한국군사과학기술학회지 (Journal of the Korea Institute of Military Science and Technology)

  • 제18권5호
  • /
  • Pages.485-491
  • /
  • 2015
  • /
  • 1598-9127(pISSN)
  • /
  • 2636-0640(eISSN)
한국군사과학기술학회 (The Korea Institute of Military Science and Technology)
권호 표지
DOI QR코드

DOI QR Code

자주포 발전기 스플라인 축 내구성 향상을 위한 최적 설계 기법

The Optimal Design Technique for Improving Durability of Spline Shaft of the Self Propelled Artillery' Generator

  • 김병호 (국방기술품질원 창원센터) ;
  • 강현제 (국방기술품질원 창원센터) ;
  • 박영일 (국방기술품질원 창원센터) ;
  • 서재현 (국방기술품질원 창원센터)
  • Kim, Byeong Ho (Changwon Center, Defense Agency for Technology and Quality) ;
  • Kang, Hyen Jae (Changwon Center, Defense Agency for Technology and Quality) ;
  • Park, Young Il (Changwon Center, Defense Agency for Technology and Quality) ;
  • Seo, Jae Hyun (Changwon Center, Defense Agency for Technology and Quality)
  • 투고 : 2015.05.21
  • 심사 : 2015.09.04
  • 발행 : 2015.10.05
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, the experimental and analytical investigation on structural integrity evaluation of spline shaft of self propelled artillery' generator were carried out. For this work, macro and microstructure fractography of spline shaft were observed. According to the results of the structure analysis and simulation, the shaft was redesigned and optimized. To improve the stiffness and shear stress, the material was changed from the SNCM220 to SNCM439 and surface roughness and protective coating treatment are changed to increase the stress relaxation, respectively. From the result of the torsion test of shaft and accelerated life test of generator, the shaft of a SNCM439 with heat-treatment(Q/T) and electroless nickel plating was superior quality reliability and durability than the others. Therefore, modeling and simulation corresponded well with the experimental result and structural safety was confirmed by generator performing.

키워드

참고문헌

  1. Jung J. W., Jung U. H., Kim C. S., Yu Y. S., Park K. C. and Park K. C., "Structural Integrity Evaluation for Crane Bracket of Armored Recovery Vehicle," Journal of the Korea Institute of Military Science and Technology, Vol. 16, No. 5, pp. 653-658, 2013. https://doi.org/10.9766/KIMST.2013.16.5.653
  2. DTaQ, "A Report on Durability Improvement for Spline Shaft of Alternator of K9," 2011
  3. Chu S. H and Liu C., "Finite Element Simulation of Fracture Toughness Test," Trans. Korean Soc. Mech. Eng. A, Vol. 37, No. 4, pp. 491-496, 2013. https://doi.org/10.3795/KSME-A.2013.37.4.491
  4. Chu S. J. and Liu C., "Determination of True Stress-True Strain Curves from Tensile Tests with the Aid of Finite Element Analysis Simulation," Trans. Korean Soc. Mech. Eng. A, Vol. 35, No. 1, pp. 25-31, 2011. https://doi.org/10.3795/KSME-A.2011.35.1.025
  5. ASTM A370 "Standard Test Methods and Definitions for Mechanical Testing of Steel Products," 2014.