참고문헌
- Choi, G.S. and Chang, S.H., 2014, "Review of Critical Heat Flux Correlations for Upward Flow in a Vertical Thin Rectangular Channel," Trans. Korean Nuclear Soc. Spring Meeting.
- Chang, S.H., Baek, W.P., 1997, Critical Heat Flux(Korean), Chung Moon Gak, pp. 117-118.
- Whalley, P.B., 1987, Boiling, Condensation, and Gas- Liquid Flow, Clarendon Press., Oxford, pp. 181-183.
- Levy, S., Healzer, J.M. and Abdollahian, D., 1981, "Prediction of Critical Heat Flux in Vertical Pipe Flow," Nuclear Engineering and Design, Vol. 65, pp. 131-140. https://doi.org/10.1016/0029-5493(81)90126-6
- Wurtz, J., 1978, "An Experimental and Theoretical Investigation of Annular Steam-Water Flow in Tubes and Annuli at 30-90 bar," Riso Report No. 372, Riso National Lab.
- Saito, T., Hughes, E.D. and Carbon, M.W., 1978, "Multi-fluid Modeling of Annular Two-phase Flow," Nuclear Engineering and Design, Vol. 50, pp. 225-271. https://doi.org/10.1016/0029-5493(78)90041-9
- Sugawara, S. and Miyamoto, Y., 1990, "FIDAS: Detailed Subchannel Analysis Code based on the Three-fluid and Three-field Model," Nuclear Engineering and Design, Vol. 120, pp. 147-161. https://doi.org/10.1016/0029-5493(90)90369-9
- El-Shanawany, M., El-Shirbini, A.A and Murgatroyd, W., 1978, "A Model for Predicting the Dry-out Position for Annular Flow in a Uniformly Heated Vertical Tube," International Journal of Heat and Mass Transfer, Vol. 21, pp. 529-536. https://doi.org/10.1016/0017-9310(78)90048-0
- Mishima, K. and Nishihara, H., 1989, "Dryout Model for Critical Heat Flux at High and Intermediate Quality Region," Annu. Rep., Res. Reactor Inst. Kyoto Univ., Vol. 22, pp. 1-13.
- Celata, G.P., Mishima, K. and Zummo, G., 2001, "Critical Heat Flux Prediction for Saturated Flow Boiling of Water in Vertical Tubes," International Journal of Heat and Mass Transfer, Vol. 44, pp. 4323-4331. https://doi.org/10.1016/S0017-9310(01)00072-2
- Chandraker, D.K., Vijayan, P.K., Sinha, R.K. and Aritomi, M., 2011, "Phenomenological Prediction of CHF under Boiling Water Reactor (BWR) Conditions," Progress in Nuclear Energy, Vol. 53, pp. 874-880. https://doi.org/10.1016/j.pnucene.2011.02.013
- Okawa, T., Kotani, A., Kataoka, I and Naito, M., 2003, "Prediction of Critical Heat Flux in Annular Flow using a Film Flow Model," Journal of Nuclear Science and Technology, Vol. 40, No. 6, pp. 388-396. https://doi.org/10.1080/18811248.2003.9715370
- Hewitt, G.F. and Roberts, D.N., 1969, "Studies of Two-phase Flow Patterns by Simultaneous X-ray and Flash Photography," AERE-M-2159, UK AEA.
- Wallis, G.B., 1969, One-dimensional Two-phase Flow, McGraw-Hill, USA.
- Collier, J.G and Thome J.R., 1996, Convective Boiling and Condensation, 3rd edition, Clarendon Press, Oxford.
