References
- Wang, H. J. and van Blitterswijk, C. A., 2010, "The Role of Three-Dimensional Polymeric Scaffold Configuration on the Uniformity of Connective Tissue Formation by Adipose Stromal Cells," BioMaterials, Vol. 31, pp. 4322-4329. https://doi.org/10.1016/j.biomaterials.2010.02.008
- Thavornyutikarn, B., Chantarapanich, N., Sitthiseripratip, K., Thouas, G. and Chen, Q., 2014, "Bone Tissue Engineering Scaffolding: Computer- Aided Scaffolding Techniques," Prog. Biomater., Vol. 3, No. 26, pp. 1-42.
- Lu, L., Zhang, Q., Wootton, D., Chiou, R., Li, D., Lu, B., Lelkes, P. and Zhou, J., 2012, "Biocompatibility and Biodegradation Studies of PCL/TCP Bone Tissue Scaffold Fabricated by Structural Porogen Method," J. Mater. Sci: Mater. Med., Vol. 23, pp. 2217-2226. https://doi.org/10.1007/s10856-012-4695-2
- Shor, L., Guceri, S., Chang, R., Gordon, J., Kang, Q., Hartsock, L., An, Y. and Sun, W., 2009, "Precision Extruding Deposition (PED) Fabrication of Polycaprolactone (PCL) Scaffold for Bone Tissue Engineering," Biofabrication, 015003.
- Ha, S. W. and Kim, J. Y., 2014, "Fabrication of Blended PCL/TCP Scaffolds by Mixture Ratio of TCP Using Polymer Deposition System," J. Korean Soc. Precis. Eng., Vol. 31, No. 9, pp. 791-797. https://doi.org/10.7736/KSPE.2014.31.9.791
- Heo, S. J., Kim, S. E., Wei, J., Hyun, Y. T., Yun, H. S., Kim, D. H., Shin, J. W. and Shin, J. W., 2009, "Fabrication and Characterization of Novel Nano- and Micro-HA/PCL Composite Scaffolds Using a Modified Rapid Prototyping Process," J. Biomed Mater. Res. Part A, Vol. 89A, pp. 108-116.
- Park, S. A., Lee, S. H. and Kim, W. D., 2011, "Fabrication of Porous Polycaprolactone/ Hydroxyapatite (PCL/HA) Blend Scaffolds Using a 3D Plotting System for Bone Tissue Engineering," Bioprocess. Eng., Vol. 34, No. 4, pp. 505-513. https://doi.org/10.1007/s00449-010-0499-2
- Kwak, K. A., Jyoti, A. and Song, H. Y., 2014, "In Vitro and in Vivo Studies of Three Dimensional Porous Composites of Biphasic Calcium Phosphate/poly Caprolactone: Effect of Bio- Functionalization for Bone Tissue Engineering," Applied Surface Science, Vol. 301, pp. 307-314. https://doi.org/10.1016/j.apsusc.2014.02.070
- Kim, D. H., Kim, K. L., Chun, H. H., Kim, T. W., Park, H. C. and Yoon S. Y., 2014, "In vitro Biodegradable and Mechanical Performance of Biphasic Calcium Phosphate Porous Scaffolds with Unidirectional Macro-Pore Structure," Ceram. Int., Vol. 40, pp. 8293-8300. https://doi.org/10.1016/j.ceramint.2014.01.031
- Gao, C., Yang, B., Hu, H., Liu, J., Shuai, C. and Peng, S., 2013, "Enhanced Sintering Ability of Biphasic Calcium Phosphate by Polymers Used for Bone Scaffold Fabrication," Mater. Sci. Eng., C, Vo. 33, pp. 3802-3810. https://doi.org/10.1016/j.msec.2013.05.017
- Descamps, M., Biolet, L., Moreau, G., Tricoteaux, A., Lu, J., Leriche, A., Lardot, V. and Cambier, F., 2013, "Processing and Properties of Biphasic Calcium Phosphates Bioceramics Obtained by Pressureless sintering and hot isostatic pressing," J. Eur. Ceram. Soc., Vol. 33, pp. 1263-1270. https://doi.org/10.1016/j.jeurceramsoc.2012.12.020
- Jung, G. I., Kim, J. S., Choi, J. H. and Jun, J. H., 2010, "The Trend and Prospect of Biomaterials in the Biomedical Engineering Field," KIC News, Vol. 13, No. 6, pp. 18-31.
