DOI QR코드

DOI QR Code

에폭시 알루미나 멀티-콤포지트의 기계적 특성연구

Mechanical Properties of Epoxy Alumina Multi-Composites

  • 박재준 (중부대학교 전기전자공학과)
  • Park, Jae-Jun (Department of Electrical Elecrtonic Engineering, Joongbu University)
  • 투고 : 2016.10.15
  • 심사 : 2016.11.23
  • 발행 : 2016.12.01

초록

In order to develop an electrical insulation material for gas GIS (insulation switch gear) spacer, 4 types of epoxy/micro-alumina (40, 50, 60, 70 wt%) composites and 9 types of epoxy/nano-alumina (1, 3, 5 g)/micro-alumina (40, 50, 60, 70 wt%) composites were prepared and tensile test was carried out. In here, nano-alumina was previously surface-treated with GDE (glycerol diglycidyl ether). As micro-alumina and GDE-treated nano-alumina contents increased, tensile strength increased and the highest value was shown in the system with 3 g GDE-treated nano-alumina.

키워드

참고문헌

  1. T. W. Dakin, IEEE Transaction on Dielectrics and Electrical Insulation, EI-9, 121 (1974). [DOI: https://doi.org/10.1109/TEI.1974.299321]
  2. J. Sato, O. Sakaguchi, N. Kubota, S. Makishima, S. Kinoshita, T. Shioiri, T. Yoshida, M. Miyagawa, M. Homma, and E. Kaneko, Proc. Transmission and Distribution Conference and Exhibition Asia Pacific (Yokohama, Japan, 2002) p.1791. [DOI: https://doi.org/10.1109/TDC. 2002.1177727]
  3. T. Imai, F. Sawa, T. Nakano, T. Ozaki, T. Shimizu, M. Kozako, and T. Tanaka, IEEE Conf. Electr. Insul. Dielectr., 13, 319 (2006). [DOI: https://doi.org/10.1109/TDEI.2006.1624276]
  4. T. Imai, F. Sawa, T. Yoshimitsu, T. Ozaki, and T. Shimizu, IEEE Conf. Electr. Insul. Dielectr. Phenomena (CEIDP), 402 (2004).
  5. J. J. Park, Trans. KIEE., 65 (2016).
  6. T. Tanaka, M. Kozako, N. Fuse, and Y. Ohki, IEEE Transaction on Dielectrics and Electrical Insulation, 12, 669 (2005). [DOI: https://doi.org/10.1109/TDEI.2005.1511092]
  7. G. Tsagaropoulos and A. Eisenberg, Macromolecules, 28, 6067 (1995). [DOI: https://doi.org/10.1021/ma00122a011]
  8. Z. Farhadinejad, M. Ehsani, S. Moemenbellah, S.M.B. Alavi, M.M.S. Shirazi, and H. Borsi, IEEE Transactions on Nanotechnology, 11, 957 (2012). [DOI: https://doi.org/10.1109/TNANO.2012.2209458]
  9. R. Sarathi, R. K. Sahu, and P. Rajeshkumar, Mater. Sci. Eng. A, 445, 567 (2007). [DOI: https://doi.org/10.1016/j.msea.2006.09.077]
  10. H. Shi, N. Gao, H. Jin, and C. Wang, Mater. Sci. Forum, 658, 463 (2010). [DOI: https://doi.org/10.4028/www.scientific.net/MSF.658.463]
  11. A. Omrani, L. C. Simon, and A. A. Rostami, Mat. Chem. Phys., 114, 145 (2009). [DOI: https://doi.org/10.1016/j.matchemphys.2008.08.090]
  12. Z. Ahmad, M. P. Ansell, and D. Smedley, Int. J. Eng. Technol., 10, 32 (2010).
  13. S. A. Meguid and Y. Sun, Mater. Design, 25, 289 (2004). [DOI: https://doi.org/10.1016/j.matdes.2003.10.018]
  14. R. R. Patel and N. Gupta, Proc. 15th Nat. Power Syst. Conf. (Mumbai, India, 2008) p. 361.
  15. Q. Wang, G. Chen, and A. S. Alghamdi, Proc. 10th IEEE Int. Conf. Solid Dielectr. (Potsdam, Germany, 2010) p. 263.