References
- D.D. DiBitonto, P.T. Eubank et al., "Theoretical models of the electrical discharge machining process. I. A. simple cathode erosion model," Journal of Applied Physics, Vol. 66, No. 9, pp. 4095-4103, 1989. https://doi.org/10.1063/1.343994
- Song, K. Y., "DEVELOPMENT OF STRIP EDM," A Thesis for a Doctorate, Seoul National University, Republic of Korea, 2012
- H.C. Tsai, B.H. Yan, F.Y. Huang, "EDM performance of Cr/Cu-based composite electrodes," International Journal of Machine Tools and Manufacture, Vol. 43, No. 3, pp. 245-252, 2003. https://doi.org/10.1016/S0890-6955(02)00238-9
- Kim, C. H., "Improvement of the ED-Drilling Machinability using Multi-hole Electrodes," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 5, pp. 88-93, 2012.
- Krishna, K., S., Anand, S., S., Sanjay, A., "Experimental investigation into the micro-EDM characteristics of conductive SiC," Journal of Ceramics International,Vol. 42 No. 1, pp. 1597-1610, 2016. https://doi.org/10.1016/j.ceramint.2015.09.111
- Kwon, W. T., Kim, Y. C., "Process Optimization for Productivity Improvement during EDM machining of a micro-hole," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 21 No.4. pp. 556-562, 2012. https://doi.org/10.7735/ksmte.2012.21.4.556
- Lee, C. S., "A Method of Hole Pass-Through Evaluation for EDM Drilling," Journal of the Korean Institute of Industrial Engineers, Vol. 38, No. 3, pp. 220-226, September 2012. https://doi.org/10.7232/JKIIE.2012.38.3.220
- N. M. Kumar, S. S. Kumaran, L. A. Kumaraswamidhas, "An investigation of mechanical properties and material removal rate, tool wear rate in EDM machining process of AL2618 alloy reinforced with Si3N4, AlN and ZrB2 composites," Journal of Alloys and Compounds, Vol. 650, pp. 318-327, 2015. https://doi.org/10.1016/j.jallcom.2015.07.292
- J. C. Ferreira, "A study of die helical thread cavity surface finish made by Cu-W electrodes with planetary EDM," International Journal of Advanced Manufacturing Technology, Vol. 34, No. 11-12, pp. 1120-1132, 2007. https://doi.org/10.1007/s00170-006-0687-z
- Kim, B., H., "Micro Hole Machining Using MEDM with Screw-Type Electrode," Master Thesis, Seoul University 1999.
- Ryu, Ch. W., Choi, S. D., "Characteristics of Surface Roughness Based on Wire Vibration and Wire-cut Electric Discharge Machining of Aluminum Alloy 6061 (I)" Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 100-107, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.100
- Ryu, Ch. W., Choi, S. D., "Characteristics of Surface Roughness According to Wire VibrationWire-cut Electric Discharge Machining of Aluminum Alloy 6061(II)" Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 100-107, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.100
Cited by
- Electron Discharge Machining (EDM) and Hole EDM of Cold Heat-treated Tool Steel Molds (STD11) by using Cu Electrodes vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.076