DOI QR코드

DOI QR Code

반응표면법 및 크리깅을 이용한 아우터 타이로드의 구조 최적화

Structural Optimization of an Outer Tie Rod Using RSM and Kriging

  • Kim, Young-Jun (Technical Center, Central Corporation) ;
  • An, Kyo-Jin (Graduate school, Department of Mechanical Engineering, Dong-A University) ;
  • Lee, Kwon-Hee (Department of Mechanical Engineering, Dong-A University) ;
  • Park, Young-Chul (Department of Mechanical Engineering, Dong-A University)
  • 투고 : 2014.11.10
  • 심사 : 2015.01.08
  • 발행 : 2015.01.31

초록

본 연구에서는 기존의 연구로부터 아우터 타이로드는 다른 구조적인 특성보다는 좌굴특성이 가장 극악한 조건임을 알 수 있었다. 따라서 본 연구에서는 좌굴 성능만을 검토하여 최적설계를 수행하였다. 또한 개박 초기에 검토되었던 강 재질을 알루미늄으로 변경하여 경량화를 구현하였다. 알루미늄 아우터 타이로드에 대해 설계변수를 선정하고 반응표면법과 크리깅을 적용하여 각각 경량화 설계를 제시하였다.

It is known that the severest loading condition is the buckling case in the structural design of an outer tie rod. The optimum design of the OTR was suggested considering the buckling performance. The aluminum alloy was investigated as a steel substitute. Then, the structural optimization based on the response surface method and the kriging interpolation method were performed.

키워드

참고문헌

  1. J.K. Kim, Y.J. Kim, W.H. Yang, Y.C. Park, K.H. Lee "Structural Design of an Outer Tie Rod for a Passenger Car," International Journal of Automotive Technology, Vol 12, Issue 3, pp.375-381. DOI: http://dx.doi.org/10.1007/s12239-011-0044-6
  2. B.K. Seo, J.K. Kim, D.J. Lee, S.M. Seo, K.H. Lee, Y.C. Park "Structural Design of the Outer Tie Rod for and Electrical Vehicle" Journal of the Korea Academia-Industrial cooperation Society, Vol. 14, No. 9, pp.4171-4177, 2013. https://doi.org/10.5762/KAIS.2013.14.9.4171
  3. Song B. C., Park Y. C., Kang S. W., Lee K. H.,"Structural Optimization of an Upper Control Arm, Considering the Strength," Journal of Automobile Engineering, Vol. 223, No. 6, pp. 727-735, 2009. DOI: http://dx.doi.org/10.1243/09544070JAUTO1090
  4. B.K. Seo, J.K. Kim, D.J. Lee, S.M. Seo, K.H. Lee, Y.C. Park "Structure Design of the Outer Tie Rod for an Electrical Vehicle," Journal of Korea Academia-Industrial cooperation Society, Vol.14, No.9, 2013, pp.4171-4177 https://doi.org/10.5762/KAIS.2013.14.9.4171
  5. Y. C. Park, S.K. Baek, B. K. Seo, J. K. Kim, K. H. Lee "Lightweight Design of an Outer Tie Rod for an Electrical Vehicle," Journal of Applied Mathematics, Vol 2014, Article ID 942645, 6pages.
  6. I. K. Bang, D. S. Han, G. J. Han, K. H. Lee "Structural Optimization for a Jaw Using the Kriging Model," Journal of Mechanical Science and Technology, Volume 22, Issue 9, pp 1651-1659, 2008 DOI: http://dx.doi.org/10.1007/s12206-008-0704-2
  7. B. C. Song, Y. C. Park, S. W. Kang, K. H. Lee "Structural Optimization of an Upper Control Arm, Considering the Strength." Proceeding of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. 223 No. 6, 727-735.
  8. B. C. Song, K. H. Lee "Structural Optimization of a Circumferential Disk Brake with Consideration of Thermoelastic Instability," International Journal of Automotive Technology, Vol. 10, No. 3, pp321-328, 2009 DOI: http://dx.doi.org/10.1007/s12239-009-0037-x
  9. Marzbanrad Javed, Abdollahpoor Amir, Mashadi Behrooz "Effects of the Triggering of Circular Aluminum Tubes on Crashworthiness." International Journal of Crashworthiness, Vol. 14, No. 6, pp.591-599, 2009 DOI: http://dx.doi.org/10.1080/13588260902896458
  10. Sun G, Li G, Li Q "Variable Fidelity Design based Surrogate and Artificial Bee Colony Algorithm for Sheet Metal Forming Process," Finite Elements in Analysis and Design : the International Journal of applied Finite Elements and Computer Aided Engineering, Vol. 59, pp76-90, 2012 DOI: http://dx.doi.org/10.1016/j.finel.2012.04.012
  11. Xue Guan Song, Kwon Hee Lee, Han Seok Park, Young Chul Park "Application of Response Surface Model and Kriging Model to ADI Lower Control Arm Optimization," Computational Sciences and Optimization, 2009. International Joint Conference on Vol. 2, pp.1013-1016, 2009 DOI: http://dx.doi.org/10.1109/CSO.2009.24

피인용 문헌

  1. Lightweight Design of an Outer Tie Rod Using Meta-Model Based Optimization Technique vol.16, pp.11, 2015, https://doi.org/10.5762/KAIS.2015.16.11.7754