참고문헌
- Park, D. H., Choi, B. K., Park S. B. and Kang, S. S., "An experimental study on optimization of blank shape in elliptical deep drawing process," Korean Society of Precision Engineering, Vol. 16, No. 10, pp. 101-108, 1999.
- Park, D. H., Choi, B., Park, S. B. and Kang, S. S., "Application surface area calculating system for design of blank shape of deep drawing product," Korean Society of Precision Engineering, Vol. 17, No. 4, pp. 97-105, 2000.
- Yasunori Saotome, Kaname Yasuda and Hiroshi Kaga, "Microdeep Drawability of Very Thin Sheet Steels," Journal of Materials Processing Technology, Vol. 113, NO.1-3., pp. 641-647, 2001. https://doi.org/10.1016/S0924-0136(01)00626-4
- Heo, Y. M., Wang, S. H., Kim, H. Y. and Seo, D. G., "The Effect of the Drawbead Dimensions of the Weld-Line Movements in the Deep Drawing of Taylor-Welded Blanks," Journal of Materials Processing Technology, Vol. 113, pp. 686-691, NO.1-3, 2001. https://doi.org/10.1016/S0924-0136(01)00672-0
- K. P. Rao and Emani V. R. Mohan, "A Unified Test For Evaluating Material Parameters for Use in the Modeling of Sheet Metal Forming," Journal of Materials Processing Technology Vol. 113, pp. 725-731, 2001. https://doi.org/10.1016/S0924-0136(01)00669-0
- Ahn, K. H., Yoo, D. H., Seo, M. H., Park, S. H., Chung, K. S., "Springback Prediction of TWIP Automotive Sheets," Met. Mater. Int. Vol. 15, No. 4, pp. 637-647, 2009. https://doi.org/10.1007/s12540-009-0637-z
- Lee, J. H., Chung, W. J., Kim, J. H., "Influence of Drawing Speed and Blank Holding Force in Rectangular Drawing of Ultra Thin Sheet Metal," Trans. Mater. Process, Vol. 21, No. 6, pp. 348-353, 2012. https://doi.org/10.5228/KSTP.2012.21.6.348
- Kim, J. T., Kim, B. M., Kang, C. G., "Blank Shape Design Process for a Hot Stamped Front Pillar and its Experimental Verification," Trans. Mater. Process, Vol. 21, No. 3, pp. 186-193, 2012. https://doi.org/10.5228/KSTP.2012.21.3.186
- Kim, S. H., Shim, H. B., "A Study on the Process Optimization by a Beadless Stamping," Trans. Mater. Process, Vol. 21, NO. 8, pp. 485-492, 2012. https://doi.org/10.5228/KSTP.2012.21.8.485
- Park, J. W., Ku, T. W., Kang, B. S., "Numerical Simulation for a Multi-Stage Deep Drawing of Anisotropic SUS409L Sheet into a Rectangular Cup," Trans. Mater. Process, Vol. 22, No. 3, pp. 133-142, 2013. https://doi.org/10.5228/KSTP.2013.22.3.133
- Kim, N. J., Keum, Y. T., "Experimental Determination of Friction Characteristics for Advanced High Strength Steel Sheets," Trans. Mater. Process, Vol. 22, No. 4, pp. 223-228, 2013. https://doi.org/10.5228/KSTP.2013.22.4.223
피인용 문헌
- Study on the Manufacturing Technology of 2-Cavity Fine Blanking Seat Recliner Die with Minute Module of Accurate Gear vol.15, pp.2, 2015, https://doi.org/10.14775/ksmpe.2016.15.2.022
- Arm Extraction Method of VCT Plate Parts for Automobile Engines using Fine Blanking Technology vol.29, pp.4, 2015, https://doi.org/10.7735/ksmte.2020.29.4.317