References
- Gross, B. C., et al. (2014) Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. Anal. Chem. 86: 3240-3253. https://doi.org/10.1021/ac403397r
- Bose, S., M. Roy, and A. Bandyopadhyay. (2012) Recent advances in bone tissue engineering scaffolds. Trends Biotechnol. 30: 546-554. https://doi.org/10.1016/j.tibtech.2012.07.005
- Murphy, S. V. and A. Atala (2014) 3D bioprinting of tissues and organs. Nat. Biotechnol. 32: 773-785. https://doi.org/10.1038/nbt.2958
- Williams, David F. (2008) On the mechanisms of biocompatibility. Biomaterials 29: 2941-2953. https://doi.org/10.1016/j.biomaterials.2008.04.023
- Peltola, S. M., et al. (2008) A review of rapid prototyping techniques for tissue engineering purposes. Ann. Med. 40: 268-280. https://doi.org/10.1080/07853890701881788
- Phillippi, J. A., et al. (2008) Microenvironments engineered by inkjet bioprinting spatially direct adult stem cells toward muscle- and bone-like subpopulations. Stem Cells 26: 127-134. https://doi.org/10.1634/stemcells.2007-0520
- Skardal, Aleksander, et al. (2010) Photocrosslinkable hyaluronangelatin hydrogels for two-step bioprinting. Tissue Eng. Part A 16: 2675-2685. https://doi.org/10.1089/ten.tea.2009.0798
- Gillette, B. M., J. A. Jensen, M. Wang, J. Tchao, and S. K. Sia (2010) Dynamic hydrogels: switching of 3D microenvironments using two-component naturally derived extracellular matrices. Adv. Mater. 22: 686-691. https://doi.org/10.1002/adma.200902265
- Park, J. S., et al. (2007) In vitro and in vivo test of PEG/PCL-based hydrogel scaffold for cell delivery application. J. Control Release. 124: 51-59. https://doi.org/10.1016/j.jconrel.2007.08.030
- Singh, M., H. M. Haverinen, P. Dhagat, and G. E. Jabbour. (2010) Inkjet printing-process and its applications. Adv. Mater. 22: 673-685. https://doi.org/10.1002/adma.200901141
- Cui, X., et al. (2010) Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells. Biotechnol. Bioeng. 106: 963-969. https://doi.org/10.1002/bit.22762
- Xu, T., et al. (2006) Viability and electrophysiology of neural cell structures generated by the inkjet printing method. Biomaterials 27: 3580-3588.
- Xu, T., et al. (2005) Inkjet printing of viable mammalian cells. Biomaterials 26: 93-99. https://doi.org/10.1016/j.biomaterials.2004.04.011
- Nair, K., et al. (2009) Characterization of cell viability during bioprinting processes. Biotechnol. J. 4: 1168-1177. https://doi.org/10.1002/biot.200900004
- Hunt, N. C., G. L. (2010) Cell encapsulation using biopolymer gels for regenerative medicine. Biotechnol. Lett. 32: 733-742. https://doi.org/10.1007/s10529-010-0221-0
- Xu, T., et al. (2013) Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications. Biofabrication 5: 015001. https://doi.org/10.1088/1758-5082/5/1/015001
- Park, S. H., et al. (2008) Development of dual scale scaffolds via direct polymer melt deposition and electrospinning for applications in tissue regeneration. Acta Biomater. 4: 1198-1207. https://doi.org/10.1016/j.actbio.2008.03.019
- Kim, J. D., J. S. Choi, B. S. Kim, Y. C. Choi, and Y. W. Cho (2010) Piezoelectric inkjet printing of polymers: Stem cell patterning on polymer substrates. Polymer 51: 2147-2154. https://doi.org/10.1016/j.polymer.2010.03.038
- Mironov, V., R. P. Visconti, V. Kasyanov, G. Forgacs, C. J. Drake, and R. R. Markwald (2009) Organ printing: tissue spheroids as building blocks. Biomaterials 30: 2164-2174. https://doi.org/10.1016/j.biomaterials.2008.12.084
- Derby, B. (2012) Printing and prototyping of tissues and scaffolds. Science 338: 921-926. https://doi.org/10.1126/science.1226340
- Guillotin, B., et al. (2010) Laser assisted bioprinting of engineered tissue with high cell density and microscale organization. Biomaterials 31: 7250-7256. https://doi.org/10.1016/j.biomaterials.2010.05.055
- Guillemot, F., et al. (2010) High-throughput laser printing of cells and biomaterials for tissue engineering. Acta Biomater. 6: 2494- 2500. https://doi.org/10.1016/j.actbio.2009.09.029
- Guillemot, F., et al. (2010) Laser-assisted cell printing: Principle, physical parameters versus cell fate and perspectives in tissue engineering. Nanomedicine (Lond). 5: 507-515. https://doi.org/10.2217/nnm.10.14
- Zein, I., et al. (2002) Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials 23: 1169-1185. https://doi.org/10.1016/S0142-9612(01)00232-0
- Jakab, K., et al. (2006) Three-dimensional tissue constructs built by bioprinting. Biorheology 43: 509-513.
- Hockaday, L.A., et al. (2012) Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds. Biofabrication 4: 035005. https://doi.org/10.1088/1758-5082/4/3/035005
- Lee, J. Y., et al. (2013) Customized biomimetic scaffolds created by indirect three-dimensional printing for tissue engineering. Biofabrication 5: 045003. https://doi.org/10.1088/1758-5082/5/4/045003
- Shapeways, 3D Printing Helps Save and Separate Conjoined Texas Twins. http://www.shapeways.com. (2015).
- Psfk, 3D Printing Skin Grafts to Heal Burns. http://www.psfk.com. (2014).
- Michigan, U. O., Baby's life saved with groundbreaking 3D printed device from University of Michigan that restored his breathing. http://www.uofmhealth.org. (2013).
- CNN, Artificial eyes, plastic skulls: 3-D printing the human body. http://edition.cnn.com. (2014).
Cited by
- Market Prediction Methodology for a Medical 3D Printing Business : Focusing on Dentistry vol.23, pp.2, 2016, https://doi.org/10.21219/jitam.2016.23.2.263
- A Study of Orthognathic Surgical Splints Development Using 3D Convergence Technology vol.36, pp.3, 2019, https://doi.org/10.7736/kspe.2019.36.3.301