DOI QR코드

DOI QR Code

Effects of Sintering Atmosphere on Piezoelectric Properties of 0.75BF-0.25BT Ceramic

  • Kim, Dae Su (Department of Materials Science and Engineering, Hoseo University) ;
  • Kim, Jeong Seog (Department of Digital Display Engineering, Hoseo University) ;
  • Cheon, Chae Il (Department of Materials Science and Engineering, Hoseo University)
  • 투고 : 2016.02.15
  • 심사 : 2016.03.16
  • 발행 : 2016.03.31

초록

0.75BF-0.25BT ceramics were prepared by sintering at $980-1040^{\circ}C$ in air or under atmosphere powder. A sample with 1 mole %-excess $Bi_2O_3$ was also prepared to compensate for $Bi_2O_3$-evaporation. Physical and piezoelectric properties of these three samples were compared. When the sintering temperature increased from $980^{\circ}C$ to $1040^{\circ}C$, the density of the sample sintered in air decreased continuously due to Bi-evaporation. Due to the suppression of Bi-evaporation, the sample sintered under atmosphere powder had a higher density at sintering temperatures above $1000^{\circ}C$ than did the sample sintered in air. The addition of 1 mole %-excess $Bi_2O_3$ successfully compensated for Bi-evaporation and kept the density at the higher value until $1020^{\circ}C$. Grain size increased continuously when the sintering temperature increased from 980 to $1040^{\circ}C$, irrespective of the sintering atmosphere. When the sintering temperature increased, the piezoelectric constant ($d_{33}$) and the electromechanical coupling factor ($k_p$) increased for all samples. The sample with 1 mole % excess-$Bi_2O_3$ showed the highest density and the best piezoelectric properties at sintering temperature of $1020^{\circ}C$.

