Browse > Article
http://dx.doi.org/10.9766/KIMST.2015.18.5.485

The Optimal Design Technique for Improving Durability of Spline Shaft of the Self Propelled Artillery' Generator  

Kim, Byeong Ho (Changwon Center, Defense Agency for Technology and Quality)
Kang, Hyen Jae (Changwon Center, Defense Agency for Technology and Quality)
Park, Young Il (Changwon Center, Defense Agency for Technology and Quality)
Seo, Jae Hyun (Changwon Center, Defense Agency for Technology and Quality)
Publication Information
Journal of the Korea Institute of Military Science and Technology / v.18, no.5, 2015 , pp. 485-491 More about this Journal
Abstract
In this study, the experimental and analytical investigation on structural integrity evaluation of spline shaft of self propelled artillery' generator were carried out. For this work, macro and microstructure fractography of spline shaft were observed. According to the results of the structure analysis and simulation, the shaft was redesigned and optimized. To improve the stiffness and shear stress, the material was changed from the SNCM220 to SNCM439 and surface roughness and protective coating treatment are changed to increase the stress relaxation, respectively. From the result of the torsion test of shaft and accelerated life test of generator, the shaft of a SNCM439 with heat-treatment(Q/T) and electroless nickel plating was superior quality reliability and durability than the others. Therefore, modeling and simulation corresponded well with the experimental result and structural safety was confirmed by generator performing.
Keywords
Self Propelled Artillery; Spline Shaft; Structure Analysis; Shear Stress;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Jung J. W., Jung U. H., Kim C. S., Yu Y. S., Park K. C. and Park K. C., "Structural Integrity Evaluation for Crane Bracket of Armored Recovery Vehicle," Journal of the Korea Institute of Military Science and Technology, Vol. 16, No. 5, pp. 653-658, 2013.   DOI
2 DTaQ, "A Report on Durability Improvement for Spline Shaft of Alternator of K9," 2011
3 Chu S. H and Liu C., "Finite Element Simulation of Fracture Toughness Test," Trans. Korean Soc. Mech. Eng. A, Vol. 37, No. 4, pp. 491-496, 2013.   DOI
4 Chu S. J. and Liu C., "Determination of True Stress-True Strain Curves from Tensile Tests with the Aid of Finite Element Analysis Simulation," Trans. Korean Soc. Mech. Eng. A, Vol. 35, No. 1, pp. 25-31, 2011.   DOI   ScienceOn
5 ASTM A370 "Standard Test Methods and Definitions for Mechanical Testing of Steel Products," 2014.