DOI QR코드

DOI QR Code

연료물성에 따른 경유 차량의 저온성능 영향 연구

A Study on the cold weather performance for diesel vehicle as fuel properties

  • 투고 : 2015.03.10
  • 심사 : 2015.06.04
  • 발행 : 2015.06.30

초록

저온에서 경유의 파라핀 왁스 생성 및 침전현상은 차량의 저온성능에 악영향을 준다. 본 연구에서는 경유에 바이오디젤, 등유, 저온특성첨가제를 혼합한 연료에 대해 연료조성에 따른 담점, 필터막힘점, 유동점 변화를 분석하였고, 경유의 저온특성에 따른 차량의 저온성능에 대해 평가하였다. 경유는 유동성향상 첨가제(WAFI)와 등유유분의 혼합량이 증가할수록 저온특성이 개선되었으며, 바이오디젤 혼합량이 증가할수록 저온특성이 악화되었다. WAFI는 필터막힘점 개선에, 등유유분은 담점 개선에 효과적이었다. 차량의 저온성능에 대하여 필터막힘점과 유동점의 영향성은 확인하였으나, 담점은 큰 영향이 없었다. 필터막힘점은 차량에 대해 저온에서의 운행가능 한계를 반영하였다.

At low temperature, Wax build-up and settling can affect adversely the cold weather performance of the diesel vehicle. In this study, we test the cold properties of diesel by blending ratio of biodiesel, kerosene and WAFI. Also, we test the cold weather performance for diesel vehicle by fuel cold properties. Cold properties of diesel are improved by adding the WAFI, kerosene and get worse by adding the biodiesel. WAFI is effective to improve a cold filter plugging point(CFPP) and Kerosene is effective to improve a cloud point(CP). CFPP and pour point(PP) are related to cold weather performance of diesel vehicle but CP is unrelated. CFPP indicate a limit temperature of vehicle driving possibility.

