한국공간구조학회논문집 (Journal of Korean Association for Spatial Structures)

  • 제14권3호
  • /
  • Pages.47-56
  • /
  • 2014
  • /
  • 1598-4095(pISSN)
  • /
  • 2287-7401(eISSN)
한국공간구조학회 (Korean Association for Spatial Structures)
권호 표지
DOI QR코드

DOI QR Code

프레임형 대공간 구조물의 절점강성변화에 따른 불안정 현상과 임계좌굴하중

Unstable Behaviour and Critical Buckling Load of Framed Large Spatial Structures in accordance with the Variation of Joint Rigidity

  • 투고 : 2014.05.21
  • 심사 : 2014.06.27
  • 발행 : 2014.09.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper investigates the characteristics of unstable behaviour and critical buckling load by joint rigidity of framed large spatial structures which are sensitive to initial conditions. To distinguish the stable from the unstable, a singular point on equilibrium path and a critical buckling level are computed by the eigenvalues and determinants of the tangential stiffness matrix. For the case study, a two-free node example and a folded plate typed long span example with 325 nodes are adopted, and these adopted examples' nonlinear analysis and unstable characteristics are analyzed. The numerical results in the case of the two-free node example indicate that as the influence of snap-through is bigger; that of bifurcation buckling is lower than that of the joint rigidity as the influence of snap-through is lower. Besides, when the rigidity decreases, the critical buckling load ratio increases. These results are similar to those of the folded-typed long span example. When the buckling load ratio is 0.6 or less, the rigidity greatly increases.

