DOI QR코드

DOI QR Code

Color Evolution in Single Crystal Colored Cubic Zirconias With Annealing Atmosphere and Temperature

  • Song, Jeongho (Department of Materials Science and Engineering, University of Seoul) ;
  • Noh, Yunyoung (Department of Materials Science and Engineering, University of Seoul) ;
  • Song, Ohsung (Department of Materials Science and Engineering, University of Seoul)
  • 투고 : 2016.04.01
  • 심사 : 2016.05.16
  • 발행 : 2016.07.31

초록

Color change in single-crystal, yellow, red, purple, and colorless cubic zirconias (CZs) was investigated as a function of annealing in vacuum and air atmosphere at $800-1400^{\circ}C$ for 30 min, for development of a damascene process of plugging a precious metal paste at the elevated temperature. Coloring-element contents of the CZs were evaluated using WD-XRF, and the color change determined visually by naked eye, and using a digital camera and UV-Vis-NIR color analyzer. WD-XRF showed that all of the CZs had cubic-phase stabilizer elements and coloring elements. All CZs that underwent vacuum annealing exhibited a slight color change at $<900^{\circ}C$, while their colors began to change to black at $1100^{\circ}C$, and became opaque black at $1400^{\circ}C$. After air annealing, there was almost no color change up to $1400^{\circ}C$. Since red and purple CZs showed greater color difference (CD) values than the others, the degree of CD is likely to depend on the original color of the CZ due to the different stabilities of their coloring elements during annealing. Based on our results, it is suggested that annealing in air at $<900^{\circ}C$ is advantageous, and assorted colored CZs can be used for precious metal damascene.

키워드

참고문헌

  1. G. Stapper, M. Bernasconi, N. Nicoloso, and M. Parrinello, "Ab Initio Study of Structural and Electronic Properties of Yttria-Stabilized Cubic Zirconia," Phys. Rev. B, 59 [2] 797-810 (1999).
  2. J. Wang and R. Stevens, "Toughening Mechanisms in Duplex Alumina-Zirconia Ceramics," J. Mater. Sci., 23 [3] 804-8 (1988). https://doi.org/10.1007/BF01153970
  3. D. L. Wood and K. Nassau, "Refractive Index of Cubic Zirconia Stabilized with Yttria," Appl. Opt., 21 [16] 2978-81 (1982). https://doi.org/10.1364/AO.21.002978
  4. H. J. F. Jansen, "Electronic Structure of Cubic and Tetragonal Zirconia," Phys. Rev. B, 43 [9] 7267-78 (1991). https://doi.org/10.1103/PhysRevB.43.7267
  5. J. H. Lee, "Korea Jewelry Market Research 2015," pp. 43-44, Aram publishing, Seoul, 2015.
  6. S. R. Casolco, J. Xu, and J. E. Garay, "Transparent/Translucent Polycrystalline Nanostructured Yttria Stabilized Zirconia with Varying Colors," Scr. Mater., 58 [6] 516-19 (2008). https://doi.org/10.1016/j.scriptamat.2007.11.014
  7. R. W. Hesse, Jewerlymaking Through History: An Encyclopedia; pp. 88-9, Greenwood Press, London, 2007.
  8. F. Li, Y. Shen, and O. S. Song, "Color Enhancement for Cubic Zirconia with Low Temperature Annealing," J. Korea Acad. Industr. Coop. Soc., 11 [4] 1186-91 (2010). https://doi.org/10.5762/KAIS.2010.11.4.1186
  9. Y. Shen, K. J. Nam, and O. S. Song, "A Study on the Color Change Mechanism by Vacuum Annealing in Cubic Zirconia," J. Korea Acad. Industr. Coop. Soc., 11 [10] 3621-25 (2010). https://doi.org/10.5762/KAIS.2010.11.10.3621
  10. S. Murali and V. K. Govindan, "Shadow Detection and Remocal from a Single Image Using Lab Color Space," Bulg. Acad. Sci., 13 [1] 95-103 (2013).
  11. I. L. Weatherall and B. D. Coombs, "Skin Color Measurements in Terms of CIELab Color Space Values," J. Invest. Dermatol., 99 [4] 468-73 (1992). https://doi.org/10.1111/1523-1747.ep12616156
  12. L. Jin and D. Li, "A Switching Vector Median Filter Based on the CIELAB Color Space for Color Image Restoration," Signal Process., 87 [6] 1345-54 (2007). https://doi.org/10.1016/j.sigpro.2006.11.008
  13. A. Bogicevic, C. Wolverton, G. M. Crosbie, and E. B. Stechel, "Defect Ordering in Aliovalently Doped Cubic Zirconia from First Principles," Phys. Rev. B, 64 [1] 014106 (2001). https://doi.org/10.1103/PhysRevB.64.014106
  14. F. J. Ritzert, H. M. Yun, and R. V. Miner, "Single Crystal Fibers of Yttria-Stabilized Cubic Zirconia with Ternary Oxide Additions," J. Mater. Sci., 33 [22] 5339-49 (1998). https://doi.org/10.1023/A:1004438031140
  15. F. Guo and P. Xiao, "Effect of $Fe_2O_3$ Doping on Sintering of Yttria-Stabilized Zirconia," J. Eur. Cera. Soc., 32 [16] 4157-64 (2012). https://doi.org/10.1016/j.jeurceramsoc.2012.07.035
  16. G. A. Gogotsi, S. N. Dub, B. I. Ozerskii, D. Y. Ostrovoi, G. E. Khomenko, E. E. Lomonova, S. K. Batygov, M. A. Vishnyakova, V. F. Kalabukhova, S. V. Lavrishchev, and V. A, Myzina, "Zirconia Crystals with Yttrium and Cerium Oxides," Refract. Ind. Ceram., 36 [7] 199-207 (1995).
  17. R. Ianos and R. Lazau, "Chromium-Doped Calcium Zirconate-A Potential Red Shade Pigment: Preparation, Characterization and Testing," Dyes Pigments, 105 152-56 (2014). https://doi.org/10.1016/j.dyepig.2014.02.007

피인용 문헌

  1. Enhancing wicking microflows in metallic foams vol.21, pp.12, 2017, https://doi.org/10.1007/s10404-017-2018-0
  2. Color Variation in Color-shade Polycrystalline Zirconia Ceramics by the Atmosphere Controlled Firing vol.55, pp.2, 2018, https://doi.org/10.4191/kcers.2018.55.2.02