- Taitel, Y., Bornea, D. and Dukler, A.E., 1980, "Modelling Flow Pattern Transitions for Steady Upward Gas-Liquid Flow in Vertical Tubes," AlChE Journal, Vol. 26, No. 3, pp. 345-354. https://doi.org/10.1002/aic.690260304
- Mishima, K. and Ishii, M., 1984, "Flow Regime Transition Criteria for Upward Two-phase Flow in Vertical Tubes," International Journal of Heat and Mass Transfer, Vol. 27, No. 5, pp. 723-737. https://doi.org/10.1016/0017-9310(84)90142-X
- Saha, P. and Zuber, N., 1974, "Point of Net Vapor Generation and Vapor Void Fraction in Subcooled Boiling," Proceedings of 5th International Heat Transfer Conference, Tokyo.
- Katto, Y., 1984, "Prediction of Critical Heat Flux for Annular Flow in Tubes taking into account the Critical Liquid Film Thickness Concept," International Journal of Heat and Mass Transfer, Vol. 27, No. 6, pp. 883-891. https://doi.org/10.1016/0017-9310(84)90009-7
- Okawa, T., Kitahara, T., Yoshida, K., Matsumoto, T. and Kataoka, I., 2002, "New Entrainment Rate Correlation in Annular Two-phase Flow Applicable to Wide Range of Flow Condition," International Journal of Heat and Mass Transfer, Vol. 45, pp. 87-98. https://doi.org/10.1016/S0017-9310(01)00111-9
- Ishii, M. and Grolmes, M.A., 1975, "Inception Criteria for Droplet Entrainment in Two-phase Concurrent Film Flow," AlChE Journal, Vol. 21, No. 2, pp. 308-318. https://doi.org/10.1002/aic.690210212
- Okawa, T., Kotani, A., Kataoka, I. and Naitoh, M., 2004, "Prediction of the Critical Heat Flux in Annular Regime in Various Vertical Channels," Nuclear Engineering and Design, Vol. 229, pp. 223-236. https://doi.org/10.1016/j.nucengdes.2004.01.005
- Ueda, T., Inoue, M. and Nagatome, S., 1981, "Critical Heat Flux and Droplet Entrainment Rate in Boiling of Falling Liquid Films," International Journal of Heat and Mass Transfer, Vol. 24., No. 7, pp. 1257-1266. https://doi.org/10.1016/0017-9310(81)90175-7
- Ueda, T. and Isayama, Y., 1981, "Critical Heat Flux and Exit Film Flow Rate in a Flow Boiling System," International Journal of Heat and Mass Transfer, Vol. 24, No. 7, pp. 1267-1276. https://doi.org/10.1016/0017-9310(81)90176-9
- Fore, L.B., Beus, S.G. and Bauer, R.C., 2000, "Interfacial Friction in Gas-Liquid Annular Flow: Analogies to Full and Transition Roughness," International Journal of Multiphase Flow, Vol. 26, pp. 1755-1769. https://doi.org/10.1016/S0301-9322(99)00114-7
- Hibiki, T. and Mishima, K., 2001, "Flow Regime Transition Criteria for Upward Two-phase flow in Vertical Narrow Rectangular Channels," Nuclear Engineering and Design, Vol. 203, pp. 117-131. https://doi.org/10.1016/S0029-5493(00)00306-X
- DeBortoli, R.A., Green, S.J., LeTournea, B.W., Troy, M. and Weiss, A., 1958, Forced-Convection Heat Transfer Burnout Studies for Water in Rectangular Channels and Round Tubes at Pressures Above 500 psia, WAPD-188, Westinghouse Electric Corporation.
- Troy, M., 1958, Upflow Burnout Data for Water at 2000, 1200, 800 and 600 psia in Vertical 0.070in.x2.25in.x72in. Long Stainless Steel Rectangular Channels, WAPD-TH-408, Westinghouse Electric Corporation.
- Jacket, H.S., Roatry, J.D. and Zerbe, J.E., 1958, "Investigation of Burnout Heat Flux in Rectangular Channels at 2000 psia," Trans. of the ASME, Journal of Heat Transfer, Vol. 80, No. 2, pp. 391-401.
- Tippets, F.E., 1962, "Critical Heat Flux and Flow Pattern Characteristics of High Pressure Boiling Water in Forced Convection," GEAP-3766, General Electric Company.