키워드

참고문헌

  1. Thompson JMT and Hunt GW(1983). On the buckling and imperfection-sensitivity of arches with and without prestress. International Journal of Solids and Structures, Vol 19(5), 445-459 https://doi.org/10.1016/0020-7683(83)90055-0
  2. El-Sheikh A(1998), Design of space truss structures, Structural Engineering and Mechanics, Vol 6(2), 185-200 https://doi.org/10.12989/sem.1998.6.2.185
  3. Lopez A, Puente I and Serna MA(2007), Numerical model and experimental tests on single-layer latticed domes with semi-rigid joints, Computers and Structures, Vol 85, 360-374 https://doi.org/10.1016/j.compstruc.2006.11.025
  4. Huseyin K(1973), The multi-parameter perturbation technique for the analysis of nonlinear system, International Journal of Nonlinear Mechanics, Vol 8(5), 431-443 https://doi.org/10.1016/0020-7462(73)90035-8
  5. Abedi K and Parke GAR(1991), Progressive collapse of single-layer braced domes, International Journal of Space Structures, Vol 11(3), 291-306
  6. Choong KK and Hangai Y(1993), Review on methods of bifurcation analysis for geometrically nonlinear structures, Bulletin of the International Association for Shell and Spatial structures, Vol 34(112), 133-149
  7. Choong KK and Kim JY(2001), A numerical strategy for computing the stability boundaries for multi-loading systems by using generalized inverse and continuation method, Engineering Structures, Vol 23, 715-724 https://doi.org/10.1016/S0141-0296(00)00071-7
  8. Lee SJ and Shon SD (2012.6) Dynamic instability and multi-step Taylor series analysis for space truss system under step excitation, Journal of Koran Society of Steel Construction, 24(3) 289-299 https://doi.org/10.7781/kjoss.2012.24.3.289
  9. Ha JH, Gutman S, Shon SD and Lee SJ(2013), Stability of shallow arches under constant load, International Journal of Non-linear Mechanics, Vol. 58, 120-127
  10. Bergan, PG(1980), Solution algorithms for nonlinear structural problems, Computers and Structures, Vol.12, 497-509 https://doi.org/10.1016/0045-7949(80)90125-X
  11. Bulenda Th and Knippers J(2001), Stability of grid shells, Computers and Structures, Vol 79, 1161-1174 https://doi.org/10.1016/S0045-7949(01)00011-6
  12. Chan SL and Zhou ZH(1995), Second-order elastic analysis of frames using single imperfect element per member, Journal of Structural Engineering, Vol 121, 939-945 https://doi.org/10.1061/(ASCE)0733-9445(1995)121:6(939)
  13. Kato S, Yamashita T, Nakazawa S, Kim Y and Fujibayashi A(2007), Analysis based evaluation for buckling loads of two-way elliptic paraboloidal single layer lattice domes, Journal of Constructional Steel Research, Vol 63, 1219-1227 https://doi.org/10.1016/j.jcsr.2006.11.014
  14. Hwang KJ and Knippers J(2010), Stability of single layered grid shells with various connectors, Proceeding of the ICSA 2010 Guimaraes, Portugal, 581-588
  15. Fan FMH, Cao Z and Shen SA(2011), new classification system for the joints used in lattice shells, Thin-Walled Structures, Vol 49, 1544-1553 https://doi.org/10.1016/j.tws.2011.08.002
  16. Steinboeck A, Jia X, Hoefinger G and Mang HA(2008), Conditions for symmetric, antisymmetric, and zero-stiffness bifurcation in view of imperfection sensitivity and insensitivity, Computer methods in applied mechanics and engineering, Vol 197, 3623-2626 https://doi.org/10.1016/j.cma.2008.02.016
  17. Jung HM(1997), An effect of equipment loading on the buckling characteristics of single-layer latticed domes, Journal of Korean society of steel construction, Vol 9(3), 323- 332
  18. Kwan TJ, Kim SD and Kim JM(1997), A study on the unstable behavior of pinconnected single-layer latticed domes considering geometric nonlinearity, Proceedings of the Computational Structural Engineering Institute Conference, Vol 10(1), 240-247
  19. Kim JK and Han SE(1998), The geometrically nonlinear analysis of single layer latticed domes by mode superposition method, Journal of Architectural Institute of Korea - Structure & Construction, Vol 14(4), 317-325
  20. Lee KS and Han SE(2009), A development of analytical strategies for elastic bifurcation buckling of the spatial structures, Journal of Korean society of steel construction, Vol 21(6), 563-574
  21. Shon SD, Kin SD, Lee SJ and Kim JS (2011.3) A study on the critical point and bifurcation according to load mode of dome-typed space frame structures, Journal of Korean Association for Spatial Structures, 11(1) 121-130 https://doi.org/10.9712/KASS.2011.11.1.121
  22. Lee SJ and Shon SD (2012.6) Characteristics of buckling load and bifurcation in accordance with rise-span ratio of space truss considering initial imperfection, Journal of Koran Society of Steel Construction, 24(3) 337-348 https://doi.org/10.7781/kjoss.2012.24.3.337
  23. Shon SD and Lee SJ (2013.3) Critical load and effective buckling length factor of dome-typed space frame accordance with variation of member rigidity, Journal of Korean Association for Spatial Structures, 13(1) 87-96 https://doi.org/10.9712/KASS.2013.13.1.087
  24. Uros M, Lazarevic D and Gidak P(2011), Interaction of member and node instability in the single layer reticulated shell, Proceeding of the IABSE-IASS symposium, London, 168
  25. Ma HH, Fan F and Shen SZ(2009), Numerical Parametric Investigation of Single-Layer Latticed Domes with Semi-Rigid Joints, Journal of the International Association for Shell and Spatial Structures, Vol. 49(2), 99-110
  26. Fan F, Yan J, Cao Z and Zhou Q(2010), Calculation methods of stability of single-layer reticulated domes considering the effect of initial bending of members, Proceeding of the IASS symposium, Shanghai, 339-347
  27. Shon SD, Lee SJ and Lee KG(2013), Characteristics of bifurcation and buckling load of space truss in consideration of initial imperfection and load mode, Journal of Zhejiang University-SCIENCE A, Vol. 14(3), 206-218 https://doi.org/10.1631/jzus.A1200114
  28. Schranz C, Krenn B and Mang HA(2006), Conversion from imperfection-sensitive into imperfection-insensitive elastic structures II: Numerical investigation, Computer methods in applied mechanics and engineering, Vol. 195, 1458-1479 https://doi.org/10.1016/j.cma.2005.05.025
  29. Steinboeck A, Jia X, Hoefinger G and Mang HA(2008), Conditions for symmetric, antisymmetric, and zero-stiffness bifurcation in view of imperfection sensitivity and insensitivity, Computer methods in applied mechanics and engineering, Vol. 197, 3623-2626 https://doi.org/10.1016/j.cma.2008.02.016
  30. Shon SD, Lee SJ and Choi JH(2012), Optimum structural design of space truss with considering in snap-thrugh buckling, Journal of Korean Association for Spatial Structures, Vol. 12(2), 89-98
  31. Shon SD, Kim SD, Hwang KJ and Kang MM(2003), A study of nonlinear unstable phenomenon of framed space structures considering joint rigidity, Journal of Korean Association for Spatial Structures, Vol. 3(1), 87-97
  32. Shon SD, Hwang KJ and Lee SJ(2014), Numerical evolution of buckling behavior in space structures considering geometrical parameters with joint rigidity, Journal of Central South University, Vol. 21(3), 1115-1124 https://doi.org/10.1007/s11771-014-2044-y