Browse > Article
http://dx.doi.org/10.14775/ksmpe.2016.15.1.042

A Study of Spring-back Effect According to the Number of Roll Passes in the Roll Forming Process  

Kim, Dong-Hong (Department of Mechanical Engineering, JEJU NATIONAL UNIV.)
Zhang, Ya (Department of Mechanical Engineering, JEJU NATIONAL UNIV.)
Jung, Dong-Won (Department of Mechanical Engineering, JEJU NATIONAL UNIV.)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.15, no.1, 2016 , pp. 42-49 More about this Journal
Abstract
This study was analyed V-bending in order to analyze the spring-back phenomenon in the roll forming process. The material of forming sheet used in the roll forming process is high tension steel and the product name of sheet material is POSTEN 60. The most important variable is the number of roll passes (3-Pass, 4-Pass, 5-Pass, 6-Pass and 10-Pass) and other roll forming process variables were fixed. To determine the characteristics of the tension and compression, the forming sheet was analyzed by dividing the layer (Upper and Bottom) in the thickness direction from the center line. The results of FEM simulation analysis was derived to von-mises stress equivalent strain, and the spring-back value was calculated according to the final forming shape. The more number of the roll pass, von-mises stress and equivalent strain value of forming sheet were lowed. Also, spring-back values tended to decrease. The results of this study can be utilized for prediction and trend of spring-back value in the roll forming process applied to high tension steel sheet. So, development time and cost of the roll forming process is expected to be reduced.
Keywords
Roll Forming Process; Spring-back; Finite Element Method; Roll Pass; High Tension Steel;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Sweeney, K. and Grunewald, U., "The application of roll forming for automotive structural parts," J. Mater. Process. Technol., Vol. 132, No. 1-3, pp. 9-15, 2003.   DOI
2 Son, H. J., Kim, S. Y., Oh, B. S. and Kim, K. S., "Development of Vehicle Door Side Impact Beam with High Tensile Steel using Roll Forming Process," J. Korean Soc. Manuf. Process Eng., Vol. 11, No. 6, pp. 82-87, 2012.
3 Park, S. P. and Kwon, Y. J., "The Study of Roll-forming Technology for UHSS Hydroformed Parts," Trans. Korean Soc. Automot. Eng., Vol. 23, No. 1, pp. 41-48, 2015.   DOI
4 Kim, D. H. and Jung, D. W., "Roll Forming Analysis for High Strength Steel Bumper Process," J. Korean Soc. Precis. Eng., Vol. 30, No. 8, pp. 797-801, 2013.   DOI
5 Uemori, T., Okada, T. and Yoshida, F., "Simulation of Springback in V-bending Process by Elasto-Plastic Finite Element Method with Consideration of Bauschinger Effect," Met. Mater., VoL 4, No. 3, pp. 311-314, 1998.
6 Jeong, S. H., Lee, S. H., Kim, G. H., Seo, H. J. and Kim, T. H., "Computer Simulation of U-channel for Under-rail Roll Forming using Rigid-plastic Finite Element Methods," J. Mater. Process. Technol., Vol. 201, No. 1-3, pp. 118-122, 2008.   DOI
7 Siti Nadiah binti Mohd, S., Takuo, N. and Hiroshi, O., "Residual Stress Around Cut End of Hat Steel Channel by Roll Forming," Procedia Eng., Vol. 81, pp. 239-244, 2014.   DOI
8 Chang, K. H., Lee, C. H. and Shin, Y. E., "A Study on the High Temperature Tensile Property and the Characteristics of Residual Stress in Welds of High Strength Steels," J. Korea Weld. Join. Soc., Vol. 22, No. 4, pp. 50-58, 2004.
9 Chang, K. H., Jung, G. C., Stiemer, S. and Loewen, N., "Dynamic Hysteretic Characteristics of High-Strength Steels (POSTEN60, POSTEN80) and Application of a Dynamic Hysteresis Model to FE Analysis" J. Mater. Civ. Eng., Vol. 25, No. 10, pp. 1549-1557, 2013.   DOI
10 Chang, K. H. and Lee, C. H., "Characteristics of High Temperature Tensile Properties and Residual Stresses in Weldments of High Strength Steels" Mater. Trans., Vol. 47, No. 2, pp. 348-354, 2006.   DOI
11 Kwon, S. C., "A Study on Roll Forming of Automotive Body Channels," A Master's Thesis, Institute Of e-Vehicle Technology University Of The Ulsan, Republic of Korea, 2009.