References
- Martin AC, Will NS. Effect of flow distribution on emissions performance of catalytic converters. SAE technical paper no. 980936. 1998
- Deutschmann Olaf, Lanny D. Schmidt modeling the partial oxidation of methane in a short-contact-time reactor. AIChE Journal 1998;44(1)2465-77. https://doi.org/10.1002/aic.690441114
- Braun J, Hauber T, Tobben H, Zacke P. Influence of physical and chemical parameters on the conversion rate of a catalytic converter: a numerical simulation study. SAE technical paper no. 2000-01-0211. 2000.
- Wu Guojiang, Tan Song. CFD simulation of the effect of upstream flow distribution on the light-off performance of a catalytic converter. Energy Conversion and Management 2001;46(13-14)2010-31. https://doi.org/10.1016/j.enconman.2004.11.001
- Shuai Shi-Jin, Wang Jian-Xin. Unsteady temperature fields of monoliths in catalytic converters. Chemical Engineering Journal, 2004;100(1-3)95-107. https://doi.org/10.1016/j.cej.2004.01.013
- Zhang X, Tennison P. Numerical study of flow uniformity and pressure loss through a catalytic converter with two substrates. SAE technical paper no. 2008-01-0614. 2008.
- Hayes RE, Fadic A, Mmbaga J, Najafi A. CFD modelling of the automotive catalytic converter. Catalysis Today 2012;188(1)94-105. https://doi.org/10.1016/j.cattod.2012.03.015
- Zygourakis K. Transient operation of monolith catalytic converters: a two-dimensional reactor model and the effects of radially nonuniform flow distributions. Chemical Engineering Science 1989;44(9)2075-86. https://doi.org/10.1016/0009-2509(89)85143-7
- Lai MC, Lee T, Kim JY, Cheng CY, Li P, Chui G. Numerical and experimental characterizations of automotive catalytic converter internal flows. Journal of Fluids and Structures 1992;6(4)451-70. https://doi.org/10.1016/0889-9746(92)90026-Y
- Hwang K, Lee K, Mueller J, Stuecken T, Schock HJ, Lee, J-C. Dynamic flow study in a catalytic converter using laser doppler velocimetry and high speed flow visualization. SAE technical paper no. 950786. 1995.
- Jahn R, Snita D, Kubicek M, Marek M. 3-D modelling of monolith reactors. Catalysis Today 1997;38(1)39-46. https://doi.org/10.1016/S0920-5861(97)00037-0
- Martin A, Will N, Bordet A, Cornet P. Effect of flow distribution on emissions performance of catalytic converters. SAE technical paper no. 980936. 1998.
- Jeong S, Kim W. A numerical approach to investigate transient thermal and conversion characteristics of automotive catalytic converter. SAE technical paper no. 980881. 1998.
- Heibel A, Spaid MAA. A new converter concept providing improved flow distribution and space utilization. SAE technical paper no. 1999-01-0768. 1999.
- Wollin J, Benjamin SF. A study of the flow performance of ceramic contoured substrates for automotive exhaust catalyst systems. SAE technical paper no. 993624. 1999.
- Taylor W. CFD prediction and experimental validation of high-temperature thermal behavior in catalytic converters. SAE technical paper no. 1999-01-0454. 1999.
- Breuer M, Schernus C, Bowing R, Kuphal A. Experimental approach to optimize catalyst flow uniformity. SAE technical paper no. 2000-01-0865. 2000.
- Shi-jin S, Jian-xin W, Ren-jun Z, Jun-rui C. Study on flow characteristics of automotive catalytic converters with various configurations. SAE technical paper no. 2000-01-0208. 2000.
- Shuai SJ, Wang JX, Dong QL, Zhuang Piv RJ. Measurement and numerical simulation of flows in automotive catalytic converters. SAE technical paper no. 2001-01-3494. 2001.
- Badami M, Millo F, Zuarini A. CFD analysis and experimental validation of the inlet flow distribution in close coupled catalytic converters. SAE technical paperno. 2003-01-3072. 2003.
