Acknowledgement
Supported by : 한국연구재단
References
- Sweeney, K. and Grunewald, U., "The application of roll forming for automotive structural parts," J. Mater. Process. Technol., Vol. 132, No. 1-3, pp. 9-15, 2003. https://doi.org/10.1016/S0924-0136(02)00193-0
- Son, H. J., Kim, S. Y., Oh, B. S. and Kim, K. S., "Development of Vehicle Door Side Impact Beam with High Tensile Steel using Roll Forming Process," J. Korean Soc. Manuf. Process Eng., Vol. 11, No. 6, pp. 82-87, 2012.
- Park, S. P. and Kwon, Y. J., "The Study of Roll-forming Technology for UHSS Hydroformed Parts," Trans. Korean Soc. Automot. Eng., Vol. 23, No. 1, pp. 41-48, 2015. https://doi.org/10.7467/KSAE.2015.23.1.041
- Kim, D. H. and Jung, D. W., "Roll Forming Analysis for High Strength Steel Bumper Process," J. Korean Soc. Precis. Eng., Vol. 30, No. 8, pp. 797-801, 2013. https://doi.org/10.7736/KSPE.2013.30.8.797
- Uemori, T., Okada, T. and Yoshida, F., "Simulation of Springback in V-bending Process by Elasto-Plastic Finite Element Method with Consideration of Bauschinger Effect," Met. Mater., VoL 4, No. 3, pp. 311-314, 1998.
- Jeong, S. H., Lee, S. H., Kim, G. H., Seo, H. J. and Kim, T. H., "Computer Simulation of U-channel for Under-rail Roll Forming using Rigid-plastic Finite Element Methods," J. Mater. Process. Technol., Vol. 201, No. 1-3, pp. 118-122, 2008. https://doi.org/10.1016/j.jmatprotec.2007.11.130
- Siti Nadiah binti Mohd, S., Takuo, N. and Hiroshi, O., "Residual Stress Around Cut End of Hat Steel Channel by Roll Forming," Procedia Eng., Vol. 81, pp. 239-244, 2014. https://doi.org/10.1016/j.proeng.2014.09.157
- Chang, K. H., Lee, C. H. and Shin, Y. E., "A Study on the High Temperature Tensile Property and the Characteristics of Residual Stress in Welds of High Strength Steels," J. Korea Weld. Join. Soc., Vol. 22, No. 4, pp. 50-58, 2004.
- Chang, K. H., Jung, G. C., Stiemer, S. and Loewen, N., "Dynamic Hysteretic Characteristics of High-Strength Steels (POSTEN60, POSTEN80) and Application of a Dynamic Hysteresis Model to FE Analysis" J. Mater. Civ. Eng., Vol. 25, No. 10, pp. 1549-1557, 2013. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000629
- Chang, K. H. and Lee, C. H., "Characteristics of High Temperature Tensile Properties and Residual Stresses in Weldments of High Strength Steels" Mater. Trans., Vol. 47, No. 2, pp. 348-354, 2006. https://doi.org/10.2320/matertrans.47.348
- Kwon, S. C., "A Study on Roll Forming of Automotive Body Channels," A Master's Thesis, Institute Of e-Vehicle Technology University Of The Ulsan, Republic of Korea, 2009.
Cited by
- CNG용 Type 4 하이브리드 섬유 복합재 용기 개발에 대한 연구 vol.16, pp.4, 2016, https://doi.org/10.14775/ksmpe.2017.16.4.097