참고문헌
- Korea Concrete Institute, Concrete Design Code and Commentary, Kimoondang Publishing Company, Seoul, Korea, 2012, pp.600.
- Popovics, S., A Numerical Approach to the Complete Stress- Strain Curve of Concrete, Cement and Concrete Research, Vol.3, No.5, 1973, pp.583-599. https://doi.org/10.1016/0008-8846(73)90096-3
- Sargin, M., Stress-Strain Relationship for Concrete and the Analysis of Structural Concrete Sections, Study 4, Solid Mechanics Division; University of Waterloo, Waterloo, Canada, 1971. pp.167.
- Tomaszewicz, A., Betongens Arbeidsdiagram, SINTEF, STF65, A84065, Trondheim, 1984.
- Carreira, D. J. and Chu, K. D., Stress-Strain Relationship for Plain Concrete in Compression, ACI Journal, Proc. Vol.82, No.6, 1985, pp.797-804.
- Collins, M. P., Mitchell, D., and MacGregor, J. G., Structural Design Considerations for High-Strength Concrete, Concrete International : Design and Construction, Vol.15, No.5, 1993, pp.27-34.
- Wee, T. H., Chin, M. S., and Mansur, M. A., Stress-Strain Relationship of High-Strength Concrete in Compression, Journal of Materials in Civil Engineering, Vol.8, No.2, 1996, pp.70-76. https://doi.org/10.1061/(ASCE)0899-1561(1996)8:2(70)
- Wang, P. T., Shah, S. P., and Naaman, A. E., Stress-Strain Curves of Normal and Lightweight Concrete in Compression, ACI Journal Proceedings, Vol.75, No.1978, pp.603-611.
- Comite' Euro-International du Be'ton-Fe'de'ration Internationale de la Pre' contrainte. High Performance Concrete-Recommended Extensions to the Model Code 90, Research Needs. CEB, Bulletin dInformation 228. Lausanne, 1995, pp.60.
- Attard, M. M. and Setunge, S., Stress-strain relationship of confined and unconfined concrete. ACI Materials Journal, Vol.93, No.5, 1996, pp.432-442.
- Benjamin, A., Graybeal, Compressive Behavior of Ultra-High- Performance Fiber-Reinforced Concrete, ACI Materials Journal, Vol.104, No.2, 2007, pp.146-152.
- Ros, M., Material-technological foundation and problems of reinforced concrete (Eidgenossische Materialprfifungs und Versuchsanstalt fur Industrie, Bauwesen and Gewerbe), Bericht No.162 , Zurich, Switzerland, 1950. pp.314.
- Fafitis, A. and Shah, S. P., Predictions of ultimate behavior of confined columns subjected to large deformations, Ibid 82, No.4, 1985, pp.423-433.
- De Nocolo, B., Pani, L., and Pozzo, E., Strain of concrete at peak compressive stress for a wide range of compressive strengths, Materials and Structures, Vol.27, 1994, pp.206-210. https://doi.org/10.1007/BF02473034
- European Commitee for Standardization (CEN), Design of concrete structures-Part 1-1: General rules and rules for buildings. Eurocode 2, Brussels, Belgium. 2004, pp.225.
- Soroushian, P. and Lee, C. H., Constitutive Modeling of Steel Fiber Reinforced Concrete under direct Tension and Compression. Fibre Reinforced Cements and Concretes : Recent Developments. Proceedings of an International Conference held at The University of Wales, Collige of Cardiff, School of Engineering, United Kingdom, Sep, 18-20, 1989.
- Nataraja, M. C., Dhang, N., and Gupta, A. P., Stress-strain curves for steel-fiber reinforced concrete under compression, Cement and Concrete Composites, Vol.21, No.5-6, 1 December 1999, pp.383-390. https://doi.org/10.1016/S0958-9465(99)00021-9
- Dhakal, R. P., Wang, C., and Mander, J. B., Behavior of steel fibre reinforced concrete in compression. Nanjing: International Symposium on Innovation & Sustainability of Structures in Civil Engineering, Nov 2005.
- Korea Concrete Institute, Concrete Design Code and Commentary, Kimoondang Publishing Company, Seoul, Korea, 2007, pp.523.
- ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary, American Concrete Institute, Farmington Hills, Mich., 2011, pp.391.
- Salvador Martinez, Arthur H. Nilson, and Floyd 0. Slate, Spirally Reinforced High-Strength Concrete Columns, ACI Journal, 1984, Vol.81, No.5, pp.431-442.
- Cook, J. E., 10,000 PSI Concrete. Concrete International: Design and Construction, Oct.989, Vol.11, No.10, pp.67-75.
- Ahmad, Shuaib H. and Shah, Surendra P., Complete Triaxial Stress-Strain Curves for Concrete, Proceedings, ASCE, Vol.108, ST4, Apr. 1982, pp.728-742.