키워드

참고문헌

  1. Ararimeh Aiyejina; Dhurjati Prasad Chakrabarti; Angelus Pilgrim; M.K.S. Sastry, Wax formation in oil pipelines: A critical review, International Journal of Multiphase Flow, 2011, 37, 671-694 https://doi.org/10.1016/j.ijmultiphaseflow.2011.02.007
  2. Sheng Han; Peng Wang; Yuhong Wang, Impact of alkyl methacrylate-maleic anhydride-alkyl methacrylate terpolymers as cold flow improver on crystallization behavior of diesel fuel, Process Safety and Environmental Protection, 2010, 88, 41-46 https://doi.org/10.1016/j.psep.2009.09.002
  3. Gang Chen; Yobgfei Li; Wei Zhao, Investigation of cyclohexanone pentaerythritol ketal as clean flow improver for crude oil, Fuel Processing Technology, 2015, 133, 64-68 https://doi.org/10.1016/j.fuproc.2014.12.029
  4. Emmanuelle Marie; Yves Chevalier; Sylvain Brunel, Settling of paraffin crystals in cooled middle distillate fuels, Journal of Colloid and Interface Science, 2004, 269, 117-125 https://doi.org/10.1016/j.jcis.2003.07.030
  5. Norbert MISKOLCZI; Richard SAGI; Laszlo BARTHA, Utilization of α-olefins obtained by pyrolysis of waste high density polyethylene to synthesize $\alpha$-olefin-succinic-anhydride based cold flow improvers, Journal of Fuel Chemistry and Technology, 2009, 37, 302-310 https://doi.org/10.1016/S1872-5813(09)60021-9
  6. Jieni Wang; Leichang Cao; Sheng Han, Effect of polymeric cold flow improvers on flow properties of biodiesel from waste cooking oil, Fuel, 2014, 117, 876-881 https://doi.org/10.1016/j.fuel.2013.10.006
  7. A. Kleinova; J. Paligova; M. Vrbova, Cold flow properties of fatty esters, Process Safety and Environmental protection, 2007, 85, 390-395 https://doi.org/10.1205/psep07009
  8. Gaurav Dwivedi; M.P. Sharma, Impact of cold flow properties of biodiesel on engine performance, Renewable and Sustainable Energy Reviews, 2014, 31, 650-656 https://doi.org/10.1016/j.rser.2013.12.035
  9. Pengmei Lv; Yufeng Cheng; Lingmei Yang, Improving the low temperature flow properties of palm oil biodiesel: Addition of cold flow improver, Fuel Processing Technology, 2013, 110, 61-64 https://doi.org/10.1016/j.fuproc.2012.12.014
  10. M. De Torres; G. Jimenez-Oses; J.A, Maoral, Fatty acid derivatives and their use as CFPP additives in biodiesel, Bioresource Technology, 2011, 102, 2590-2594 https://doi.org/10.1016/j.biortech.2010.10.004
  11. D.H. Qi; C.F. Lee, Influence of soybean biodiesel content on basic properties of biodiesel-diesel blends, Journal of the Taiwan Institute of Chemical Engineers, 2014, 45, 504-507 https://doi.org/10.1016/j.jtice.2013.06.021
  12. Leichang Ca,; Jieni Wang; Cheng Liu, Ethylene vinyl acetate copolymer: A bio-based cold flow imporver for waste cooking oil derived biodiesel blends, Applied Energy, 2014, 132, 163-167 https://doi.org/10.1016/j.apenergy.2014.06.085
  13. Ilshat Sharafutdinov; Dicho Stratiev; Ivelina Shishkova; Cold flow properties and oxidation stability of blends of near zero sulfur diesel from Ural crude oil and FAME from different origin, Fuel, 2012, 96, 556-567 https://doi.org/10.1016/j.fuel.2011.12.062
  14. Chen Boshui; Sun Yuqiu; Fang Jianhua, Effect of cold flow improvers on flow properties of soybean biodiesel, Biomass and Bioenergy, 2010, 34, 1309-1313 https://doi.org/10.1016/j.biombioe.2010.04.001
  15. Anne L. Lown; Lars Peereboom; Sherry A. Mueller, Cold flow properties for blends of biofuels with diesel and jet fuels, Fuel, 2014, 117, 544-554 https://doi.org/10.1016/j.fuel.2013.09.067
  16. Bryan R. Moser, Impact of fatty ester composition on low temperature properties of biodieselpetroleum diesel blends, Fuel, 2014, 115, 500-506 https://doi.org/10.1016/j.fuel.2013.07.075
  17. Tuba Hatice Dogan; Hakan Temur, Effect of fractional winterization of beef tallow biodiesel on the cold flow properties and viscosity, Fuel, 2013, 108, 793-796 https://doi.org/10.1016/j.fuel.2013.02.028
  18. Chuang-wei Chiu; Leon G. Schumacher; Galen J. Suppes, Impact of cold flow improvers on soybean biodiesel blend, Biomass and Bioenergy, 2004, 27, 485-491 https://doi.org/10.1016/j.biombioe.2004.04.006
  19. Suzana Yusup; Modhar Khan, Basic properties of crude rubber seed oil and crude palm oil blend as a potential feedstock for biodiesel production with enhanced cold flow characteristics, Biomass and Bioenergy, 2010, 34, 1523-1526 https://doi.org/10.1016/j.biombioe.2010.03.022
  20. Rushang M. Joshi; Michael J. Pegg, Flow properties of biodiesel fuel blends at low temperatures, Fuel, 2007, 86, 143-151 https://doi.org/10.1016/j.fuel.2006.06.005
  21. Camelia Echim; Jeroen Maes; Wim De Geryt, Improvement of cold filter plugging point of biodiesel from alternative feedstocks, Fuel, 2012, 93, 642-648 https://doi.org/10.1016/j.fuel.2011.11.036
  22. Young-Kwan Lim; DongKil Kim; EuiSoon Yim, Synthesis of biodiesel from vegetable oil and their characteristics in low temperature, J. Korean Ind. Eng. Chem, 2009, 20, 208-212
  23. Young-Kwan Lim; Joung-Min Lee; Choong-Sub Jeong, Improvement of low temperature fuel characteristics by pour point depressant