DOI QR코드

DOI QR Code

A Study on the Improvement of BIM Request for Proposal by Analyzing Problems of Public Construction BIM Delivery Guides

공공공사 BIM 발주지침 문제점 분석을 통한 입찰안내서 개선방안 도출

  • 박규현 (성균관대학교 미래도시융합공학과, 한국공항공사) ;
  • 진상윤 (성균관대학교 건축토목공학부/미래도시융합공학과)
  • Received : 2014.12.04
  • Accepted : 2015.02.16
  • Published : 2015.03.30

Abstract

The purpose of this study is to analyze the problems of public construction BIM delivery guides and to draw the improvement of BIM RFP. Since BIM was introduced in Korea in 2007, it has been applied to multiple public construction projects. Yet the specific standards which can be applied to practical business were inadequate and BIM use remains at the elementary level. This study has analyzed four domestic and foreign delivery guides and nine public construction BIM projects. Delphi technique was applied to draw forty-six improvement plans of RFP from BIM specialists. Moreover, the final improvement plans were drawn after comparing with previous studies. The results of this study can contribute to promote the active use of BIM in Korea.

Keywords

Acknowledgement

Supported by : 국토교통부

References

  1. 강혜민, 건설조직의 BIM 수행역량 성숙도 진단 및 인식비교에 관한 연구, 석사학위논문, 이화여자대학교, 2012
  2. 국토교통부, 건축분야 BIM 적용가이드, 2010
  3. 국토교통부, 한국토지주택공사, 공동주택의 BIM활성화 방안 및 지침 마련 연구 보고서, 2012년 2월
  4. 국토연구원, 알기 쉬운 국토연구방법론, 2009
  5. 권오철, 조찬원, 국내외 BIM가이드 분석을 통한 BIM 품질관리 기준의 제안, 한국건축시공학회지, 11(3), 2011
  6. 김미혜, 건설당사자별 BIM 저해요소에 대한 중요도분석을 통한 BIM 활성화 방안, 석사학위논문, 중앙대학교, 2012
  7. 김윤희, 실무 가이드라인 개발을 위한 BIM 가이드라인 비교 분석, 석사학위논문, 연세대학교, 2012
  8. 김정필, 국내 건설업에서의 BIM의 적용 문제점과 효율적인 적용방안에 관한 연구, 석사학위논문, 영남대학교, 2011
  9. 김정헌, 용인시민체육공원 BIM 활용사례, 한국건설관리학회지, 13(3), 2012
  10. 김지현, 김영진, 김성아, 진상윤, 국내외 BIM 발주지침 분석을 통한 국내 BIM 가이드라인 개발방향 제시, 한국건설관리학회 학술발표논문집, 2011
  11. 박규현, 한진택, 정용채, 진상윤, 시공단계 BIM성과분석을 통한 발주지침 개선방향에 관한 기초연구, 한국BIM학회 학술발표논문집, 4(1), 2014
  12. 박찬호, 한국 AEC 참여자들의 BIM 수용도 평가, 석사학위논문, 성균관대학교, 2014
  13. 서종철, 김인한, 개방형 BIM 지침 개발에 관한 국외의 지침 분석 및 전략적 방향에 관한 연구, 한국건설관리학회 논문집, 10(4), 2009
  14. 서종철, 김인한, 국내 건설 공공발주에서 BIM의 도입 및 적용을 위한 기본방향에 관한 연구, 대한건축학회 논문집, 25(9), 2009
  15. 서종철, 김한준, 김인한, 건축설계 단계에서 설계품질 향상을 위한 개방형 BIM기반 품질관리 방안, 한국건설관리학회 논문집, 13(4), 2012
  16. 송미림, 윤수원, 진상윤, BSC를 기반으로 한 BIM 프로젝트의 만족도 측정에 관한 연구, 한국건설관리학회 논문집, 12(4), 2011
  17. 송종관, 주기범, BIM 모델의 완성도를 높이기 위한 품질검토 항목의 룰 개발, 한국건설관리학회 논문집, 14(5), 2013
  18. 심구식, 김성만, 안재홍, 공공시설 발주자 입장에서의 BIM 현황 및 개선방안, 한국BIM학회 학술발표논문집, 3(1), 2013
  19. 심창수, 공공 발주자의 BIM 도입 전략, 한국BIM학회 학술발표 논문집 2(1), 2012
  20. 유용신, 정지성, 정인수, 윤호빈, 이찬식, 시공단계의 BIM기반 건설사업관리 업무절차 모델 개발, 한국건설관리학회 논문집, 14(1), 2013
  21. 윤준선, 건축턴키공사 입찰안내서의 문제점과 개선방안에 관한 연구, 한국중재학회 중재연구, 15(3), 2005
  22. 이성웅, Delphi기술예측기법의 유용성에 관한 연구, 석사학위논문, 전북대학교, 1987
  23. 정광량, BIM 설계 사례를 통해 본 문제점과 해결책, 한국건축시공학회 논문집, 10(3), 2010
  24. 조달청, 시설사업 BIM적용 기본지침서 v1.2, 2013
  25. 조성, 공공 건설프로젝트의 BIM 요구사항과 평가방법에 관한 참여자의 의견조사 연구, 석사학위논문, 연세대학교,2010
  26. 최희선, 건설산업 BIM 활성화 저해 영향요인 도출에 관한 연구, 석사학위논문, 한양대학교, 2010
  27. 포스코건설, BIM in Practice, 2013
  28. 한국건설산업연구원, 건설회사의 BIM 활용 실태 조사 및 시사점, 2012
  29. BCA, Singapore BIM Guide Version2, 2013
  30. Brian, G. and John, K., VDC Use in 2007, STANFORD UNI VERSITY CIFE Technical Report, 2007
  31. BuildingSmart, 설계분야의 BIM 해결과제 및 공동 대응방안, BuildingSmart Forum, 2008
  32. Chuck, E., Paul. T., Rafael, S. and Kathleen, L., BIM Hand book, John Wiley & Sons, 2011
  33. Department of Veterans Affairs, The VA BIM Guide, 2010
  34. John, H. and Martin, F., Challenges and Benefits of 4D Mode ling on the Walt Disney Concert Hall Project, STANFORD UNIVERSITY CIFE Working Paper, 2001
  35. Khil Chae Kim, A Study on the level of development of build ing information modeling design process, The 4th ICCEPM, Sydney, Australia, 2011
  36. Martin H., BIM Anatomy, Lund University, 2012
  37. McGraw-Hill Construction, SmartMarket Report(BIM for Construction Data From Contractors in South Korea), 2014
  38. McGraw-Hill Construction, SmartMarket Report(Top Obsta cles to BIM Adoption, Adoption of BIM), 2008
  39. Miller, M. M, Enhancing Regional Analysis with the Delphi Method, The Review of Regional Studies, 23(3), 1993
  40. Rafael, S. and Ronen B., A Methodology for Assessment of the Impact of 3D Modeling of Buildings on Structural Engineering Productivity, Computing in Civil Engineering, Mexico, 2005