 강성의 결정 vol.20, pp.6, 2016, https://doi.org/10.14775/ksmpe.2021.20.06.001