키워드

참고문헌

  1. B. Jaffe, W. R. Cook, and H. Jaffe, Piezoelectric Ceramics; Academic Press, New York, 1971.
  2. J. Rodel, K. G. Webber, R. Dittmer, W. Jo, M. Kimurac, and D. Damjanovic, "Transferring Lead-Free Piezoelectric Ceramics into Application," J. Eur. Ceram. Soc., 35 [6] 1659-81 (2015). https://doi.org/10.1016/j.jeurceramsoc.2014.12.013
  3. J.-F. Li, K. Wang, F.-Y. Zhu, L.-Q. Cheng and F.-Z. Yao, "(K,Na)$NbO_3$-Based Lead-Free Piezoceramics: Fundamental Aspects, Processing Technologies, and Remaining Challenges," J. Am. Ceram. Soc., 96 [12] 3677-96 (2013). https://doi.org/10.1111/jace.12715
  4. J. Roedel, W. Jo, K. T. P. Seifert, E.-M. Anton, and T. Granzow, "Perspective on the Development of Lead-Free Piezoceramics," J. Am. Ceram. Soc., 92 [6] 1153-77 (2009). https://doi.org/10.1111/j.1551-2916.2009.03061.x
  5. W. Jo, R. Dittmer, M. Acosta, J. Zang, C. Groh, E. Sapper, K. Wang, and J. Rodel, "Giant Electric-Field-Induced Strains in Lead-Free Ceramics for Actuator Applications -Status and Perspective," J. Electroceram., 29 [1] 71-93 (2012). https://doi.org/10.1007/s10832-012-9742-3
  6. P. K. Panda, "Review: Environmental Friendly Lead-Free Piezoelectric Materials," J. Mater. Sci., 44 [19] 5049-62 (2009). https://doi.org/10.1007/s10853-009-3643-0
  7. T. Takenaka, H. Nagata, and Y. Hiruma, "Current Developments and Prospective of Lead-Free Piezoelectric Ceramics," Jpn. J. Appl. Phys., 47 [5S] 3787-801 (2008). https://doi.org/10.1143/JJAP.47.3787
  8. T. R. Shrout and S. J. Zhang, "Lead-Free Piezoelectric Ceramics: Alternatives for PZT?," J. Electroceram., 19 [1] 111-24 (2007).
  9. Y. Saito, H. Takao, T. Tani, T. Nonoyama, K. Takatori, T. Homma, T. Nagaya, and M. Nakamura, "Lead-Free Piezoceramics," Nature, 432 [7013] 84-7 (2004). https://doi.org/10.1038/nature03028
  10. S. O. Leontsev and R. E. Eitel, "Dielectric and Piezoelectric Properties in Mn-Modified (1-x)$BiFeO_3$-$xBaTiO_3$ Ceramics," J. Am. Ceram. Soc., 92 [12] 2957-61 (2009). https://doi.org/10.1111/j.1551-2916.2009.03313.x
  11. J. Chen and J. Cheng, "Enhanced Thermal Stability of Lead-Free High Temperature $0.75BiFeO_3$-$0.25BaTiO_3$ Ceramics with Excess Bi Content," J. Alloy. Compd., 589 115-19 (2014). https://doi.org/10.1016/j.jallcom.2013.11.169
  12. H. Yang, C. Zhou, X. Liu, Q. Zhou, G. Chen, W. Li, and H. Wang, "Piezoelectric Properties and Temperature Stabilities of Mn- and Cu-Modified $BiFeO_3$-$BaTiO_3$ High Temperature Ceramics," J. Eur. Ceram. Soc., 33 [6] 1177-83 (2013). https://doi.org/10.1016/j.jeurceramsoc.2012.11.019
  13. Y. Wan, Y. Li, Q. Li, W. Zhou, Q. Zheng, X. Wu, C. Xu, B. Zhu, and D. Lin, "Microstructure, Ferroelectric, Piezoelectric, and Ferromagnetic Properties of Sc-Modified $BiFeO_3$-$BaTiO_3$ Multiferroic Ceramics with $MnO_2$ Addition," J. Am. Ceram. Soc., 97 [6] 1809-18 (2014). https://doi.org/10.1111/jace.12827
  14. D. J. Kim, M. H. Lee, J. S. Park, M.-H. Kim, T. K. Song, W.-J. Kim, K. W. Jang, S. S. Kim, and D. Do, "Effects of Sintering Temperature on the Electric Properties of Mn-modified $BiFeO_3$-$BaTiO_3$ Bulk Ceramics," J. Kor. Phys. Soc., 66 [7] 1115-19 (2015). https://doi.org/10.3938/jkps.66.1115
  15. X.-H. Liu, Z. Xu, S.-B. Qu, X.-Y. Wei, and J.-L. Chen, "Ferroelectric and Ferromagnetic Properties of Mn-Doped $0.7BiFeO_3$-$0.3BaTiO_3$ Solid Solution," Ceram. Int., 34 [4] 797-801 (2008). https://doi.org/10.1016/j.ceramint.2007.09.029
  16. Y. J. Lee and J. S. Kim, S. H. Han, H.-W. Kang, and H.-G. Lee, and C. I. Cheon, "Effect of Sintering Temperature on the Piezoelectric Properties in $BiFeO_3$-$BaTiO_3$ Ceramics," J. Kor. Phys. Soc., 61 [6] 947-50 (2012). https://doi.org/10.3938/jkps.61.947
  17. Y. Wei, X. Wang, J. Zhu, X. Wang, and J. Jia, "Dielectric, Ferroelectric, and Piezoelectric Properties of $BiFeO_3$-$BaTiO_3$ Ceramics," J. Am. Ceram. Soc., 96 [10] 3163-68 (2013). https://doi.org/10.1111/jace.12475
  18. M. M. Kumar, A. Srinivas, and S. V. Suryanarayana, "Structure Property Relations in $BiFeO_3$/$BaTiO_3$ Solid Solutions," J. Appl. Phys., 87 855-62 (2000). https://doi.org/10.1063/1.371953
  19. C. A. Randall, N. Kim, J.-P. Kucera, W. Cao, and T. R. Shrout, "Intrinsic and Extrinsic Size Effects in Fine-Grained Morphotropic-Phase-Boundary Lead Zirconate Titanate Ceramics," J. Am. Ceram. Soc., 81 [3] 677-88 (1998).

피인용 문헌

  1. ceramics vol.109, pp.20, 2016, https://doi.org/10.1063/1.4967742
  2. Enhanced Piezoelectric Properties of (1−x)[0.675BiFeO3−0.325BaTiO3]−xLiTaO3 Ternary System by Air-Quenching vol.28, pp.9, 2018, https://doi.org/10.3740/MRSK.2018.28.9.489