DOI QR코드

DOI QR Code

엘리베이터용 와이어로프와 CFRP UD의 벤딩 해석 비교

Comparison between Wire Rope and CFRP UD on Bending Analysis

  • 투고 : 2015.11.04
  • 심사 : 2015.12.27
  • 발행 : 2015.12.31

초록

인구밀도가 증가하고 매년 고층건물의 수가 늘어나고, 대부분의 사람들이 하루에 엘리베이터를 이용하는 시간이 많아짐에 따라 일상생활 속에서 엘리베이터는 중요한 역할을 하고 있다. 매년 고층건물이 늘어남에 따라 고속 고층 승강기의 기술 요구 수준도 높아져 가고 있다. Carbon-fiber-reinforced plastics (CFRPs)는 높은 강성과 경량화 및 낮은 마찰력 등을 장점으로 하고 있으며, 엘리베이터용 wire rope에 매우 적합한 재료이다. 본 논문에서는 CFRP의 특성을 분석하기 위하여, wire rope와 CFRP UD의 인장 강도 및 수치 해석을 통한 벤딩 해석 비교를 진행하였다.

With increasing population density and high-rise expansion of buildings in recent years, elevators have become to play a pivotal role in our everyday lives as most people take an elevator several times even in a day. The elevator penetration and distribution rates in Korea have increased dramatically every year, and the emergence of skyscrapers leads to accelerating the development of elevator industry. Carbon-fiber-reinforced plastics (CFRPs) exhibit better mechanical and thermal properties than steel suitable for uses as elevator wire ropes. In this paper, in order to analyze the properties of CFRPs, the tensile strength of unidirectional (UD) CFRP wire ropes was characterized and finite element analysis was conducted for bending simulation. Simulation results were compared.

키워드

참고문헌

  1. Rhiner, M. and Heling, K., "Understanding Elevator Rope: Performance, Endurance and Longevity are Addressed in this Examination of Rope", Elevator world, Vol. 57, No. 4, 2009, pp. 95-101.
  2. Franz, Andreas, Stahr, Konrad, "Elasticity Behavior of Elevator Ropes", Elevator World, Vol. 63, No. 7, 2015, pp. 86-118.
  3. Molkow, M. and Scheunemann, W., "Wire Rope for Elevator Suspension", Elevator World, Vol. 51, No. 5, 2003, pp. 100-117.
  4. Kwon, D.J., Wang, Z.J., Gu, G.Y., and Park, J.M., "Reinforcement, Thermal and Fire Retardant Improvement of Phenolic Composites by Surface Treatment of CFRP Chip", Journal of Adhesion and Interface, Vol. 13, No. 2, 2012.
  5. Giannis, S. and Hansen, K., "Investigation on the Joining of CFRP-to-CFRP and CFRP-to-Aluminium for a Small Aircraft Structural Application", Proceeding of the American Society for Composites Technical Conference, Vol. 25, No. 1, 2010, pp. 333-346.
  6. Herroelen, B., Brosens, K., and Van Cemert, D., "CFRP Roof Repair: A Large Scale Repair Using CFRP Laminates, Concree Engineering International, Vol. 2, No. 3, 1998, pp. 55-56.
  7. Kwon, J.B., Choi, J.Y., and Huh, H., "Evaluation and Prediction of Tensile Properties of CFRP Considering Strain Rate Effect", The Korea Society of Automotive Engineers, Vol. 2, No. 5, 2013.
  8. Kang, M.S., Park, H.S., Koo, J.M., and Seok, C.S., "Prediction of the Fracture Strength of CFRP Laminates according to Fiber Orientation", The Korea Society of Mechanical Engineers, No. 10, 2011, pp. 184-189.
  9. Kim, S.H., A Study on the Evaluation of Structure Integrity Considering Fatigue for Wire Rope, Ph.D Thesis, Yeungnam University, Korea, 2014.
  10. http://www.wire74.com, Tension capacity, 2015.11.03