- Gao, J., Sun, W., and Morino, K., Mechanical properties of steel fiber reinforced high strength light weight concrete., Cement Concrete Composite, Vol.19, pp.307-313.
- Padmarajaiah, S. K., Influence of fibers on the behavior of high strength concrete in fully/partially prestressed beams : an experimental and analytical study, Ph.D. thesis, Indian Institute of Science, Bangalore, India. 1999.
- KS L 5111, Flow table for use in tests of hydraulic cement, Korean Agency for Technology and Standards, 2007. pp.1-5.
- KS F 2405, Standard Test Method for Compressive Strength of Concrete, Korean Agency for Technology and Standards, 2010. pp.1-16.
- Perera, S. V. T. J., Mutsuyoshi, H., and Asamoto, S., Properties of High-Strength Concrete, Proc. of 12th International Summer Symposium of Japan Society of Civil Engineers (JSCE), Funabashi-Japan, 2010.
- Kaiss, F. Sarsam, Ihsan, A. S., Al-Shaarbaf, Maha, M. S., Ridha, Experimental Investigation of Shear-Critical Reactive Powder Concrete Beams withoutWeb Reinforcement, Eng. &Tech. Journal, Vol.30, No.17, 2012, pp.2999-3022.
- Dawood Abdulhai Pandor, Behavior of High Strength Fiber Reinforced Concrete Beams in shear, Thesis of Master of Science, Massachusetts institute of technology, Feb, 1994, pp.124.
- Job Thomas and Ananth Ramaswamy, Mechanical Properties of Steel Fiber-Reinforced Concrete, Journal of Materials in Civil Engineering, Vol.19, No.5, May 1, 2007, pp.385-392. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:5(385)
- Kang, S. T. and Ryu, G. S., The Effect of Steel-Fiber Contents on the Compressive Stress-Strain Relation of Ultra High Performance Cementitious Composites (UHPCC), Journal of the Korea Concrete Institute, Vol.23, No.1, February, 2011, pp.67-75. https://doi.org/10.4334/JKCI.2011.23.1.067
- Bhargava, P., Sharma, U. K., and Kaushil, K., Compressive stress-strain behavior of small scale steel fibre reinforced high strength concrete cylinders. Journal of Advanced Concrete Technology, Vol.14, No.1, 2006, pp.109-21.
- Ou, Y. C., Tsai, M. S., Liu, K. Y., and Chang, K. C., Compressive Behavior of Steel-Fiber-Reinforced Concrete with a High Reinforcing Index, Journal of Materials in Civil Engineering, Vol.24, No.2, February 1, 2012, pp.207-215.
- A. Samer Ezeldin, Perumalsamy N. Balaguru, Normal- and High-Strength Fiber Reinforced Concrete under Compression, Journal of Materials in Civil Engineering, Vol.4, No.4, November, 1992., pp.415-429. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:4(415)
- Jo, B. W., Shon, Y. H., and Kim, Y. J., The Evalution of Elastic Modulus for Steel Fiber Reinforced Concrete, Russian Journal of Nondestructive Testing, Vol.37, No.2, 2001, pp.152D161. Translated from Defektoskopiya, No.2, 2001, pp.87D96.
- Obata Kazuhiro, Sugano Shunsuke, Araki Hideo, Kitakaze Nobu, Murakami Yuichi, Shirai Kazuyoshi, and Kimura Hideki, An experimental study on the compressive properties of the super-high strength concrete, Architectural Institute of Japan, China Branch, Research report collection, Vol.25, March, 2002, pp.329-332.
- Ramachandra Murthy, A., Nagesh R. Iyer, and B. K. Raghu Prasad, Evaluation of mechanical properties for high strength and ultrahigh strength concretes, Advances in Concrete Construction, Vol.1, No.4, 2013, pp.341-358. https://doi.org/10.12989/acc2013.1.4.341
- Nageh, N., Meleka, Alaa A. Bashandy, Mohamed A. Arab, Ultra High Strength Concrete Using Economical Materials, International Journal of Current Engineering and Technology, Vol.3, No.2, June 2013, pp.393-402.
- Moldovan, D. and Magureanu, C., Stress-Strain Diagram For High Strength Concrete Elements In Flexure, Proc. 3rd Int. Conference, Advanced Composite Materials Engineering, CONMAT 2010, 27-29 October 2010, Brasov, Romania, Transilvania University Press of Brasov, pp.137-142.
- Wasan, I. Khalil and Tayfur Y. R., Flexural Strength of Fibrous Ultra High Performance Reinforced Concrete Beams, ARPN Journal of Engineering and Applied Sciences, Vol.8, No.3, MARCH 2013, pp.200-21431.
- Narayanan, R. and Darwish, I. Y. S., Use of Steel Fibers as Shear Reinforcement, ACI Structural Journal, Vol.84, No.3, 1987, pp.216-227.