Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Internal Thrust Grinding by Machining Center

머시닝센터를 이용한 내면 스러스트 연삭가공에 관한 연구

  • Received : 2015.03.30
  • Accepted : 2015.06.22
  • Published : 2015.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the grinding characteristics of internal thrust grinding were studied with vitreous CBN wheels using a machining center. Grinding experiments were performed according to grinding conditions, such as wheel feed speed and depth of cut, workpiece speed, and rate of grinding width. Additionally, the grinding force and grinding ratio were investigated though these experiments. Based on the experimental results, the grinding characteristics of internal thrust grinding were discussed.

Keywords

References

  1. Antonini, G., "Applying Machining Center Technology to Grinding", Modern Machine Shop, Vol. 66, No. 7, pp. 70, 1993.
  2. Nakagawa, H., Hirogaki, T., Iwasaki, Y., Hayashi, T., Kita, Y. and Kakino, Y., "Study on Oscillation Grinding by Numerical Control with a Machining Center", Journal of the Japan Society of Precision Engineering, Vol. 68, No. 7, pp. 923-927, 2002. https://doi.org/10.2493/jjspe.68.923
  3. Rausch, S., Odendahl, S., Kersting, P., Biermann, D. and Zabel, A., "Simulation-Based Prediction of Process Forces for Grinding Free-Formed Surfaces on Machining Centers", Procedia CIRP, Vol. 4, pp. 161-165, 2012. https://doi.org/10.1016/j.procir.2012.10.029
  4. Choi, H., Kim, C. S., Park, W. K., and Lee, C. S., "The Effects on a Side-cut Grinding depend on the Change of the Quill Rigidity", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 5, pp. 36-41, 2013.
  5. Lee, C. S., Kim, C. S., Park, W. K., Lee, J. C. and Choi, H., "A Study on the Side-Cut Grinding using the CBN Wheels", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 98-103, 2012.
  6. Rausch, S. and Biermann, D., "Grinding of Hard-Material-Coated Forming Tools on Machining Centers", Procedia CIRP, Vol. 1, pp. 388-392, 2012. https://doi.org/10.1016/j.procir.2012.04.069

Cited by

  1. 내면 플런지 연삭과 스러스트 연삭의 비교 vol.15, pp.1, 2015, https://doi.org/10.14775/ksmpe.2016.15.1.068
  2. 연삭을 이용한 Surface Texturing에서 패턴의 기울기 변화 vol.15, pp.4, 2015, https://doi.org/10.14775/ksmpe.2016.15.4.008
  3. 스러스트 내면 연삭가공의 가공면 정도에 관한 연구 vol.15, pp.5, 2015, https://doi.org/10.14775/ksmpe.2016.15.5.073