DOI QR코드

DOI QR Code

Optimal Design of PV Module with Bypass Diode to Reduce Degradation due to Reverse Excess Current

  • Jung, Tae-Hee (Photovoltaic Laboratory, Korea Institute of Energy Research(KIER)) ;
  • Kang, Gi-Hwan (Photovoltaic Laboratory, Korea Institute of Energy Research(KIER)) ;
  • Ahn, Hyung-Keun (Department of Electrical Engineering, Konkuk University)
  • 투고 : 2014.08.19
  • 심사 : 2014.09.22
  • 발행 : 2014.10.25

초록

In this paper, we present an economical and practical standard to install a bypass diode in a thin-film PV module. This method helps to reduce heat generation and to prevent module degradation due to excess current from reverse bias. The experimental results confirm that for different numbers of solar cells, there is a relation between the excess reverse current and the degradation of solar cells in a-Si:H modules. The optimal number of solar cells that can be connected per bypass diode could be obtained through an analysis of the results to effectively suppress the degradation and to reduce the heat generated by the module. This technique could be expanded for use in high power crystalline Si PV modules.

키워드

참고문헌

  1. S. Wendlandt, A. Drobisch, T. Buseth, S. Krauter, and P. Grunow, Proc. 25th European Photovoltaic Solar Energy Conference and Exhibition(EU PVSEC) (Valencia, Spain, 2010), p. 4002.
  2. J. Munoz, E. Lorenzo, F. Martinez-Moreno, L. Marroyo, and M. Garcia, Proc. in Photovoltaics: Research and Applications, Sci., 16, 693 (2008).
  3. M. Garcia, L. Marroyo, E. Lorenzo, J. Marcos, and M. Perez, Prog. in Photovoltaics: Research and Applications (2013).
  4. W. Herrmann, W. Wiesner, and W. Vaass, Proc. 26th IEEE Photovoltaic Specialists Conference (PVSC) (Anaheim, CA, 1997), p.1129.
  5. H. Yoshioka, S. Nishikawa, S. Nakajima, and M. Asai, Proc. 25th IEEE Photovoltaic Specialists Conference (PVSC) (Washington, DC,1996), p.1271.
  6. H. Yang, W. Xu, H. Wang, and M. Narayanan, Proc. 35th IEEE Photovoltaic Specialists Conference(PVSC), (Honolulu, HI, 2010), p.2806.
  7. J. W. Bishop, Solar Cells Sci., 25, 73 (1998).
  8. V. Quaschning and R. Hanitsch, Solar Energy Sci., 56, 513 (1996). https://doi.org/10.1016/0038-092X(96)00006-0
  9. Q. Zhang and Q. Li, Proc. 38th IEEE Photovoltaic Specialists Conference(PVSC) (Austin, TX, 2012), p.1344.
  10. J. Wohlgemuth and W. Herrmann, Proc. 31th IEEE Photovoltaic Specialists Conference(PVSC) (2005), p.1062.
  11. M. C. A. Garcia, W. Herrmann, W. Bohmer, and B. Proisy, Prog. in Photovoltaics: Research and Applications, Sci., 11, 693 (2003).
  12. W., Herrmann, M., Adrian, W., Wiesner, Proc. the Second World Conference on Photovoltaic Solar Energy Conversion(PVSEC) (Vienna, 1998), p. 2357.
  13. S. A. Spanoche, J. D. Stewart, S. L. Hawley, and I. E. Opris, IEEE Journal of Photovoltaics, Sci., 3, p.785, (2013). https://doi.org/10.1109/JPHOTOV.2012.2230054
  14. A. Zegaoui, P. Petit, M. Aillerie, J. P. Sawicki, and J. P. Charles, Energy Procedia, Sci., 18, 1247 (2013).
  15. H. Yang, H. Wang, and M. Wang, International Journal of Photoenergy, Scie., 2012, 1, (2012).
  16. C. Buerhop, D. Schlegel, M. Niess, C. Vodermayer, R. Weissmann, and C. J. Brabec, Solar Energy Material and Solar Cells, Sci., 107, 154 (2012). https://doi.org/10.1016/j.solmat.2012.07.011

피인용 문헌

  1. Analysis on thermal & electrical characteristics variation of PV module with damaged bypass diodes vol.35, pp.4, 2015, https://doi.org/10.7836/kses.2015.35.4.067
  2. Estimation of Output Power for PV Module with Damaged Bypass Diode using MATLAB vol.36, pp.5, 2016, https://doi.org/10.7836/kses.2016.36.5.063
  3. Classification conditions of cells to reduce cell-to-module conversion loss at the production stage of PV modules vol.103, 2017, https://doi.org/10.1016/j.renene.2016.10.047