참고문헌
- Jain, S., Joshi, A., and Bansal, P. K., 2007, A new approach to numerical simulation of small sized plate heat exchangers with chevron plates, Journal of Heat Transfer, Vol. 129, pp. 291-297. https://doi.org/10.1115/1.2430722
- Sarraf, K., Launay, S., and Tadrist, L., 2015, Complex 3D-flow analysis and corrugation angle effect in plate heat exchangers, International Journal of Thermal Sciences, Vol. 94, pp. 126-138. https://doi.org/10.1016/j.ijthermalsci.2015.03.002
- Dovic, D., Palm, B., and Svaic, S., 2009, Generalized correlations for predicting heat transfer and pressure drop in plate heat exchanger channels of arbitrary geometry, International Journal of Heat and Mass Transfer, Vol. 52, pp. 4553-4563. https://doi.org/10.1016/j.ijheatmasstransfer.2009.03.074
- Focke, W. W. and Knibbe, P. G., 1986, Flow visualization in parallel-plate ducts with corrugated walls, Journal of Fluid Mechanics, Vol. 165, pp. 73-77. https://doi.org/10.1017/S0022112086003002
- Gherasim, I., Taws, M., Galanis., N., and Nguyen, C. T., 2011, Heat transfer and fluid flow in a plate heat exchanger part I. Experimental investigation, International Journal of Thermal Sciences, Vol. 50, pp. 1492- 1498. https://doi.org/10.1016/j.ijthermalsci.2011.03.018
- Gherasim, I., Galanis, N., and Nguyen, C. T., 2011, Heat transfer and fluid flow in a plate heat exchanger. Part II : Assessment of laminar and two-equation turbulent models, International Journal of Thermal Sciences, Vol. 50, pp. 1499-1511. https://doi.org/10.1016/j.ijthermalsci.2011.03.017
- Kanaris, A. G., Mouza, A. A., and Paras, S. V., 2006, Flow and heat transfer prediction in a corrugated plate heat exchanger using a CFD Code, Chemical Engineering and Technology, Vol. 29, pp. 923-930. https://doi.org/10.1002/ceat.200600093
- Lee, J. and Lee, K., 2014, Flow characteristics and thermal performance in chevron type plate heat exchangers, International Journal of Heat and Mass Transfer, Vol. 78, pp. 699-706. https://doi.org/10.1016/j.ijheatmasstransfer.2014.07.033