참고문헌
- Benter, A. and Mindess, S., "Fiber-Reinforced Cementitious Composite," Elesevier Science, London, 1990, pp. 1-20.
- Mindess, S, Young, J. F. and Darwin, D., "Concrete," Prentice Hall, New Jersey, 2003, pp. 599-618.
- Abrishami, H. H. and Mitchell, D., "Influence of Steel fibers on Tension Stiffening," ACI Structural Journal, Vol. N0. 6, 1997, pp. 769-776.
- Kwon, W. H, Kim, W. S., Kang, T. H. K., Hong, S. G. and Kwak, Y. K., Behavior of Steel Fiber-Reinforced Concrete Exterior Connections under Cyclic Loads," Korea Concrete Institute, Vol. 23, No. 6, 2011, pp. 711-722. https://doi.org/10.4334/JKCI.2011.23.6.711
- Yang, I. H., Joh, C. B., Kang, S. T. and Kim, B. S., "An Experimental Study on Flexural Behavior of Steel Fiber Reinforced Ultra High Performance Concrete," Korea Concrete Institute, Vol. 21, No. 6, 2009, pp. 737-744. https://doi.org/10.4334/JKCI.2009.21.6.737
- Ku, D. O., Kim S. D., Kim, H. S. and Choi, K. K., "Flexural Performance Characteristics of Amorphous Steel Fiber-Reinforced Concrete," Korea Concrete Institute, Vol. 26, No. 4, 2014, pp. 483-489. https://doi.org/10.4334/JKCI.2014.26.4.483
- Oh, Y. H., "Evaluation of Flexural Sterngth for Normal and High Strength Concrete with Hooked Steel Fibers," Korea Concrete Institute, Vol. 20, No. 4, 2008, pp. 531-539. https://doi.org/10.4334/JKCI.2008.20.4.531
- Banthia, N. and Sappakittipakorn, M., "Toughness Enhancement in the Steel Fiber Reinforced Concrete through Fibers Hybridization," Cement and Concrete Research, Vol. 37, 2007, pp. 1366-1372. https://doi.org/10.1016/j.cemconres.2007.05.005
- Park, K. W, Lee, J. S., Kim, W., Kim, D. J. and Lee, G. Y., "Cracking Behavior of RC Tension Members Reinforced with Amorphous Steel Fibers, Korea Concrete Institute, Vol. 26, No. 4, 2014, pp. 475-482. https://doi.org/10.4334/JKCI.2014.26.4.475
- Yang, J. M., Yoon, S. H., Choi, S. J., and Kim, G. D., "Development and Application of Pig Iron Based Amporphous Fiber for Concrete Reinforcement," Magazine of the Korea Concrete Insitute, Vol. 25, No. 4, 2013, pp. 38-41.
- Park, K. W, Lee, J. S., Kim, W., Kim, D. J. and Lee, G. Y., "Tension Stiffening Effect of RC Tension Members Reibforced with Amporphous Steel Fibers, Korea Concrete Institute, Vol. 26, No. 5, 2014, pp. 581-589. https://doi.org/10.4334/JKCI.2014.26.5.581
- Kim, B and Lee S. H., "Comparison Analysis of Fiber Distribution and Worability for Amporphous Steel Fiber Reinforced Concrete," J. of Korean Inst. of Resources Recycling, Vol. 23, No. 4, 2014, pp. 47-57. https://doi.org/10.7844/kirr.2014.23.4.47
- ASTM C1399,"Standard Test Method for Obtaining Average Residual-Strength of Fiber- Reinforced Concrete," ASTM International, West conshohocken, PA, 2010.
- ASTM C1609,"Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete(Using Beam with Thrid-Point Loading)," ASTM International, West conshohocken, PA, 2012.
- ASTM C1018,"Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber Reinforced Concrete(Using Beam with Thrid-Point Loading)," ASTM International, West conshohocken, PA, 1997.
- Bentur, A., Mindess, S., Diamond, S.,"Pull-out processes in steel fibre reinforced cement," International Journal of Cement Composites and Lightweight Concrete, 7(1), Feb. 1985, pp. 29-37. https://doi.org/10.1016/0262-5075(85)90024-7
- Frantzis, P. and Baggott, R.,"Transition Points in Steel Fibre Pull-out Tests from Magnesium Phosphate and Accelerated Calcium Aluminate Binders," Cement and Concrete Composites, 25(1), Jan. 2003, pp. 11-17. https://doi.org/10.1016/S0958-9465(01)00053-1
- Choi, H., "Shrinkage Cracking Characteristics of Micro Steel Fiber Reinforced Concrete," Soongil University, Seoul, Korea, 2010, pp. 38-48.