대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제39권6호
  • /
  • Pages.589-596
  • /
  • 2015
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

압전재료에 대한 면외하중하의 모서리 경사 균열

Inclined Edge Crack in a Piezoelectric Material Under Antiplane Loads

  • 투고 : 2015.02.02
  • 심사 : 2015.05.08
  • 발행 : 2015.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

횡등방성 압전재료에 대한 모서리경사균열 문제를 해석하였다. 두 기계적 집중 면외하중과 전기적 집중 면내하중이 표면과 균열면에 각각 작용하고, 균열면은 절연균열면이다. 일반화된 변위벡터를 도입하고 Mellin 변환을 사용하여 문제를 수식화하고, 이로부터 Wiener-Hopf 식을 유도하였다. 이식을 풀므로써 폐형으로 주어지는 해를 얻었다. 임의의 균열길이나 경사각에 대해서도 적용이 되는 응력 및 전기변위 강도계수와 에너지 방출율을 구하였다. 이 해는 중첩에 의하여 임의로 분포하는 전기기계하중 문제에 대한 해를 제공하는 기본해로 사용될 수 있다.

The occurrence of an inclined edge crack in transversely piezoelectric material is analyzed. Concentrated antiplane mechanical and inplane electrical loads are applied at the boundary and crack surface, respectively. The crack surfaces are assumed to be impermeable to the electric field. Using the Mellin transform with the introduction of a generalized displacement vector, the problem is formulated, and the Wiener-Hopf equation is derived. By solving the equation, the solution is obtained in a closed form. The intensity factors of the stress, the electric displacement, and the energy release rate are obtained for any crack length and inclination angle. These solutions can be used as fundamental solutions and can be superimposed to represent any arbitrary electromechanical loading.

키워드

과제정보

연구 과제 주관 기관 : 영남대학교

참고문헌

  1. Parton, V. Z., 1976, "Fracture Mechanics of Piezoelectric Materials," Acta Astronautica, Vol. 3, pp. 671-683. https://doi.org/10.1016/0094-5765(76)90105-3
  2. Pak, Y. E., 1990, "Crack Extension Force in a Piezoelectric Materials," Journal of Applied Mechanics, Vol. 57, pp. 647-653. https://doi.org/10.1115/1.2897071
  3. Pak, Y. E., 1992, "Linear Electro-elastic Fracture Mechanics of Piezoelectric Materials," Int. J. Frac, Vol. 54, pp. 79-100. https://doi.org/10.1007/BF00040857
  4. Suo, Z., Kuo, C. -M., Barnett, D. M. and Willis, J. R., 1992, "Fracture Mechanics for Piezoelectric Ceramic," J. Mechanics Physics Solids, Vol. 40, pp. 739-765. https://doi.org/10.1016/0022-5096(92)90002-J
  5. Kwon, J. H., Kwon, S. M., Shin, J. W. and Lee, K. Y., 2000, "Determination of Intensity Factors in Piezoelectric Ceramic Strip with Impermeable Crack," Trans. Korean Soc. Mech. Eng. A, Vol. 24, No. 6, pp. 1601-1607. https://doi.org/10.22634/KSME-A.2000.24.6.1601
  6. Shin, J. W., Kwon, S. M. and Lee, K. Y., 2001, "Eccentric Crack in a Piezoelectric Strip Under Electro-Mechanical Loading," KSME International Journal, Vol. 15, No. 1, pp. 21-25 https://doi.org/10.1007/BF03184794
  7. Shindo, Y., Narita, F. and Tanaka, K., 1996, "Electroelastic Intensification Near Anti-Plane Shear Crack in Orthotropic Piezoelectric Ceramic Strip," Theoretical and Applied Fracture Mechanics, Vol. 25, pp. 65-71. https://doi.org/10.1016/0167-8442(96)00008-0
  8. Kwon, J. H., 2004, "Central Crack in a Piezoelectric Disk," KSME International Journal, Vol. 18, No. 9, pp. 1549-1558. https://doi.org/10.1007/BF02990369
  9. Choi, S. T. and Earmme, Y. Y., 1998, "Antiplane Problem of Interfacial Circular-Arc Cracks in Transversely Isotropic Piezoelectric Media," Trans. Korean Soc. Mech. Eng. A, Vol. 22, No. 5, pp. 868-876.
  10. Li, X. -F. and Fan, T. -Y., 2001, "Mode-III Interface Edge Crack Between Two Bonded Quarter-Planes of Dissimilar Piezoelectric Materials," Archieve of Applied Mechanics, Vol. 71, pp. 703-714. https://doi.org/10.1007/s004190100175
  11. Choi, S. R., 2008, "Green's Function of Edge Crack in Transversely Isotropic Piezoelectric Material Under Anti-Plane Loads," Trans. Korean Soc. Mech. Eng. A, Vol. 32, No. 1, pp. 43-53. https://doi.org/10.3795/KSME-A.2008.32.1.043
  12. Wu, X.-F., Cohen, S. and Dzenis, Y. A., 2003, "Screw Dislocation Interacting with Interfacial and Interface Cracks in Piezoelectric Bimaterials," International Journal of Engineering Science, Vol. 41, No. 7, pp. 667-682. https://doi.org/10.1016/S0020-7225(02)00155-6
  13. Wu, X.-F. and Dzenis, Y. A., 2003, "Screw Dislocation Interacting with an Interfacial Edge Crack Between Two Bonded Dissimilar Wedges," International Journal of Fracture, Vol. 117, L9-L14.
  14. Sosa, H. A. and Pak, Y. E., 1990, "Three-Dimensional Eigenfunction Analysis of a Crack in a Piezoelectric Material," Int. J. Solids Structures, Vol. 26, No.1, pp. 1-15. https://doi.org/10.1016/0020-7683(90)90090-I
  15. Noble, B., 1958, Methods Based on the Wiener-Hopf Technique, Pergamon Press, London.
  16. Gradshteyn, I. S. and Ryzhik, I. M., 2007, Table of Integrals, Series, and Products, 7th Ed., Academic Press, New York.
  17. Hwang, E. H., Choi S. R. and Earmme Y. Y., 1992, "Inclined Edge Crack in Two Bonded Elastic Quarter Planes Under Out-of-Plane Loading," Int. Journ. of Fracture, Vol. 56, R39-R49. https://doi.org/10.1007/BF00012333

피인용 문헌

  1. A Permeable Wedge Crack in a Piezoelectric Material Under Antiplane Deformation vol.39, pp.9, 2015, https://doi.org/10.3795/KSME-A.2015.39.9.859
  2. Asymmetric impermeable wedge crack in a piezoelectric material under anti-plane deformation vol.32, pp.10, 2018, https://doi.org/10.1007/s12206-018-0924-z