DOI QR코드

DOI QR Code

주행시험기를 이용한 차륜의 안전성 평가에 관한 연구

A Study on Safety Evaluation of Wheel Using Roller Rig Tester

  • 함영삼 (한국철도기술연구원 철도안전연구실)
  • Ham, Young Sam (Railroad Safety Research Division, Korea Railroad Research Institute)
  • 투고 : 2015.06.09
  • 심사 : 2015.06.17
  • 발행 : 2015.07.01

초록

The roller rig tester for safety performance evaluation of wheel derailment is a test facility which can give the test load condition to the test wheel, similar to the actual dynamic condition in actual running condition. This study describes the evaluation result on the durability of the resilient wheel equipped with the ring damper and the damping material, and installed in the half part of a full scaled bogie in combination with the primary spring when it rotates under the dynamic condition. The evaluation result on durability of resilient wheel after load test of 2 million cycles shows that the safety of wheel is not affected by the applied load in visual inspection and nondestructive test, however, in the bolt used for fastening the ring damper to the wheel the loosening was found. Accordingly the use of self-locking nut and washer is recommended.

키워드

참고문헌

  1. Lee, H.-S., Joo, S.-M., Kim, H.-K., and Kwon, S.-J., "Estimation of Fatigue Damage due to Running and Sliding Contact in a Train Wheel of the Subway Line 7," Proc. of Korean Society for Railway Autumn Conference, pp. 2052-2061, 2009.
  2. BS EN 13262:2004+A1:2008, "Railway Applications - Wheelsets and Bogies - Wheels - Product Requirements," 2004.
  3. BS EN 13979-1:2003+A2:2011, "Railway Applications - Wheelsets and Bogies - Monobloc Wheels - Technical Approval Procedure - Part 1: Forged and Rolled Wheels," 2004.
  4. BS EN 13715:2006+A1:2010, "Railway Applications - Wheelsets and Bogies - Wheels - Tread Profile," 2006.
  5. Seo, J. W., Kwon, S. J., Lee, D. H., Jun, H. K., and Park, C. K., "Evaluation of Mechanical Characteristic and Residual Stress for Railway Wheel," J. Korean Soc. Precis. Eng., Vol. 31, No. 9, pp. 783-790, 2014. https://doi.org/10.7736/KSPE.2014.31.9.783
  6. Lee, S.-H., Park, T.-W., Park, J.-K., Yoon, J.-W., Jun, K.-J., et al., "Fatigue Life Analysis of Wheels on Guideway Vehicle Using Multibody Dynamics," Int. J. Precis. Eng. Manuf., Vol. 10, No. 5, pp. 79-84, 2009. https://doi.org/10.1007/s12541-009-0097-x