DOI QR코드

DOI QR Code

저궤도 위성용 S대역 수신기의 개발

Development of the S-band receiver for LEO satellite

  • 투고 : 2015.05.21
  • 심사 : 2016.02.03
  • 발행 : 2016.03.01

초록

저궤도 위성용 S대역 수신기 EM 모델을 개발 하였다. 복조기는 복조 방식의 확장성을 고려하여 복조 기능을 FPGA를 사용하여 구현하였으며 제작된 수신기는 RF 단과 디지털 복조기 그리고 전원부로 구성되고 운용상 발생되는 주파수 편이 보상을 위한 도플러 추적 기능을 가진다. 측정결과 수신기의 BER은 -110dBm의 RF입력전력에서 $1.0{\times}10^{-6}$로 측정 되었으며, 중심 주파수를 기준으로 ${\pm}100KHz$의 주파수 추적기능을 가진다. 요구된 환경 온도 테스트를 완료하였으며, TID 테스트 결과 기준치인 10Krad를 만족한다.

The S-band receiver for Low Earth Orbit satellite is designed and fabricated as engineering model. Demodulator is implemented by using FPGA for extension of demodulator method. The receiver consists of RF Block, Digital demodulator and Power stage and has a Doppler tracking function to compensate a frequency shift that occur on the operation. The measured results of fabricated receiver show BER of less than $1.0{\times}10^{-6}$ at -110dBm RF input power and equipped a frequency tracking of ${\pm}100KHz$ relative to the center frequency. TID test was satisfied with the results of the test criterion is 10krad.

키워드

참고문헌

  1. CCSDS401-B
  2. ECSS-E-ST-50-05C
  3. G.Maral, M. Bousquet, Satellite Communication Systems 3/e, System, Techniques and Technology, John Wiley & Sons Ltd, 1998.