A Study on Assessment of Advance and Overbreak in Underground Excavation Utilizing 3D Scanner

3D 스캐너를 이용한 지하공동의 굴진장 및 여굴 평가 기초연구

Abstract This study is to efficiently calculate and evaluate the elements of advance, overbreak and underbreak on the mine under the production using the 3D laser scanner. For this purpose, a 3D laser scanner was sued to acquire the point-cloud which records the space coordinates and modelling of the underground tunnel using the 3D modeling program. When each element was observed through the study result, the advance on the center cut was 2.6m in average while the total advance was 2.4m. If the drilling length of 3.8m is based, the advance rate was evaluated to be 67% in average in the center cut section with the total average of 64%. In addition, when the volume of overbreak was measured based on the design cross section, the average overbreak volume was found to be $4.5m^3$ on left wall, $4.5m^3$ on right wall, and $5m^3$ on roof with the total volume of $14m^3$. When the overbreak volume is measured based on the look-out cross section, it was $3m^3$ on roof with the total volume of $8.4m^3$. The rate of overbreak volume against the average excavation volume was 8% based on the design cross section and 5% based on the look-out cross section.

본 연구에서는 3차원 레이저 스캐너를 이용하여 채광 중인 광산을 대상으로 굴진장, 여굴, 미굴 등의 요소들을 효율적으로 산정하고 평가하고자 하였다. 이를 위하여 3차원 레이저 스캐너를 활용하여 공간좌표를 기록하는 point-cloud를 획득하였고, 3차원 모델링 프로그램을 이용하여 지하 공동을 모델링 하였다. 연구결과를 통해 각 요소들을 고찰하였을 때 심발부 굴진장은 평균 2.6m, 전체는 평균 2.4m로 나타났으며, 천공장 3.8m를 기준하여 굴진율은 평균 심발부 67%, 전체 64%로 평가되었다. 또한 설계 단면을 기준으로 여굴량을 측정한 결과로 평균 좌측벽 $4.5m^3$, 우측벽 $4.5m^3$, 천반 $5m^3$, 총 $14m^3$로 측정되었으며, look-out을 기준으로 여굴량을 측정한 결과 좌측벽 $3m^3$, 우측벽 $3.1m^3$, 천반 $2.3m^3$, 총 $8.4m^3$로 측정되었다. 평균 굴착량 대비 여굴량은 설계 단면 기준 약 8%, look-out 기준 약 5%로 평가되었다.