DOI QR코드

DOI QR Code

Study of the Fluid Flow on Proportional Valve in Spool Displacement using CFD

  • Li, Kui-Ming (Department of Mechanical Design Engineering, Center for Marine-Integrated Biomedical Technology, Pukyong National University) ;
  • Choi, Yoon-Hwan (Department of Mechanical Design Engineering, Pukyong National University) ;
  • Lee, Ill-Yeong (Department of Mechanical Design Engineering, Center for Marine-Integrated Biomedical Technology, Pukyong National University) ;
  • Lee, Yeon-Won (Department of Mechanical Design Engineering, Pukyong National University)
  • Received : 2014.11.05
  • Accepted : 2015.04.06
  • Published : 2015.04.30

Abstract

The main objective of this work is to estimate the fluid flow of a proportional valve. The study is based on the classical compressible flow theory and the computations with the help of CFD based commercial software - ANSYS CFX. The fluid flow with the movement of spool along the sleeve is simulated. To change the spool moving from 0.4mm to 2.0mm, the moving mesh method with different condition of orifice is considered here. The results show that it is the highest at the 80 % (1.6mm) opening and at the 20 % (0.4mm) opening, is the lowest.

Keywords

References

  1. R. Poley, 2005, "DSP Control of Electro-Hydraulic Servo Actuators", Application Report.
  2. R. Amirante, D. Vescovo and A. Lippolis, 2006, "Flow forces analysis of an open centre hydraulic directional control valve sliding spool", Energy Convers Manage, Vol. 47, No. 1, pp. 114-31. https://doi.org/10.1016/j.enconman.2005.03.010
  3. R. Amirante, D. Vescovo and A. Lippolis, 2006, "Evaluation of the flow forces on an open centre directional control valve by means of a computational fluid dynamics analysis", Energy Convers Manage, Vol. 47, pp. 1748-1760. https://doi.org/10.1016/j.enconman.2005.10.005
  4. T. J. Chung, 2002, "Computational Fluid Dynamics", Cambridge University Press, Cambridge.
  5. R. Amirante, PG. Moscatelli and LA. Cartalano, 2007, "Evaluation of the flow forces on a direct (single stage) proportional valve by means of a computational fluid dynamics analysis", Energy Convers Manage, Vol. 48, pp. 942-53. https://doi.org/10.1016/j.enconman.2006.08.024
  6. J. C. Renn and T. C. Kao, 2003, "Application of CFD to design a power-saving hydraulic directional two-land-four-way-valve", In: Proceedings of the 1st international conference on computational methods in fluid power technology, pp. 26-28.
  7. H. K. Versteeg and W. Malalasekera, 1995, "An Introduction to Computational Fluid Dynamics. The Finite Volume Method", Longman, England.
  8. 72 Series installation and Operation Instruction, Moog-Inc, www.moog.com.