The KSFM Journal of Fluid Machinery (한국유체기계학회 논문집)

Korean Society for Fluid machinery (한국유체기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Flow Characteristics of an Oxidizer Feed Section for Wet-air Oxidation in Gravity Pressure Reactor

중력식 습식산화반응기 내 산화제 공급부의 유동특성에 관한 연구

  • Lee, Hongcheol (Environmental and Plant Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Hwang, Inju (Environmental and Plant Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology)
  • 이홍철 (한국건설기술연구원 환경.플랜트연구소) ;
  • 황인주 (한국건설기술연구원 환경.플랜트연구소)
  • Received : 2016.03.29
  • Accepted : 2016.05.16
  • Published : 2016.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The wet-air oxidation in gravity pressure reactor is effective for organic waste treatment with energy saving under high pressure and high temperature. But its oxidation control is difficulty because its multi-phase flow characteristics is very complicated. The flow characteristics of an oxidizer feed section in the gravity pressure reactor were investigated using numerical method which are verified by comparison with experimental results. In this study, the results showed that the flow rate of oxidizer have an effect on the generation of bubble around feed section.

Keywords

References

  1. H. Debellefontaine and J. N. Foussard, 2000, "Wet air oxidation for the treatment of industrial wastes. Chemical aspects, reactor design and industrial applications in Europe," Waste management, Vol. 20, pp. 15-25. https://doi.org/10.1016/S0956-053X(99)00306-2
  2. H. C. Lee. and I. J. Hwang, 2010, "A study on the thermal characteristics in the GPV reactor of WAO at start up," KSME 2010 spring conference, pp. 299-304.
  3. H. C. Lee, J. H. Ahn, and I. J. Hwang, 2010, "A numerical study on the control of reaction heat in GPV-WAO system," SAREK 2010 summer conference, pp. 727-732.
  4. H. C. Lee and I. J. Hwang, 2010, "A numerical study on the flow characteristics around oxidizer supply nozzle of GPV type WAO reactor," 2010 ANSYS conference, p. 89.
  5. J. I. Yoo, I. B. Lee, H. S. Hwang, and Y. H. Kim, 2009, "Utilization of CFD simulation model for a bubble column photo bioreactor," Journal of the Korean society of agricultural engineers, Vol. 51, No. 5, pp. 1-8. https://doi.org/10.5389/KSAE.2009.51.5.001
  6. M. Lovo, H. A. Deans, and V. Balakotaiah, 1990, "Modeling and simulation of aqueous hazardous waste oxidation in deep well reactors," Chemical Engineering Science, Vol. 45, No. 8, pp. 2703-2710. https://doi.org/10.1016/0009-2509(90)80161-7