- Windmann J, Braun J, Zacke P, Tischer S, Deutschmann O, Warnatz J. Impact of the inlet flow distribution on the light-off behavior of a 3-way catalytic converter. SAE technical paper no. 2003-01-0937. 2003.
- Chakravarthy VK, Conklin JC, Daw CS, D'Azevedo EF. Multi-dimensional simulations of cold-start transients in a catalytic converter under steadyinflow conditions. Applied Catalysis A-General 2003;241(1)289-306. https://doi.org/10.1016/S0926-860X(02)00490-8
- Holmgren A, Gronstedt T, Andersson B. Improved flow distribution in automotive monolithic converters. Reaction Kinetics and Catalysis Letters, 1997;60(2)363-71. https://doi.org/10.1007/BF02475700
- Voltz SE, Morgan CR, Liederman D, Jacob SM. Kinetic study of carbon monoxide and propylene oxidation on platinum catalysts. Industrial and Engineering Chemistry Product Research and Development 1973;12(4)294-301. https://doi.org/10.1021/i360048a006
- Windmann J, Braun J, Zacke P, Chatterjee D, Deutschmann O, Warnatz J. Impact of the inlet flow distribution on the light-off behavior of a 3-way catalytic converter. SAE technical paper no. 2003-01-0937. 2003.
- Campbell B, Finch A, Tancell P, Hitchings A. Effect of catalyst inlet cone flow mal-distribution on emissions performance of a close-coupled catalytic converter. SAE technical paper no. 2004-01-1489. 2004.
- Mazumder S, Sengupta D. Sub-grid scale modeling of heterogeneous chemical reactions and transport in full-scale. Combustion and Flame 2002;131(1)85-97. https://doi.org/10.1016/S0010-2180(02)00392-9
- Mazumder S. A new numerical procedure for coupling radiation in participating media with other modes of heat transfer. Journal of Heat Transfer 2005;127(9)1037-45. https://doi.org/10.1115/1.1929780
- Kumar A, Mazumder S. Toward simulation of full-scale monolithic catalytic converters with complex heterogeneous chemistry. Computers & Chemical Engineering 2010;34(2)135-45. https://doi.org/10.1016/j.compchemeng.2009.05.018
- Tsinoglou DN, Koltsakis GC, Missirlis DK, Yakinthos KJ. Transient modelling of flow distribution in automotive catalytic converters. Applied Mathematical Modelling 2004;28(9)775-94. https://doi.org/10.1016/j.apm.2003.12.006
- Salasc S, Barrieu E, Leroy V. Impact of manifold design on flow distribution of a close-coupled catalytic converter. SAE technical paper no. 2005-01-1626. 2005.
- Zhang X, Romzek M, Keck M, Kurz F. Numerical optimization of flow uniformity in front of diesel particular filters. SAE technical paper no. 2005-01-3720. 2005.
- Guojiang W, Song T. CFD simulation of the effect of upstream flow distribution on the light-off performance of a catalytic converter. Energy Conversion and Management 2005;46(13-14)2010-31. https://doi.org/10.1016/j.enconman.2004.11.001
- Shuai S, Wang J. Unsteady temperature fields of monoliths in catalytic converters. Chemical Engineering Journal 2004;100(1-3)95-107. https://doi.org/10.1016/j.cej.2004.01.013
- Lun H, Xiaowei N, Liang Z, Yongping L, He Z, Wei H. CFD simulation of the effect of monolith wall thickness on the light off performance of a catalytic converter. International Journal of Chemical Reactor Engineering 2010;8(1)1542-6580.
- Jeong S, Kim T. CFD investigation of the 3-dimensional unsteady flow in the catalytic converter. SAE technical paper no. 971025. 1997.
- Zhang X, Gomulka T, Romzek M. Numerical optimization of flow uniformity inside an F-oval substrate. SAE technical paper no. 2007-01-1088. 2007.
Cited by
- Improvement of flow behavior in the spiral casing of Francis hydro turbine model by shape optimization vol.34, pp.9, 2020, https://doi.org/10.1007/s12206-020-0817-9
- Air flow quality analysis of an open-circuit boundary layer wind tunnel and comparison with a closed-circuit wind tunnel vol.32, pp.12, 2020, https://doi.org/10.1063/5.0031613