참고문헌
- H. Shirakawa, E. J. Louis, A. G. MacDiarmid, C. K. Chiang, and A. J. Heeger, Synthesis of Electrically Conducting Organic Polymers: Halogen Derivatives of Polyacetylene, (CH)x, J. Chem. Soc., Chem. Commun., 16, 578-580 (1997).
- J. H. Hong and K. S. Jang, Synthesis and Characterization of Soluble Polypyrrole with High Conductivity, J. Korean Ind. Eng. Chem., 18, 234-238 (2007).
- Y. H. Lee, Y. W. Ju, H. R. Jung, Y. I. Huh, and W. J. Lee, Preparation of Polypyrrole/Sulfonated-SEBS Conducting Composites Through an Inverted Emulsion Pathway, J. Ind. Eng. Chem., 11, 550-555 (2005).
- J. M. Lee and K. H. Lim, Electrochemical Synthesis of Conducting Polythiophene in an Ultrasonic Field, J. Ind. Eng. Chem., 6, 157-162 (2000).
- H. Munstedt, Ageing of Electrically Conducting Organic Materials, Polymer, 29, 296-302 (1988). https://doi.org/10.1016/0032-3861(88)90337-0
- S. G. Park, J. J. Na, J. S. Lee, and R. A. Osteryoung, Characteristics of Film Preparation with Conducting Polyphenylenediamine Powder, J. Ind. Eng. Chem., 2, 181-188 (1996).
- A. Elschner, S. Kirchmeyer, W. Lovenich, U. Merker, and K. Revter, PEDOT: Principles and Applications of an Intrinsically Conductive Polymer, 199-200, CRC Press, Boca Raton, FL, USA (2010).
- K. Ando, Z. Kato, N. Uchida, K. Uematsu, and K. Saito, Wetting of aqueous solutions of organic binder (PVA) on sapphire and fused quartz, J. Mater. Sci., 24, 4048-4051 (1989). https://doi.org/10.1007/BF01168972
- S. Mandai and Y. Hirai, Polyvinylalcohol Applied for The Ink Jet Silica Binder-Application of Crosslinkable PVA Gohsefimer Z-, Japan Tappi J., 58, 1555-1562 (2004). https://doi.org/10.2524/jtappij.58.1555
- S. Wan, W. Z. Lu, Z. X. Fu, and X. C. Wang, Aqueous tape casting of ZnO varistor ceramics with PVA as binder and their properties, Electron. Compon. Mater, 34, 13-17 (2012).
- J. Cao, H. L. Lin, L. H. Yho, Y. Shi, and P. J. Xia, Chemical Sensitization of Sodium Benzenesulfinate in Photothermographic Materials Using PVA as Binder, J. Photochem. Photobiol., 23, 247-252 (2005).
- J. Cao, H. L. Lin, L. H. Yao, X. Zhi, J. P. Li, and P. J. Xia Effects of Grain Size and Content of AgBr on Sensitivity of PTG Materials Using PVA as a Hydrophilic Binder, Photogr. Sci. Photochem., 23, 6-13 (2005).
- J. Cao, H. L. Lin, L. H. Yao, Y. Shi, J. P. Li, and P. J. Xia, Effects of Conventional Chemical Sensitivity of PTG Materials Using PVA as a Hydrophilic Binder, Photogr. Sci. Photochem., 23, 108-113 (2005).
- U. Kim and W. M. Carty, The Effect of Solution Chemistry on PVA Binder Migration, Ceram. Eng. Sci. Proc., 24, 183 (2003).
- M. Moshen-Nia and M. Hamid, Viscometric study of aqueous poly(vinyl alcohol) (PVA) solutions as a binder in adhesive formulations, J. Adhesion Sci. Technol., 20, 1273-1280 (2006). https://doi.org/10.1163/156856106778456636
- J. H. Cheng and D. J. Wen, An Aqueous Photocrosslinkable Chitosan-PVA (Polyvinyl Alcohol) Binder for Tapecasting Alumina Substrates, Key. Eng. Mater., 368-372, 656-658 (2008). https://doi.org/10.4028/www.scientific.net/KEM.368-372.656
- L. Suhrenbrock, G. Radtke, and K. Knop, Suspension pellet layering using PVA-PEG graft copolymer as a new binder, Int. J. Pharm., 412, 28-36 (2011). https://doi.org/10.1016/j.ijpharm.2011.03.061
-
W. X. Yuan and Z. J. Li, Effects of PVA organic binder on electric properties of
$CaCu_3Ti_4O_{12}$ ceramics, J. Chem. Phy., 73, 599-603 (2012). - H. Miura, K. Morohosh, J. Okada, B. Lin, and M. Kimura, Tensile Strength and Conductive Performance of PVA and PEDOT/PSS Blended Fiber, SEN'I GAKKAISHI, 66, 280-283 (2010). https://doi.org/10.2115/fiber.66.280
- N. Romyen, S. Thongyai, P. Preserthdam, and G. A. Sotzing, Enhancement of poly(3,4-ethylenedioxy thiophene) / poly(styrene sulfonate) properties by poly(vinyl alcohol) and doping agent as conductive nano-thin film for electronic application, J. Mater. Sci., 24, 2897-2905 (2013).