- Sa, M. W. and Kim, J. Y., 2013, "Effect of various blending ratios on the cell characteristics of PCL and PLGA scaffolds fabricated by polymer deposition System," Int. J. Prec. Eng. Manuf., Vol. 14, No. 4, pp. 649-655. https://doi.org/10.1007/s12541-013-0087-x
- Sa, M. W. and Kim, J. Y., 2013, "Design of Multi- Scaffold Fabrication System for Various 3D Scaffolds," J. Mech. Sci. Tech., Vol. 27, No. 10, pp. 2961-2966. https://doi.org/10.1007/s12206-013-0810-7
- Lee, J. S., Cha, H. D., Shim, J. H., Jung, J. W., Kim, J. Y. and Cho, D. W., 2012, "Effect of Pore Architecture and Stacking Direction on Mechanical Properties of Solid Freeform Fabrication-Based Scaffold for Bone Tissue Engineering," J. Biomed. Mater. Res. Part A, Vol. 100A, pp. 1846-1853. https://doi.org/10.1002/jbm.a.34149
- Kim, K. B., Yeatts, A., Dean, D. and J. P. Fisher, 2010, "Stereolithographic Bone Scaffold Design Parameters: Osteogenic Differentiation and Signal Expression," Tissue Eng. B, Vol. 16, pp. 523-539.
- Kim, H. J., Park, I. K., Kim, J. H., Cho, C. S. and Kim, M. S., 2012, "Gas Foaming Fabrication of Porous Biphasic Calcium Phosphate for Bone Regeneration," Tissue Eng. Regen. Med., Vol. 9, No. 2, pp. 63-68. https://doi.org/10.1007/s13770-012-0022-8
- Guo, H., Su, J., Wei, J., Kong, H., Liu, C., 2009, "Biocompatibility and Osteogenicity of Degradable Ca-Deficient Hydroxyapatite Scaffolds from Calcium Phosphate Cement for Bone Tissue Engineering," Acta Biomater., Vol. 5, No. 1, pp. 268-278. https://doi.org/10.1016/j.actbio.2008.07.018
- Tripathi, G. and Basu, B., 2012, "A porous Hydroxyapatite Scaffold for Bone Tissue Engineering: Physico-Mechanical and Biological Evaluations," Ceramics Inter., Vol. 38, No. 1, pp. 341-349. https://doi.org/10.1016/j.ceramint.2011.07.012
- Shim, J. H., Moon, T. S., Yun, M. J., Jeon, Y. C., Jeong C. M., Cho, D. W. and Huh, J. B., 2012, "Stimulation of Healing Within a Rabbit Calvarial Defect by a PCL/PLGA Scaffold Blended with TCP Using Solid Freeform Fabrication Technology," J. Mater. Sci. Mater. Med., Vol. 23, No. 12, p. 2993-3002. https://doi.org/10.1007/s10856-012-4761-9
- Shuai, C., Gao, C. and Nie, Y., Hu, H., Zhou, Y. and Peng, S., 2011, "Structure and Properties of Nano- Hydroxyapatite Scaffolds for Bone Tissue Engineering with a Selective Laser Sintering System," Nanotechnol., Vol. 22, No. 28, 285703.
- Seol, Y. J., Park, D. Y., Park, J. Y., Kim, S. W., Park, S. J. and Cho, D. W., 2013, "A New Method of Fabricating Robust Freeform 3D Ceramic Scaffolds for Bone Tissue Regeneration," Biotechnol. Bioeng., Vol. 110, No. 5, pp. 1444-1455. https://doi.org/10.1002/bit.24794
- Tripathi, G. and Basu, B, 2012, "A Porous Hydroxyapatite Scaffold for Bone Tissue Engineering Physic-Mechanical and Biological Evaluations," Ceram. Inter., Vol. 38, pp. 341-349. https://doi.org/10.1016/j.ceramint.2011.07.012
-
Vorndran, E., Klarner, M., Klammert, U., Grover, L. M., Patel, S., Barralet, J. E. and Gbureck, U., 2008, "3D Powder Printing of
$\beta$ -Tricalcium Phosphate Ceramics Using Different Strategies," Adv. Eng. Mater., Vol. 10, pp. 67-71. https://doi.org/10.1002/adem.200700230