- S. C. Biswas, L. Dubreil, and D. Marion, Interfacial Behavior of Wheat Puroindolines: Study of Adsorption at the Air-Water Interface from Surface Tensio Measurement Using Wilhelmy Plate Method, J. Coll. Interf. Sci., 244, 245-253 (2001). https://doi.org/10.1006/jcis.2001.7940
- M. A. Mckee, B. S. Yoo, and R. A. Stall, Uniform growth of InSb on GaAs in a rotating disk reactor by LP-MOVPE, J. Cryst. Growth, 124, 286-291 (1992). https://doi.org/10.1016/0022-0248(92)90473-V
- H. Ji, H. M. Lim, Y. W. Chang, and H. S. Lee, Comparison of the Viscosity of Ceramic Slurries using a Rotational Rheometerand a Vibrational Viscometer, J. Korean Ceram. Soc., 49, 542-548 (2012). https://doi.org/10.4191/kcers.2012.49.6.542
- M. H. Ahn, E. S. Cho, and S. J. Kwon, Process Optimization of ITO Film on PC Substrate Deposited by In-line Sputtering Method for a Resistive-type Touch Panel, J. Korean Vacuum. Soc., 6, 440-446 (2009).
- J. Y. Kim, H. J. Yang, N. Y. Pak, Y. J. Choi, S. M. Lee, and D. W. Chung, Study on the Synthesis of the Binder for Antistatic Coating Applicable under High Voltage, Appl. Chem. Eng., 24, 196-200 (2013).
- J. Y. Chea, J. K. Yoon, O. G. Kang, B. J. Ryn, and K. W. Koo, The Electrical Characteristics of the Antistatic Wafer Carrier, Trans Korean Inst Electr Eng., 63, 319-324 (2014). https://doi.org/10.5370/KIEE.2014.63.2.319
- H. L. Wang, D, W. Mcbranch, V. I. klimov, and R. Helgeson, Controlled unidirectional energy transfer in luminescent self-assembled conjugated polymer superlattices, Chem. Phys. Lett., 315, 173-180 (1999). https://doi.org/10.1016/S0009-2614(99)01176-8
- J. W. Bae, S. H. Cha, and J. N. Park, A new polymeric binder for silicon-carbon nanotube composites in lithium ion battery, Macro. Mol. Res., 1, 826-831 (2013).
- A. Kaminska, H. Kaczmarek, and J. Kowalonek, The Influence of side groups and polarity of polymers on the kind and effectiveness of their surface modification by air plasma action, Eur. Polym. J., 38, 1915-1919 (2002). https://doi.org/10.1016/S0014-3057(02)00059-9
- H. W. Chung and S. R. Kim, Detergency of PET Film Having Various Surface Free Energy: Part 1. Surface Tension of MAA Grafted PET Film, J. Korean Soc. Cloth Text, 12, 217-223 (1988).
- M. C. M. Zaccaron, R. V. B Oliveira, M. Guiotoku, A. T. N. Pires, and V. Soldi, Blends of hydroxypropyl methylcellulose and poly(1-vinylpyrrolidon -co-vinyl acetate) Miscibility and thermal stability, Polym. Degrad. Stab., 90, 21-27 (2005). https://doi.org/10.1016/j.polymdegradstab.2005.02.010
- R. Jayasekara, I. Harding, I. Bowater, G. B. Y. Christie, and G. T. Lonergan, Preparation, surface modification and characterisation of solution cast starch PVA blended films, Polym. Test., 23, 17-27 (2004). https://doi.org/10.1016/S0142-9418(03)00049-7
- M. H. Abou_Taleb, Thermal and Spectroscopic Studies of Poly(N-vinylpyrrolidone)/Poly(vinyl alcohol) Blend Films, J. Appl. Polym. Sci., 14, 1202-1207 (2009).
- N. Nishioka, S. Hamabe, T. Murakami, and T. Kitagawa, Thermal Decomposition Behavior of Miscible Cellulose/Synthetic Polymer Blends, J. Appl. Polym. Sci., 69, 2133-2137 (1998). https://doi.org/10.1002/(SICI)1097-4628(19980912)69:11<2133::AID-APP4>3.0.CO;2-H
- A. B. Seabra and M. G. de Oliveira, Poly(vinyl alcohol) and poly(vinyl pyrrolidone) blended films for local nitric oxide release, Biomaterials, 25, 3773-3782 (2004). https://doi.org/10.1016/j.biomaterials.2003.10.035